WEN DPA2412T 24 in. x 12 in. Drill Press Table with an Adjustable Fence and Stop Block
$41.96
@ Amazon.com (Save 16%)
Product DescriptionExpand your workspace by 275 square inches (23-7/8 inch width, 11-7/8 inch depth)
Spacious table measures in at 23-7/8 x 11-7/8 x 1 inches
Fits any drill press table between 5 and 16 inches in width
Designed to fit the entire WEN Drill Press Series
Product Details| Brand: | WEN |
|---|
| Model #: | DPA2412T |
|---|
| Color: | Metallic |
|---|
| Dimensions: | 11.88 X 23.88 X 1 inches (Length X Width X Height) |
|---|
| Price: | $41.96 (Save 16%) |
|---|
WEN DPA2412T 24 in. x 12 in. Drill Press Table with an Adjustable Fence and Stop Block
1/2"x 24" Auger Drill Bit for Wood,Hex Shank Tri Flute Wood Drill Bit for Soft and Hard Wood,Plastic,Drywall and Composite Materials
Product DescriptionAuger Drill bit Drilling diameter:1/2",Total length:24",Hex Shank:3/8".Perfect for drilling into soft and hard wood.
Constructed from top 1045 high Carbon Steel,this drill bit incorporates Tri Flute solid center design for enhanced rigidity during boring.Its cutting flute is precision-milled with hollow centers to expedite chip clearance.
Wide lands keep the bit straight as it bores through the hole.The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter,producing a faster,cleaner cut.
Self-Positioning point tip provides accurate positioning Suitable for drilling into both soft and hard woods,MDF, plywood,lumber,landscape timber,and for installing PVC pipes or boring tree stumps(not for metal).
Each drill bit comes packaged in a reusable PVC tube,ensuring effortless storage,longevity,and safe handling.
Product Details| Brand: | WOBLLMX |
|---|
| Size: | 1/2 in |
|---|
| Price: | $26.89 |
|---|
1/2"x 24" Auger Drill Bit for Wood,Hex Shank Tri Flute Wood Drill Bit for Soft and Hard Wood,Plastic,Drywall and Composite Materials
Drill America - DWDDL12X13/32 13/32" x 12" High Speed Steel Extra Long Drill Bit, DWDDL Series
Product DescriptionHigh-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
Round shanks allow use with a wide variety of toolholding systems
When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families
Product Details| Brand: | Drill America |
|---|
| Model #: | DWDDL12X13/32 |
|---|
| Size: | 13/32" |
|---|
| Color: | Uncoated (Bright) |
|---|
| Price: | $24.12 |
|---|
Drill America - DWDDL12X13/32 13/32" x 12" High Speed Steel Extra Long Drill Bit, DWDDL Series
BOSCH BL2743 1-Piece 1/4 In. x 12 In. Extra Length Aircraft Black Oxide Drill Bit for Applications in Light-Gauge Metal, Wood, Plastic
Product DescriptionSpeed helix design for three times faster drilling than standard bits
Last 50 percent longer than high-speed steel
Easier drilling, reduced heat and extended drill bit life
Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
Product Details| Brand: | BOSCH |
|---|
| Model #: | BL2743 |
|---|
| Warranty: | No |
|---|
| Size: | 1 Count (Pack of 1) |
|---|
| Price: | $6.99 |
|---|
BOSCH BL2743 1-Piece 1/4 In. x 12 In. Extra Length Aircraft Black Oxide Drill Bit for Applications in Light-Gauge Metal, Wood, Plastic
NEOTEC 4" 8" 12" Earth Auger Drill Bits with Triple Drill Action Design + 3 X 24" Extension Bars for Gas Powered Post Fence Hole Digger - (4+8+12 Inch + 3 Extentions)
Product DescriptionProduct Details| Brand: | NEO-TEC |
|---|
| Model #: | NT-EA1 |
|---|
| Color: | 4"+8"+12" + 3 extension |
|---|
| Price: | $129.99 |
|---|
NEOTEC 4" 8" 12" Earth Auger Drill Bits with Triple Drill Action Design + 3 X 24" Extension Bars for Gas Powered Post Fence Hole Digger - (4+8+12 Inch + 3 Extentions)
Bosch HC4C2088-1/2 in. x 22 in. x 24 in. SDS-Plus® Bulldog™ Tough Rotary Hammer Bit
Product DescriptionFour-cutter carbide tipped head design – delivers up to 2X life in concrete with rebar (vs Hawera SDS-plus two-cutter concrete drill bit)
Four-cutter head – provides four cutting edges to hit rebar, to help prevent the bit from getting stuck
Centering tip – ideal for drilling anchoring holes to enhace the precision of hole placement
Four-flute design – standard flute design efficiently pulls dust away from the hole
Bosch-made carbide – manufactured by Bosch with quality materials promoting durability and longer life.
Diameter: 1/2 Inch, Usable length: 22 Inches, and Overall length: 24 Inches
Product Details| Brand: | Bosch |
|---|
| Model #: | HC4C2088 |
|---|
| Size: | 1/2" Diameter |
|---|
| Price: | $48.39 |
|---|
Bosch HC4C2088-1/2 in. x 22 in. x 24 in. SDS-Plus® Bulldog™ Tough Rotary Hammer Bit
M-D Building Products 56020 12 in. x 24 in. x .018 in. Galvanized Steel Sheet
Product DescriptionSteel
Use for general indoor or outdoor projects
12 in. W x 24 in. L x .018 in. D
Galvanized
Galvanized Finish
Rust and Corrosion Resistant
Product Details| Brand: | M-D Building Products |
|---|
| Model #: | MD Building - 56032 #2 |
|---|
| Warranty: | Warranty |
|---|
| Size: | 12in x 24 in |
|---|
| Color: | Galvanized |
|---|
| Dimensions: | 24 X 12 X 0.01 inches (Length X Width X Height) |
|---|
| Price: | $20.93 |
|---|
M-D Building Products 56020 12 in. x 24 in. x .018 in. Galvanized Steel Sheet
The Hillman Group 47717 12-24-Inch x 2-1/2-Inch Flat Head Self Drilling Screw with Wing and Phillips Drive
Product DescriptionUse in wood, fiberglass, and metal
Coarse threads and self-drilling point eliminate need for a pilot hole
Phillips drive for centering upon installation
1000 Hour Silver Ceramic finish for superior corrosion protection
Product Details| Brand: | Hillman |
|---|
| Model #: | 47717 |
|---|
| Size: | #12-24 x 2-1/2" |
|---|
| Color: | 270 Pieces |
|---|
| Dimensions: | 4.4 X 5.5 X 6.6 inches (Length X Width X Height) |
|---|
| Price: | $37.24 |
|---|
The Hillman Group 47717 12-24-Inch x 2-1/2-Inch Flat Head Self Drilling Screw with Wing and Phillips Drive
Duco USA-Made ABS Plastic Sheet 1/4 Inch Thick 12" x 24" - 1 Pack of Black Thermoplastic Panels - Textured, Heat Moldable ABS Board for DIY, Car Interiors, Crafts, and More
Product DescriptionPROUDLY MADE IN THE USA - Made from premium ABS material, these 1/4 inch ABS plastic sheets offer excellent impact strength, stiffness, and durability while remaining lightweight and versatile for industrial, commercial, and DIY use NOTE: Each ABS sheet is subject to a ⅛" cut tolerance
HEAT MOLDABLE & CHEMICAL RESISTANT - Easily thermoform or vacuum-form these 1/4 inch plastic panels for enclosures or curved components designed to resist acids, oils, and harsh chemicals while maintaining shape in high-temperature environments
VERSATILE TEXTURED SURFACE - Featuring a fine haircell texture on one side and a smooth finish on the other, this dual-sided 1/4 ABS plastic sheet is ideal for signage, displays, casing, model work, or functional parts needing grip
WIDE RANGE OF USES - These 1/4 inch plastic boards are perfect for dashboards, interior trim, speaker panels, electronics housing, cosplay, modeling, and structural backings making them essential for engineers, tinkerers, and creators
EASY TO CUT & CUSTOMIZE - Cut these 1/4 inch plastic sheets cleanly with a laser cutter, scroll saw, CNC, or rotary tool for accurate and safe results across custom parts, jigs, brackets, and templates with optional cut-to-size available
Product Details| Brand: | Duco Plastics & Supply |
|---|
| Model #: | ABS Sheet |
|---|
| Size: | 12" x 24" |
|---|
| Color: | Black |
|---|
| Dimensions: | 12 X 24 X 0.23622 inches (Length X Width X Height) |
|---|
| Price: | $26.35 |
|---|
Duco USA-Made ABS Plastic Sheet 1/4 Inch Thick 12" x 24" - 1 Pack of Black Thermoplastic Panels - Textured, Heat Moldable ABS Board for DIY, Car Interiors, Crafts, and More
Duco USA-Made Clear Cast Acrylic Sheet 1/8 Inch Thick 12" x 24" - 1 Pack of Transparent Plexiglass Sheet - Lightweight Acrylic Board for Window Replacements, Displays, Signs, and More
Product DescriptionMADE IN THE USA WITH OPTICAL CLARITY - Duco’s 1/8 inch thick acrylic sheets are proudly made in the USA and offer glass-like clarity, UV resistance, and long-term durability PLEASE NOTE sheets have a ±1/8 inch cut tolerance
DURABLE, LIGHTWEIGHT & SHATTER-RESISTANT - These 1/8 inch plexiglass sheets provide the same level of transparency as glass at half the weight and up to 10 times the strength. Ideal for high-impact displays, protective barriers, or architectural glazing
READY-TO-USE PANEL WITH PROTECTIVE FILM - Each 1/8 inch clear acrylic sheet measures 12" x 24" and is wrapped in a protective film to prevent scratches during transit, ensuring optical clarity
DIY-FRIENDLY FOR A WIDE RANGE OF PROJECTS - Great for laser cutting, CNC machining, or engraving, these plexiglass sheets 1/8 inch thick are ideal for signs, table protectors, window panes, crafts, displays, fish tank lids, and many other creative applications
EASY TO CUT OR DRILL - These 1/8 inch acrylic panels are easier to work with than glass and strong enough for load-bearing designs. In addition, they can be cleanly cut or drilled using a table saw, router, CNC, or laser without chipping or cracking
Product Details| Brand: | Duco Plastics & Supply |
|---|
| Model #: | 001 |
|---|
| Size: | 12" x 24" |
|---|
| Color: | Clear |
|---|
| Price: | $23.79 |
|---|
Duco USA-Made Clear Cast Acrylic Sheet 1/8 Inch Thick 12" x 24" - 1 Pack of Transparent Plexiglass Sheet - Lightweight Acrylic Board for Window Replacements, Displays, Signs, and More
WEN DPA2412T 24 in. x 12 in. Drill Press Table with an Adjustable Fence and Stop Block
POWERTEC 71539 14″ x 24″ Drill Press Table Set-Up Kit
WEN DPA2513 24-by-12-Inch Drill Press Table with an Adjustable Fence and Stop Block
AMYAMY Floor Drill Press / Rotary Tool Workstation Drill Press Work Station / Stand Table for Drill Workbench Repair ,drill Press Table ,Table Top Drill Press90° Rotating Fixed Frame
