Unibor EQ100 Diameter Annular Cutter Magnetic Drill, 7/16-Inch by 4-Inch

Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 2" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins

$238.80 @ Amazon.com

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

11 HSS core drill bit cutting tool kit with cutting diameter in inches: 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16", 2 inch cutting depth for each annular drill cutter

CNC-machined high precision drill bit cutter set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results

Compatible with various brands of magnetic drills including Alfra, BDS, Champion, Dewalt, Evolution, Fein, Euroboor, Hougen, Milwaukee, Ruko. Caution: if you want to use this 2 inch annular cutter on a drill press, you need an extra annular cutter arbor for the 2 inch bit. Arbor is NOT included in this pack

Sturdy good-looking case holding an assortment of 11 annular bits, 2 pilot pins and a bonus hex wrench

Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 2" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins

Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins

$190.80 @ Amazon.com

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

11 HSS core drill bit cutting tool assortment set with Outside Diameter in inches: 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16",1 inch cutting depth for each drill cutter

CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results

Compatible with various brands of magnetic drills including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor for the drill bit cutter. Arbor is not included in this pack

Sturdy good-looking case holding an assortment of 11 annular bits, 2 pilot pins and a bonus hex wrench

Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins

OSCARBIDE Annular Cutter 7/8 inch Cutting Diameter,2 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

$24.99 @ Amazon.com

Annular Cutter Size :7/8” Cutting Diameter,2"Cutting Depth, 3/4” Weldon Shank with 2 Flat,Pilot Piin Size: 6.34x102mm.

OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.

These HSS Slugger Bit ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.

OSCARBIDE annular Bit fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders

These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel

OSCARBIDE Annular Cutter 7/8 inch Cutting Diameter,2 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

OSCARBIDE Annular Cutter 3/4 inch Cutting Diameter,1 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

$19.99 @ Amazon.com

Annular Cutter Size :3/4”Cutting Diameter,1"Cutting Depth, 3/4” Weldon Shank with 2 Flat,Pilot Piin Size: 6.34x77mm.

OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.

These HSS Slugger Bit ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.

OSCARBIDE annular Bit fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders

These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel

OSCARBIDE Annular Cutter 3/4 inch Cutting Diameter,1 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

OSCARBIDE Annular Cutter Set 13pcs 3/4"Weldon Shank 1"Cutting Depth and 7/16 to 1-1/16 inch Cutting Diameter Mag Drill Bits for Magnetic Drill Press with 2 pcs Pilot Pins

$169.99 @ Amazon.com

Annular Cutter Kit 1" cutting depth,includes 11 pcs high speed steel annular cutters,Cutting Diameter(7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16") and 2 pilot pins.

OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.

These HSS Slugger Bits ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.

OSCARBIDE annular cutters sets 3/4" Weldon shank with 2 flats,fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders

These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel

OSCARBIDE Annular Cutter Set 13pcs 3/4"Weldon Shank 1"Cutting Depth and 7/16 to 1-1/16 inch Cutting Diameter Mag Drill Bits for Magnetic Drill Press with 2 pcs Pilot Pins

Annular Cutter Set 6 Pcs, Weldon Shank 3/4”, Cutting Depth 1”, Outside Diameter 1/2 to 1-1/16 Inch, Mag Drill Bits Kit for Magnetic Drill Press by S&F STEAD & FAST

$89.90 @ Amazon.com

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

6 HSS core drill bit cutting tool assortment set with Outside Diameter in inches: 1/2, 9/16, 11/16, 13/16, 15/16, 1-1/16,1 inch cutting depth for each drill cutter

CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results

Compatible with various brands of magnetic drills including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor for the drill bit cutter. Arbor is not included in this pack

Sturdy plastic case holding 6 annular bits, 1 pilot pin, 1 hex wrench

Annular Cutter Set 6 Pcs, Weldon Shank 3/4”, Cutting Depth 1”, Outside Diameter 1/2 to 1-1/16 Inch, Mag Drill Bits Kit for Magnetic Drill Press by S&F STEAD & FAST

OSCARBIDE 1/2"X2" HSS Annular Cutter 1/2 inch Cutting Diameter 2 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

$19.99 @ Amazon.com

Annular Cutter Size :1/2"Cutting Diameter,2"Cutting Depth, 3/4" Weldon Shank with 2 Flat,Pilot Piin Size: 6.34x102mm.

OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.

These HSS Slugger Bits ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.

OSCARBIDE annular Bit fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders

These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel

OSCARBIDE 1/2"X2" HSS Annular Cutter 1/2 inch Cutting Diameter 2 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

OSCARBIDE Annular Cutter 1 inch Cutting Diameter 2 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

$28.99 @ Amazon.com

Annular Cutter Size :1” Cutting Diameter,2"Cutting Depth, 3/4” Weldon Shank with 2 Flat,Pilot Piin Size: 6.34x102mm.

OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time

These HSS Slugger Bit ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.

OSCARBIDE annular Bit fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders

These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel

OSCARBIDE Annular Cutter 1 inch Cutting Diameter 2 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

OSCARBIDE 5/8"x2" HSS Annular Cutter 5/8 inch Cutting Diameter 2 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

$20.99 @ Amazon.com

Annular Cutter Size :5/8” Cutting Diameter,2 Cutting Depth, 3/4” Weldon Shank with 2 Flat,Pilot Piin Size: 6.34x102mm.

OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.

These HSS Slugger Bit ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.

OSCARBIDE annular Bit fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders

These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel

OSCARBIDE 5/8"x2" HSS Annular Cutter 5/8 inch Cutting Diameter 2 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

OSCARBIDE Annular Cutter Set 8 Pieces, 3/4"Weldon Shank,2"Cutting Depth,(9/16,11/16,13/16,15/16,1,1-1/16) inch Cutting Diameter,Mag Drill Bits for Magnetic Drill Press with 2pcs Pilot Pins

$99.99 @ Amazon.com

Annular Cutter Kit includes 6 pcs high speed steel annular cutters,2"Cutting Depth,Cutting Diameter(9/16", 11/16'', 13/16'', 15/16'', 1“,1-1/16) and 2pcs pilot pins.

OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.

These HSS Slugger Bits ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.

OSCARBIDE annular cutters sets 3/4" Weldon shank with 2 flats,fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders

These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel

OSCARBIDE Annular Cutter Set 8 Pieces, 3/4"Weldon Shank,2"Cutting Depth,(9/16,11/16,13/16,15/16,1,1-1/16) inch Cutting Diameter,Mag Drill Bits for Magnetic Drill Press with 2pcs Pilot Pins