Bolton 4 Axis CNC Milling Machine 118×394 Table Size

Bolton 4 Axis CNC Milling Machine 118x394 Table SizeBolton 4 Axis CNC Milling Machine has large travels in the size of 17.71 by 11.42 by 11.02 inches, delivers spindle speeds of 100-3000 RMP. It features spindle motor (AC 2HP 3-phase or 1-phase). Bolton 4 Axis CNC Milling Machine has great CNC control and delivers full CNC automatic operation. It has amazing features like tool length and cutter compensation, Y-axis bedway metal cover, variable speed inverter drive motor, high accuracy ball screws grade p4. It requires manual lubrication and has great coolant system. Read more…


Highlights

  • Spindle speeds – 100-6000RPM
  • Voltage – 220V
  • Vertical travel(Z) – 11.02″
  • Work table area – 11.8″x39.4″
  • Cross trave(y) – 11.42″

Related Videos


[home]

CNC Milling Machine Rotational Axis CNC Router Rotary Table Rotary a axis 4th Axis 65mm 3 Jaw Chuck Dividing Head w/ Nema17 stepper motor w/ 54mm Tailstock Reducing ratio 4:1 for CNC Engraving Machine


CNC Milling Machine Rotational Axis CNC Router Rotary Table Rotary a axis 4th Axis 65mm 3 Jaw Chuck Dividing Head w/ Nema17 stepper motor w/ 54mm Tailstock Reducing ratio 4:1 for CNC Engraving Machine

$165.00 @ Amazon.com

Product Description

♞【Rotation 4th Axis】Model:K11-65mm; Chuck Type:K01-63mm 3 Jaw Chuck;54 mm tailstock

♞【Feature】K11-65mm with three-jaw centering chuck: middle height: 54mm, total height: 85mm, angle: 0.3°/step, diameter of gear output shaft: 20 mm, reduction ratio: 4:1 (belt delay mode).

♞【Stepper motor】Nema17 2-phase stepper motor 45N.cm (64oz-in) 1.7A

♞【Advantages】Rust-proof dust cover, polishing and anode oxidation cover, rust protection coating. ,stable 3 jaw chuck structure,fine workmanship,solid and practical jaw, excellent process to maximize service life.

♞【Application】 The fourth axis can be used for three-dimensional processing of cylinders, bends and circles. The fourth axis engraving machine can be used for engraving spirals, scars, bamboo joints, etc.

Product Details
Brand: CNCTOPBAOS
Model #: K11-65
Size: 65mm
Price: $165.00
CNC Milling Machine Rotational Axis CNC Router Rotary Table Rotary a axis 4th Axis 65mm 3 Jaw Chuck Dividing Head w/ Nema17 stepper motor w/ 54mm Tailstock Reducing ratio 4:1 for CNC Engraving Machine

CNCTOPBAOS K12-100mm CNC Router Milling Machine Rotational Axis 4th Axis A axis Rotary Table A axis 100mm 4 jaw chuck dividing head,MT2 65mm Tailstock Reducing ratio 6:1 for CNC Engraving Machine


CNCTOPBAOS K12-100mm CNC Router Milling Machine Rotational Axis 4th Axis A axis Rotary Table A axis 100mm 4 jaw chuck dividing head,MT2 65mm Tailstock Reducing ratio 6:1 for CNC Engraving Machine

$313.00 @ Amazon.com (Save 5%)

Product Description

♞【Rotation 4th Axis】Model:K12-100mm; Chuck Type:K12-100mm 4 Jaw Chuck;Inner through hole diameter/shaft hollow diameter is 22mm; with accessories:1 Set of Anti-claw and wrenches

♞【Stepper motor】Nema23 2-phase 3A stepper motor 57x57x76mm 4-lead wires: Red wire=A+;Green wire=A-;Yellow wire=B+;Blue wire=B- port.

♞【MT2 Tailstock】Center height: 65mm;Total height: 115mm 【Reducing ratio】6:1 (belt deceleration mode) ; Angle: 0.3 ° / step

♞【Advantages】Rust proof coating process,stable 4 jaw chuck structure,fine workmanship,solid and practical jaw, excellent process to maximize service life.

♞【Application】 The fourth axis can be used for three-dimensional processing of cylinders, bends and circles. The fourth axis engraving machine can be used for engraving spirals, scars, bamboo joints, etc.

Product Details
Brand: CNCTOPBAOS
Price: $313.00 (Save 5%)
CNCTOPBAOS K12-100mm CNC Router Milling Machine Rotational Axis 4th Axis A axis Rotary Table A axis 100mm 4 jaw chuck dividing head,MT2 65mm Tailstock Reducing ratio 6:1 for CNC Engraving Machine

LUNYEE 3018 PRO MAX CNC Machine 500W All-Metal CNC Router Machine 3 Axis Limit Switches & Emergency-Stop with GRBL Offline Control for Cutting Wood Acrylic MDF Plastic, Working Area: 300 x 180 x 80mm


LUNYEE 3018 PRO MAX CNC Machine 500W All-Metal CNC Router Machine 3 Axis Limit Switches & Emergency-Stop with GRBL Offline Control for Cutting Wood Acrylic MDF Plastic, Working Area: 300 x 180 x 80mm

$359.00 @ Amazon.com (Save 5%)

Product Description

500W Spindle & High Speed CNC Router Machine: The 500w Spindle is a Robust and Versatile Component Design. Its High-power Output Enables It to Deliver Consistent Performance, Even When Cutting Through Dense Materials Like Aluminum and Copper. This Powerful Spindle Ensures That Your Machine can Tackle Even The Most Demanding Projects While Maintaining Precision And Efficiency. The Maximum Movement Speed can Reach 5000mm/Min. The Spindle Speed Range is 0-12000RPM/Min.

3018 Pro Max All Metal Structure: All-metal Construction, Have Durability, Stability, and Reliability. By Using Reinforced Aluminum Profiles, The Machine Frame can Withstand Heavy Loads and Resist Wear And Tear Over Time. Furthermore, No Plastic Parts (Except For Electrical Components) Ensures That The Frame Maintains Its Structural Integrity Even in Harsh Operating Conditions.

Extra Long Z-Axis Travel: The New Design Makes This Machine Have The Longest Z-axis Stroke Among (80mm) The Standard Models on The Market.additionally, Our Machine Frame Incorporates a 12mm Optical Axis, Which Provides Precise Linear Motion and Accurate Positioning. This Feature is Crucial For Maintaining The Performance and Efficiency of Various Machinery and Automated Systems.We Provide Dedicated Upgrade Kit for 12mm, Please Contact us if Necessary(Upgrade Kit is Sold Separately).

3018 CNC Unparalleled Security: The 3018 CNC Machine Boasts a Robust Safety System with 6 Limit Switches and an Emergency Stop Button, Ensuring Optimal User Safety While Effectively Preventing Any Potential Abnormal Machine Conditions. Moreover, The Xyz Axis is Thoughtfully Outfitted with Manual Handwheels, Enabling Seamless and Accurate Positioning of The Machine Origin, Thereby Enhancing Overall Operational Efficiency and Facilitating a Highly Convenient Working Process.

Two-in-One CNC Machine: The Ability to Switch Between Spindle and Laser Modes Allows Users to Perform a Wide Range of Tasks with a Single Machine, From Cutting and Engraving to Marking and Etching. Having Versatile Equipment That can Adapt to Different Tasks and Materials is Essential for Maximizing Productivity and Efficiency.

Auxiliary instructions: We provide Machine Installation and Wiring Videos. Please Watch Them on the Product Link Page. The Package Contains a 4G USB Flash Drive and the Relevant Software has been Pre-installed.

Product Details
Brand: LUNYEE
Model #: 3018PRO MAX
Color: 500w
Dimensions: 7.09 X 0.01 X 11.81 Inches (Length X Width X Height)
Price: $359.00 (Save 5%)
LUNYEE 3018 PRO MAX CNC Machine 500W All-Metal CNC Router Machine 3 Axis Limit Switches & Emergency-Stop with GRBL Offline Control for Cutting Wood Acrylic MDF Plastic, Working Area: 300 x 180 x 80mm

FoxAlien Masuter Pro CNC Router Machine, Upgraded 3-Axis Engraving All-Metal Milling Machine for Wood Acrylic MDF Nylon Carving Cutting


FoxAlien Masuter Pro CNC Router Machine, Upgraded 3-Axis Engraving All-Metal Milling Machine for Wood Acrylic MDF Nylon Carving Cutting

$649.00 @ Amazon.com (Save 7%)

Product Description

Structure Upgrade: Masuter Pro is an All-Aluminum CNC router machine. The Z-axis uses Linear Rail instead of rods and T8 lead screw, this greatly improves the stability and accuracy.

Upgraded Controller Box: Compact controller box desgin. The emergency stop button and home button are more easily and more convenient to access. The control box is also dust-proof for easy maintenance.

Compatibility Upgrade: Masuter Pro includes 2 spindle clamps: 52mm & 65mm. The 52mm clamp can accommodate the 60W spindle, 300W spindle and the FoxAlien 20W/40W modules. The 65mm clamp is for customized upgrade, such as 65mm router, 1.5KW spindle, etc. It also supports the 69mm spindle clamp, please buy separately.

Assembly Upgrade: Main parts are pre-assembled, and the part of the wires are pre-wired to the controller box. A detailed assembly guide is included. We provide step by step assembly manual.It takes only 10-15 minutes to fully assemble.

Large Engraving Area: The active working area is 15.75” x 15.75” x 2.36” (400 x 400 x 60mm). It is large enough for daily woodworking. It supports extension kit to enlarge the working area. It supports entension kit (B0BHH3Y8X2).

Product Details
Brand: FoxAlien
Model #: Masuter Pro
Warranty: 1 year manufacturer warranty
Color: Masuter Pro
Dimensions: 25.984251942 X 25.984251942 X 12.598425184 inches (Length X Width X Height)
Price: $649.00 (Save 7%)
FoxAlien Masuter Pro CNC Router Machine, Upgraded 3-Axis Engraving All-Metal Milling Machine for Wood Acrylic MDF Nylon Carving Cutting

CNCTOPBAOS CNC Router 4th Axis Rotation A axis,Engraving Milling Machine Rotary Table 3 Jaw 100mm Chuck Dividing Head,Gapless Harmonic Reducer Gearbox Ratio 100:1 w/ 65mm Tailstock


CNCTOPBAOS CNC Router 4th Axis Rotation A axis,Engraving Milling Machine Rotary Table 3 Jaw 100mm Chuck Dividing Head,Gapless Harmonic Reducer Gearbox Ratio 100:1 w/ 65mm Tailstock

$399.00 @ Amazon.com

Product Description

【Chuck Type】 K11-100mm 3 Jaw Chuck Zero Backlash with Gapless harmonic gearbox reducer

【Stepper motor】 Nema23 2-phase 57x57x56mm stepper motor 3A 1.2Nm 4 Lead

【Center height】 65mm;Total height: 115mm

【Reducing ratio】100:1

【Accessories】Set of Anti-claw and wrenches

Product Details
Brand: CNCTOPBAOS
Model #: K11-100mm 100:1
Size: 3 jaw 100:1
Color: K11-100mm-100:1
Price: $399.00
CNCTOPBAOS CNC Router 4th Axis Rotation A axis,Engraving Milling Machine Rotary Table 3 Jaw 100mm Chuck Dividing Head,Gapless Harmonic Reducer Gearbox Ratio 100:1 w/ 65mm Tailstock

Genmitsu CNC Router Machine 4040-PRO for Woodworking Metal Acrylic Cutting Milling, GRBL Control, Lead Screw Driven, 3 Axis CNC Engraving Machine, Working Area 400 x 400 x 78mm (15.7” x 15.7” x 3.1”)


Genmitsu CNC Router Machine 4040-PRO for Woodworking Metal Acrylic Cutting Milling, GRBL Control, Lead Screw Driven, 3 Axis CNC Engraving Machine, Working Area 400 x 400 x 78mm (15.7” x 15.7” x 3.1”)

$599.00 @ Amazon.com

Product Description

An effective working area of 15.7” x 15.7” x 3.1” is large enough for most daily wood carving projects. The redesigned Z-axis carriage makes swapping a spindle easier. Adding more screw holes on the non-all-in-one Z-axis carriage allows you to install the larger spindle higher for extra overfeed height.

New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the milling machine.

Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a Air Assistance Pump Port, and MPG Port.

All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don’t need to replace the whole spoilboard when a panel gets damaged.

The 4040-PRO CNC machine is supplied with 42mm and 52mm spindle mounts. The additional 65mm (B0BRZSY475), 69mm (B0BRZSVVK3) spindle mount, and other upgraded accessories are available to order. You can easily upgrade the machine according to your needs. If you get stuck, check out the SainSmart Resource Centre (see User Guide) or contact us with any questions you may have.

It supports adding the 4th-axis rotary module kit. The 4th-axis kit enables your 4040-PRO desktop CNC to carve from different angles and positions or with the right software full 3D rotary caving.

Product Details
Brand: Genmitsu
Model #: 4040-PRO
Price: $599.00
Genmitsu CNC Router Machine 4040-PRO for Woodworking Metal Acrylic Cutting Milling, GRBL Control, Lead Screw Driven, 3 Axis CNC Engraving Machine, Working Area 400 x 400 x 78mm (15.7” x 15.7” x 3.1”)

Mophorn Milling Working Table 17.7 X 6.7 Inch, Compound Milling Machine Work Table 2 Axis 4 Ways Move, Multifunction Milling Working Table Heavy-duty Structure,for Milling and Drilling Machine


Mophorn Milling Working Table 17.7 X 6.7 Inch, Compound Milling Machine Work Table 2 Axis 4 Ways Move, Multifunction Milling Working Table Heavy-duty Structure,for Milling and Drilling Machine

$115.81 @ Amazon.com

Product Description

【PREMIUM QUALITY STRUCTURE】- Built by heavy-duty cast iron material, which is anti-corrosion and rust resistance, angle milling table can withstand the tough environment and designed for long service time.

【HIGHLY POLISHING & STIFFNESS】- The compound slide table, with great hardness and stiffness, is high ground and not easy deformation. Three precise T-slots can meet different force requirements.

【2 AXIS 4 WAYS MOVE】- Handles with trapezoidal thread spindles is easy to adjust the directions. X-axis travel: 210 mm, Y-axis travel: 110 mm. With a precise scale on it, you can adjust the optimal working position as you need.

【TIGHTNESS ADJUSTMENT】- Equipped with several quality bolts and nuts, you can easily adjust the tightness of this cross slide table. Convenient for your use.

【WIDE APPLICATION AREA】- This milling working cross table machine is great for mounting on drilling machines for precise positioning. It can be used for most types of milling and drilling, ideal for all drill stands, drilling, and milling machines.

Product Details
Brand: Vevor
Model #: Milling Working Table
Size: 17.7 x 6.7 in
Color: 17.7 X 6.7 Inch
Price: $115.81
Mophorn Milling Working Table 17.7 X 6.7 Inch, Compound Milling Machine Work Table 2 Axis 4 Ways Move, Multifunction Milling Working Table Heavy-duty Structure,for Milling and Drilling Machine

Genmitsu CNC Router Machine PROVerXL 4030 for Wood Metal Acrylic MDF Carving Arts Crafts DIY Design, 3 Axis Milling Cutting Engraving Machine, Working Area 400 x 300 x 110mm (15.7''x11.8''x4.3'')


Genmitsu CNC Router Machine PROVerXL 4030 for Wood Metal Acrylic MDF Carving Arts Crafts DIY Design, 3 Axis Milling Cutting Engraving Machine, Working Area 400 x 300 x 110mm (15.7

$949.00 @ Amazon.com (Save 5%)

Product Description

Easy to Set Up: The pre-assembled module of XYZ axis and wires dramatically reduces effort of assembly, allowing you to start carving your projects in less time. 3-Month Carveco Maker Subscription is included. Turning your ideas into the next fun project or your own work of art will be much easier with Carveco Maker. We will email you the subscription link after you place the order.

More Power: New completely redesigned control box and drive system, beefy C-BEAM Frame, precision NEMA 23 stepper motors, High Power Spindle and included adapter for a drop in Dewalt DWP611 upgrade.

No additional parts required: Everything you need out of the box, no stripped down kits or addons, the Genmitsu PROVerXL 4030 CNC router already includes all of the accessories and components you need at an affordable price, including XYZ axis limit switches, emergency stop switches,speed control, Z-probe and more.

Precision and Performance: Rigid C-beam structure,Leadscrew Driven, Y-axis Dual screw drive, Z-Axis Optical Axis Drive delivers more stability than the traditional v-slot drive. It's ideal for an endless variety of cutting, drilling, and carving operations on various materials including wood, MDF, plastics, foams, vinyl, and aluminum.

Built to suit your needs: The PROVerXL CNC platform is just the beginning, if you are looking for an even larger machine get the upgrade kit available in 2 additional sizes 24”x 24”( 600 x 600mm), and up to 40” x 40” (1000 x 1000mm). Equip your machine with High Powered Laser Modules with up to 15W of true power output. Evolve with your CNC, upgrade as you go, or start big and get to making MORE.

Product Details
Brand: Genmitsu
Model #: PROVerXL 4030
Dimensions: 15.748 X 15.748 X 4.3307 inches (Length X Width X Height)
Price: $949.00 (Save 5%)
Genmitsu CNC Router Machine PROVerXL 4030 for Wood Metal Acrylic MDF Carving Arts Crafts DIY Design, 3 Axis Milling Cutting Engraving Machine, Working Area 400 x 300 x 110mm (15.7''x11.8''x4.3'')

MUKLEI 12.2 Inches Milling Machine Worktable, Multifunction Mill Working Table, X-Y Axis Milling Machine for Mini Drill and Drill Bracket


MUKLEI 12.2 Inches Milling Machine Worktable, Multifunction Mill Working Table, X-Y Axis Milling Machine for Mini Drill and Drill Bracket

$35.59 @ Amazon.com

Product Description

HIGH QUALITY WORKTABLE - Made of premium aluminum alloy, the milling machine worktable is sturdy, heavy-duty, anti-rust, and corrosion-resistant. The table works very smoothly and precisely. It can move left and right, forward and backward without getting stuck.

ADJUSTABLE SCREW - There are 6 adjustable screws on the base of the multifunction worktable. 3 pieces on the X-axis and 3 on the Y-axis. There is a lock-nut on each screw, and you need to loosen the lock nut to adjust the screw. Slightly tighten the lock nut to remove any looseness in the cross-slide.

WHAT YOU GET - A package contains a piece of mill machine with a size of 12.2 x 3.5 x 3 inches. It is composed of several parts, including the adjustable scale, the travel screw, the fixed jaw, the cross-slide, and the base.

MULTI-PURPOSE MACHINE - The multifunction worktable is designed to work with bench drills. the worktable is widely used in garages, workshops, hardware stores, construction sites, and more. Whether you are a beginner or a professional, it will never let you down.

NICE AFTER-SALES - We guarantee to provide you with a trustworthy refund service within 30 days. Please feel free to contact us if you have any dissatisfaction or improvement problems about scissor jacks , and we will reply you as soon as possible within 24 hours.

Product Details
Brand: MUKLEI
Model #: YUUHJUN
Price: $35.59
MUKLEI 12.2 Inches Milling Machine Worktable, Multifunction Mill Working Table, X-Y Axis Milling Machine for Mini Drill and Drill Bracket

RATTMMOTOR 3018 Pro DIY CNC Router Kit, 3 Axis Hobby CNC Router Machine GRBL Control, Plastic Acrylic PVC PCB Wood Mini Desktop Engraving Milling Carving Machine, Working Area 300x180x45mm


RATTMMOTOR 3018 Pro DIY CNC Router Kit, 3 Axis Hobby CNC Router Machine GRBL Control, Plastic Acrylic PVC PCB Wood Mini Desktop Engraving Milling Carving Machine, Working Area 300x180x45mm

$143.99 @ Amazon.com

Product Description

【Upgrade Version CNC 3018 PRO】※ Frame size: 42x35x27CM (16.53 x 13.78 x 10.63”). Working area:18x10x4.5CM(11.8 x 7.1 x 1.8”). Material: Aluminum Alloy. Spindle: 775 spindle motor (12-24V) 24V:10000r/min. Stepper motor: 42 stepper motor, 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m

【Material/Dimensions】※ The fixed external frame is made of black injection molding material, working table is aluminum alloy material. Screw rods uses stainless steel quality. It can able to engraving in plane by moving X/Y/Zaxis. High precision and durability and good appearance.

【Simple Assembly/Use】※ This mini cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and USB flash drive of all the files.

【Update GRBL Board】※ The updated control board has added the functions of supporting emergency stop button and X/Y/Z axis limit, and the functions are more complete. Users can design and equip those DIY accessories suitable for this mini engraving machine according to their own needs. Equipped with a silent cooling fan, which can dissipate heat quickly during operation, with low noise and good quality. Also, the control board can automatically identify the offline controller, support PWM.

【Applicable Engraving Material】※ CNC 3018 PRO machine can not only engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and so on, but also soft metal like copper, aluminum and the similar materials. Howerever, harder materials cannot be engraved such as glass, hard metal, jade, ect.

Product Details
Brand: RATTMMOTOR
Model #: 3018PRO
Size: CNC3018PRO
Color: Cnc3018pro
Price: $143.99
RATTMMOTOR 3018 Pro DIY CNC Router Kit, 3 Axis Hobby CNC Router Machine GRBL Control, Plastic Acrylic PVC PCB Wood Mini Desktop Engraving Milling Carving Machine, Working Area 300x180x45mm

Leave a Comment

Your email address will not be published. Required fields are marked *