Tag: DELTA

DELTA 15-334 15-Inch Variable Speed Drill Press w/Tilting Table Three Phase 200V w/Magnetic Starter

Posted by Thomas – October 17, 2011

  • Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
  • Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
  • Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
  • Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
  • Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.

Amazon.com Product Description
The DELTA 15-334 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor that has a 24-volt push-button, magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.

DELTA 15-334 15-Inch Variable Speed Drill Press w/Tilting Table Three Phase 200V w/Magnetic Starter

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

DELTA 15-261 15-Inch 6 Speed Drill Press w/Production Table Single Phase

Posted by Thomas – October 15, 2011

  • Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubrcated-for-life ball bearings.
  • Wide, test-proven speed range gives you a true 10-to-1 speed ratio.
  • Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring loaded, rubber-tipped plunger that quickly restores correct belt tension.
  • Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
  • Six speeds offer unbelievably wide range of speeds with a low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500 rpm- 11.8 to 1 speed ratio.

Amazon.com Product Description
The DELTA 15-261 features a 3/4 HP single-phase motor that provides six speeds varying from 425 to 5500 RPM, and is capable of all drill jobs on different materials. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.

DELTA 15-261 15-Inch 6 Speed Drill Press w/Production Table Single Phase

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

Delta 15-343 15-inch Variable Speed Production Floor Drill Press

Posted by Thomas – September 11, 2011

Product Description
The Delta 15-343 15-inch Variable Speed Production Floor Drill Press features a 3/4 HP single-phase motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. Features: Extra-large spindle bearings and spindle pulleys that are supported by lubricated-for-life ball bearings Quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs Snubber feature holds speed settings constant no matter the load conditions. Table tilts 90 degrees in both directions What’s in The Box: Delta 15-343 15-inch Variable Speed Production Floor Drill Press Self-Ejecting Chuck Key Self-Locking Depth Stop Depth Gauge

Delta 15-343 15-inch Variable Speed Production Floor Drill Press

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

Delta 15-231 15-inch 6 Speed Drill Press with Tilting Table

Posted by Thomas – April 30, 2011

Product Description
The Delta 15-231 15-inch 6 Speed Drill Press with Tilting Table has a 3/4 HP single-phase motor that provides six speeds varying from 425 to 5500 RPM and is capable of all drill jobs on different materials. The Delta 15-231 maintains proper belt tension automatically so you’ll always have full power transmission. Features: Extra-large spindle bearings and spindle pulleys that are supported by lubricated-for-life ball bearings Quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs Snubber feature holds speed settings constant no matter the load conditions. Table tilts 90 degrees in both directions and measures 11 x 14 inches What’s In The Box: Delta 15-231 15-inch 6 Speed Drill Press with Tilting Table Self-Ejecting Chuck Key Self-Locking Depth Stop Depth Gauge

Delta 15-231 15-inch 6 Speed Drill Press with Tilting Table

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

DELTA Machinery 15-331 NA 15-Inch Variable Speed Drill Press w/Tilting Table Single Phase 15-331

Posted by Thomas – April 24, 2011

  • Extra-large spindle bearings 6 PLUS 6 and VS6- spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings. Massive quill is a full 2-inch diameter.
  • Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
  • Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
  • Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
  • Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.

Amazon.com Product Description
The DELTA 15-331 Variable Speed Drill Press features a 3/4 HP single-phase motor that has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.

DELTA Machinery 15-331 NA 15-Inch Variable Speed Drill Press w/Tilting Table Single Phase 15-331

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

DELTA 15-126 15-Inch RAM Radial Drill Press Single Phase

Posted by Thomas – March 11, 2011

  • Machine tool capacity and performance combined with power tool adaptability and versatility
  • Extra drilling capacity allows you to take the drill right to the work
  • Built in jackshaft assembly provides 16 different speeds from 175 rpm to 8,200 rpm
  • Head tilts a full 45 degree right or left with easy-to-read head tilt angle scale that permits setting of head at exact angle
  • Big cast-iron machined table has four T-Slots and oil trough tapped to accommodate 1/2-inch pipe; 42-inch column for extra spindle nose to table capacity and a big 6-inch quill stroke with a ram travel of 17-inch

Amazon.com Product Description
The DELTA 15-126 15-inch RAM Radial Drill Press Single Phase provides the versatility of a power tool with the capacity and performance of a machine tool. The drill features a 1/2 HP single-phase motor and provides a range of 16 different speeds that vary from as low as 175 RPM up to 8200 RPM. The large 26 x 18-inch table is made of cast iron and provides four T-Slots and an oil trough that can handle a half-inch pipe. The head tilts 45-degrees in either direction, and has an easy-to-read scale. With a 42-inch column, the press has extra spindle nose to table capacity, and has a six-inch quill stroke with a ram travel of 17 inches. The press is smartly designed with convenient controls such as an adjustable quill return spring, quill lock knob, and more. The 15-126 includes six-inch spindle travel, No. 2 MT spindle, 42-inch column, 65-863 floor stand, head, jackshaft assembly, ram, cradle, column, table, raising mechanism, belt guards, motor pulley, 49-287 V-belt, 49-105 V-belt, motor and controls.

DELTA 15-126 15-Inch RAM Radial Drill Press Single Phase

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

DELTA 15-344 15-Inch Variable Speed Drill Press w/Production Table Three Phase 200V w/Magnetic Starter

Posted by Thomas – February 9, 2011

  • Extra-large spindle bearings 6 PLUS 6 and -inchVS6-inch spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
  • Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
  • Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
  • Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling…PLUS, the extra stroke required for clearing jigs and fixtures
  • Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.

Amazon.com Product Description
The DELTA 15-344 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.

DELTA 15-344 15-Inch Variable Speed Drill Press w/Production Table Three Phase 200V w/Magnetic Starter

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

Delta 18-900L 18-Inch Laser Drill Press

Posted by Thomas – January 12, 2011

  • Auto-Tensioning Belt Drive System allows for fast and easy speed changes while maximizing transmission efficiency with consistent belt tension and motor alignment.
  • Full 6-inch Quill Stroke for deeper drilling applications and Best-In-Class capacity.
  • Micro-Adjustable Depth Stops and Independent Depth Scale allows the user to zero the scale and set up for repetitive drilling, quickly and easily.
  • Fully Adjustable TWINLASER projects a bright red crosshair on the work piece at the point of bit contact.

Product Description
Precision drilling is a snap with the DELTA 18-900L 18-inch Laser Drill Press. This powerful drill press features sixteen speeds for drilling a variety woods, plastics, and metals, and the rack-and-pinion table is silky smooth when raising and lowering it to the desired height. The adjustable-position locking system allows for easy angle adjustments for repetitive drilling. The bright laser make certain that drilling accuracy is perfect every time.Amazon.com Product Description
Rugged and versatile enough for professional use, the DELTA 18-900L 18-Inch Laser Drill Press features a heavy-duty motor for powerful performance, and an Auto-Tensioning Belt Drive System for effortless speed changes. Designed to provide the accuracy and precision you need to get the job done right the first time, this tool is ideal for woodworking.

callout box top
18-Inch Laser Drill Press
At a Glance:
  • Provides a full 16 drilling speeds (170 – 3,000)

  • Full 6-inch quill stroke for best-in-class capacity
  • Oversized woodworker’s table bevels 0-90 degrees left and right
  • Dimensions: 20 by 70 by 28 inches (W x H x D); 5/8-inch key chuck capacity
  • Backed by a five-year warranty
callout box bottom
DELTA 18-900L 18-Inch Laser Drill PressThis professional-grade drill press is ideal for woodworking with a wide range of soft and hard woods. View larger.

16 Speeds for Drilling in a Variety of Materials
Precision drilling is easy with the DELTA Laser Drill Press. It features sixteen speeds for optimal drilling performance in various materials. The rack-and-pinion height adjustment on the oversized woodworker’s table is easily raised and lowered to the desired height. The adjustable locking levers allow for easy angle adjustments to the table top while the bright TWINLASER helps provide drilling accuracy every time.

Auto-Tensioning Belt Drive System for Efficient Performance
The 18-900L is unique among other drill presses because of its time-saving Auto-Tensioning Belt Drive System, which ensures fast, easy speed changes while maximizing transmission efficiency with consistent belt tension and motor alignment.

6-Inch Quill Stroke and Best-in-Class Capacity
With a full 6-inch quill stroke, the 18-900L allows for deeper drilling or industrial applications and best-in-class capacity.

Robust Motor and Over-Sized Table for Power and Versatility
Powered by a 3/4-horsepower induction motor, the 18-900L can easily take on demanding applications. Its oversized worker’s table features a patented design and bevels 0-90 degrees left and right, tilts forward 0-48 degrees. The unit has T-slots for clamping, and a removable/replaceable center insert for through-the-table drilling.

Precise, Accurate, and User-Friendly
The 18-900L also features micro-adjustable depth stops and an independent depth scale, which allows the user to zero the scale and set up for repetitive drilling in just seconds. At the same time, an LED light illuminates the work surface for visibility, and the non-tip cast iron base provides maximum stability.

Warranty Information
The DELTA 18-900L 18-Inch Laser Drill Press is backed by a five-year warranty.

What’s in the Box
18-Inch Laser Drill Press with oversized table, and manual.



DELTA 18-900L 18-Inch Laser Drill PressMicro-adjustable depth stops with an independent depth scale mean you can zero the scale and set up for repetitive drilling in seconds.


Delta 18-900L 18-Inch Laser Drill Press

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

My new 12″ Delta Drillpress

Posted by Thomas – August 20, 2010


Drilling wood plug

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

Delta Drill Press

Posted by Thomas – June 12, 2010


Delta Drill Press SN 53E3PE

Related Blogs

    Share and Enjoy:
    • Digg
    • del.icio.us
    • Facebook
    • NewsVine
    • Reddit
    • StumbleUpon
    • Google Bookmarks
    • Yahoo! Buzz
    • Twitter
    • Technorati
    • Live
    • LinkedIn
    • MySpace

    Powered by Yahoo! Answers

    Powered by WP Robot