Bolton 4 Axis CNC Milling Machine 118×394 Table Size

YIDOFENG CNC Router Milling Machine Rotary Table Rotational Axis 4th Axis A Axis, K12-100mm 4 jaw Chuck Dividing Head with 65mm Tailstock Reducing ratio 6:1 Fit for CNC Engraving Machine

$299.00 @ Amazon.com

【4TH AXIS】Model:K12-100mm; Chuck Type:K12-100mm 4 Jaw Chuck; Inner through hole diameter:22mm; Accessories:1 Set of Anti-claw and wrenches.

【NEMA23 STEPPER MOTOR】 2-phase ,3A ,Size:57x57x76mm, 4-lead wires(Red wire=A+;Green wire=A-;Yellow wire=B+;Blue wire=B- )

【MT2 TAILSTOCK】Total height: 115mm,Center height: 65mm, Stretch distance: 50mm,Reducing ratio:6:1 (belt deceleration mode) ,Angle: 0.3 ° / step.

【HIGH QUALITY】Stable 4 jaw chuck structure,fine workmanship,solid and practical jaw, rust proof coating process,excellent process to maximize service life.

【APPLICATION】 4th axis can be used for three-dimensional processing of cylinders, bends and circles. and 4th axis engraving machine can be used for engraving spirals, scars, bamboo joints, etc 3D pattern.

【AFTER SALES SERVICE】 If you get stuck, Contact us with any questions that arise. Our customer service team is always ready to assist with any questions you may have.

YIDOFENG CNC Router Milling Machine Rotary Table Rotational Axis 4th Axis A Axis, K12-100mm 4 jaw Chuck Dividing Head with 65mm Tailstock Reducing ratio 6:1 Fit for CNC Engraving Machine

CNC Milling Machine Rotational Axis CNC Router Rotary Table Rotary a axis 4th Axis 65mm 3 Jaw Chuck Dividing Head w/ Nema17 stepper motor w/ 54mm Tailstock Reducing ratio 4:1 for CNC Engraving Machine

$165.00 @ Amazon.com

♞【Rotation 4th Axis】Model:K11-65mm; Chuck Type:K01-63mm 3 Jaw Chuck;54 mm tailstock

♞【Feature】K11-65mm with three-jaw centering chuck: middle height: 54mm, total height: 85mm, angle: 0.3°/step, diameter of gear output shaft: 20 mm, reduction ratio: 4:1 (belt delay mode).

♞【Stepper motor】Nema17 2-phase stepper motor 45N.cm (64oz-in) 1.7A

♞【Advantages】Rust-proof dust cover, polishing and anode oxidation cover, rust protection coating. ,stable 3 jaw chuck structure,fine workmanship,solid and practical jaw, excellent process to maximize service life.

♞【Application】 The fourth axis can be used for three-dimensional processing of cylinders, bends and circles. The fourth axis engraving machine can be used for engraving spirals, scars, bamboo joints, etc.

CNC Milling Machine Rotational Axis CNC Router Rotary Table Rotary a axis 4th Axis 65mm 3 Jaw Chuck Dividing Head w/ Nema17 stepper motor w/ 54mm Tailstock Reducing ratio 4:1 for CNC Engraving Machine

Genmitsu CNC Machine PROVerXL 6050 Plus for Metal Wood Acrylic MDF Carving, GRBL Control, 3 Axis Milling CNC Router Machine, Hybrid Table, Working Area 600 x 500 x 115mm (23.62" x 19.69" x 4.53")

$1,699.00 @ Amazon.com

Now with a larger working area (23.62" x 19.69" x 4.53"), 300W spindle motor, redesigned all metal frame and motion-system. The PROVerXL 6050 Plus CNC Machine is ready for all your projects big or small. Faster and more accurate than ever before.

All new Dual HG-15 Linear Rails and Single Y-axis (T10 Lead Screw) structure is very rigid and greatly improves accuracy and overall strength with quieter operation than before.

Durable aluminum T-track grid extrusions that support the MDF Spoil Boards. Compatible with a wide variety of clamp sets and easily configurable with add-ons with easy maintenance and replacement of individual MDF spoil boards when needed.

The pre-assembled core system reduces setup time. There are just a few installation steps and wiring of electronics before you carve your projects. All NEMA23 stepper motors are equipped with manual jog wheels making it easy to adjust and position your spindle or stock material.

The PROVerXL 6050 Plus includes an extra 65mm spindle holder for future upgrades. Built to be configured for your next project, SainSmart offers a wide variety of accessories you can add, like a Offline Controller, or Dust Shoe (Sold Separately).

Genmitsu CNC Machine PROVerXL 6050 Plus for Metal Wood Acrylic MDF Carving, GRBL Control, 3 Axis Milling CNC Router Machine, Hybrid Table, Working Area 600 x 500 x 115mm (23.62" x 19.69" x 4.53")

CNCTOPBAOS K12-100mm CNC Router Milling Machine Rotational Axis 4th Axis A axis Rotary Table A axis 100mm 4 jaw chuck dividing head,MT2 65mm Tailstock Reducing ratio 6:1 for CNC Engraving Machine

$275.00 @ Amazon.com (Save 17%)

♞【Specifications of 4th Axis】Center height: 65mm(2.56"); Total height:; 115mm(4.5"); Angle: 0.3°/step ; Reduction ratio: 6:1; Base Material: Made of Aluminum alloy; Size: 210x168x115mm(8.3x6.6x4.5"); Weight: 7.9KG(17.4 LB); Inner through hole diameter/shaft hollow diameter is 22mm; Output shaft diameter:30mm

♞【Nema23 Stepper Motor】Phase: 2 Phase; Type: Hybrid; Step Angle: 1.8°; Current: 3.0A; Holding torque: 270oz-in/1.8Nm; Shat diameter: 8mm; 4 Lead Wires: "A+"=Red / "A-"=Green / "B+"=Yellow / "B-"=Blue; Motor Size: 57x57x76mm

♞【Specifications of MT2 Tailstock】Morse Taper 2 Live Center Movable MT2 Tailstock; Center Height: 65mm(2.56"); Expansion stroke: 45mm(1.77"); Stretch distance: 50mm(1.97"); Top tip: Activity type; With Axial locking wrench for tailstock; Exquisite workmanship,Durable,Stable performance,Sturdy and Wear-resistant; Weight: 2.5KG(5.5LB).

♞【100mm 4 Jaw Chuck】Chuck Type: K12-100 4-Jaw self-centering chuck; Diameter:100mm; Max input torque: 60N.m; Max Speed: 3500R/min; External jaw clamping range: 30-80mm(1.18-3.15").; Internal jaw clamping range: 2-30mm(0.08-1.18"); Internal jaw jamming range: 30-90mm(1.18-3.54"); With four Anti-claw and Wrench.

♞【Advantages】Rust proof coating process,stable 4 jaw chuck structure,fine workmanship,solid and practical jaw, excellent process to maximize service life.

♞【Application】 The fourth axis can be used for three-dimensional processing of cylinders, bends and circles. The fourth axis engraving machine can be used for engraving spirals, scars, bamboo joints, etc.

CNCTOPBAOS K12-100mm CNC Router Milling Machine Rotational Axis 4th Axis A axis Rotary Table A axis 100mm 4 jaw chuck dividing head,MT2 65mm Tailstock Reducing ratio 6:1 for CNC Engraving Machine

MUKLEI 12.2 Inches Milling Machine Worktable, Multifunction Mill Working Table, X-Y Axis Milling Machine for Mini Drill and Drill Bracket

$35.59 @ Amazon.com

HIGH QUALITY WORKTABLE - Made of premium aluminum alloy, the milling machine worktable is sturdy, heavy-duty, anti-rust, and corrosion-resistant. The table works very smoothly and precisely. It can move left and right, forward and backward without getting stuck.

ADJUSTABLE SCREW - There are 6 adjustable screws on the base of the multifunction worktable. 3 pieces on the X-axis and 3 on the Y-axis. There is a lock-nut on each screw, and you need to loosen the lock nut to adjust the screw. Slightly tighten the lock nut to remove any looseness in the cross-slide.

WHAT YOU GET - A package contains a piece of mill machine with a size of 12.2 x 3.5 x 3 inches. It is composed of several parts, including the adjustable scale, the travel screw, the fixed jaw, the cross-slide, and the base.

MULTI-PURPOSE MACHINE - The multifunction worktable is designed to work with bench drills. the worktable is widely used in garages, workshops, hardware stores, construction sites, and more. Whether you are a beginner or a professional, it will never let you down.

NICE AFTER-SALES - We guarantee to provide you with a trustworthy refund service within 30 days. Please feel free to contact us if you have any dissatisfaction or improvement problems about scissor jacks , and we will reply you as soon as possible within 24 hours.

MUKLEI 12.2 Inches Milling Machine Worktable, Multifunction Mill Working Table, X-Y Axis Milling Machine for Mini Drill and Drill Bracket

Genmitsu CNC 3018-PRO Router Kit GRBL Control 3 Axis Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine, XYZ Working Area 300x180x45mm

$190.00 @ Amazon.com (Save 25%)

New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018; All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy; Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, etc

Upgraded Power Adapter: UL Approved and out-of-the-box support for the drop in 20,000rpm Spindle, no need to modify G-code to ramp up to full speed

Controller Software: The Genmitsu 3018-PRO uses Grbl, a high-performance open-source software for controlling movement, and runs on Arduino; Includes CARVECO Maker CAM Design Software and CANDLE for controlling your machine and running your GCODE design files

Optional Upgraded Parts: Super Size your 3018 CNC to a 3040 by getting a Genmitsu 3040 Y-Axis Extension Kit; The 3040 Aluminum Spoilboard and 3040 MDF Spoilboard for this extension kit are also available to buy

Note: Assembly Instructions and User Guide are provided, please find at the Product Guides and Documents Section below and get everything you might need; If you get stuck, check out the SainSmart Resource Center (see at User Guide) or contact us with any questions that arise

Genmitsu CNC 3018-PRO Router Kit GRBL Control 3 Axis Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine, XYZ Working Area 300x180x45mm

Mophorn Milling Working Table 17.7 X 6.7 Inch, Compound Milling Machine Work Table 2 Axis 4 Ways Move, Multifunction Milling Working Table Heavy-duty Structure,for Milling and Drilling Machine

$110.99 @ Amazon.com (Save 18%)

【PREMIUM QUALITY STRUCTURE】- Built by heavy-duty cast iron material, which is anti-corrosion and rust resistance, angle milling table can withstand the tough environment and designed for long service time.

【HIGHLY POLISHING & STIFFNESS】- The compound slide table, with great hardness and stiffness, is high ground and not easy deformation. Three precise T-slots can meet different force requirements.

【2 AXIS 4 WAYS MOVE】- Handles with trapezoidal thread spindles is easy to adjust the directions. X-axis travel: 210 mm, Y-axis travel: 110 mm. With a precise scale on it, you can adjust the optimal working position as you need.

【TIGHTNESS ADJUSTMENT】- Equipped with several quality bolts and nuts, you can easily adjust the tightness of this cross slide table. Convenient for your use.

【WIDE APPLICATION AREA】- This milling working cross table machine is great for mounting on drilling machines for precise positioning. It can be used for most types of milling and drilling, ideal for all drill stands, drilling, and milling machines.

Mophorn Milling Working Table 17.7 X 6.7 Inch, Compound Milling Machine Work Table 2 Axis 4 Ways Move, Multifunction Milling Working Table Heavy-duty Structure,for Milling and Drilling Machine

FoxAlien Masuter Pro CNC Router Machine, Upgraded 3-Axis Engraving All-Metal Milling Machine for Wood Acrylic MDF Nylon Carving Cutting

$649.00 @ Amazon.com (Save 7%)

Structure Upgrade: Masuter Pro is an All-Aluminum CNC router machine. The Z-axis uses Linear Rail instead of rods and T8 lead screw, this greatly improves the stability and accuracy.

Upgraded Controller Box: Compact controller box desgin. The emergency stop button and home button are more easily and more convenient to access. The control box is also dust-proof for easy maintenance.

Compatibility Upgrade: Masuter Pro includes 2 spindle clamps: 52mm & 65mm. The 52mm clamp can accommodate the 60W spindle, 300W spindle and the FoxAlien 20W/40W modules. The 65mm clamp is for customized upgrade, such as 65mm router, 1.5KW spindle, etc. It also supports the 69mm spindle clamp, please buy separately.

Assembly Upgrade: Main parts are pre-assembled, and the part of the wires are pre-wired to the controller box. A detailed assembly guide is included. We provide step by step assembly manual.It takes only 10-15 minutes to fully assemble.

Large Engraving Area: The active working area is 15.75” x 15.75” x 2.36” (400 x 400 x 60mm). It is large enough for daily woodworking. It supports extension kit to enlarge the working area. It supports entension kit.

FoxAlien Masuter Pro CNC Router Machine, Upgraded 3-Axis Engraving All-Metal Milling Machine for Wood Acrylic MDF Nylon Carving Cutting

VEVOR CNC Router Machine, 300W, 3 Axis GRBL Control Wood Engraving Carving Milling Machine Kit, 400 x 400 x 75 mm / 15.7 x 15.7 x 2.95 in Working Area 12000 RPM for Wood Acrylic MDF PVC Plastic Foam

$349.99 @ Amazon.com (Save 22%)

Large Engraving Area: This CNC engraving machine features an effective engraving area of 15.74 x 15.7 x 2.95 in / 400 x 400 x 75 mm, larger than most of the engraving machines in the same class. It can be used with a trimmer to help you achieve more artistic creativity.

2.4'' Offline Controller: The CNC router machine is equipped with a 2.4-inch touchscreen offline controller that can work offline without connecting to a computer. The knob is available to help you operate the spindle motor more easily and accurately.

Aluminum Alloy Construction: The CNC wood router is made of industrial-grade aluminum alloy with surface oxidation treatment, which is light in weight, strong in strength, high in stability, shock-absorbing, and anti-deformation, which is conducive to improving the engraving precision.

Installation Made Easy: More than 70% of the parts of the CNC wood machine have been pre-assembled, so you only need to combine the three main parts of the offline controller, gantry frame, and base together and then plug in the power cord to use.

Engrave Various Materials: The CNC router engraver machine is capable of cutting, drilling, and engraving various soft, medium, and hard materials such as bamboo, wood, leather, plastic, foam, vinyl, etc., which helps you to achieve more engraving works of various types of materials and complicated patterns.

Notice: This product is not out of the box products, you need to understand the knowledge of CNC programming, the corresponding programming software need to pay extra to buy, this product does not provide programming software. We only provide test boards and corresponding test programmes. Carving material with too high hardness, too fast and too deep may lead to deviation from the trajectory, stopping in the middle, overheating of the motor and so on.

VEVOR CNC Router Machine, 300W, 3 Axis GRBL Control Wood Engraving Carving Milling Machine Kit, 400 x 400 x 75 mm / 15.7 x 15.7 x 2.95 in Working Area 12000 RPM for Wood Acrylic MDF PVC Plastic Foam

LUNYEE 3018 PRO MAX CNC Machine 500W All-Metal CNC Router Machine 3 Axis Limit Switches & Emergency-Stop with GRBL Offline Control for Cutting Wood Acrylic MDF Plastic, Working Area: 300 x 180 x 80mm

$349.00 @ Amazon.com (Save 8%)

500W Spindle & High Speed CNC Router Machine: The 500w Spindle is a Robust and Versatile Component Design. Its High-power Output Enables It to Deliver Consistent Performance, Even When Cutting Through Dense Materials Like Aluminum and Copper. This Powerful Spindle Ensures That Your Machine can Tackle Even The Most Demanding Projects While Maintaining Precision And Efficiency. The Maximum Movement Speed can Reach 5000mm/Min. The Spindle Speed Range is 0-12000RPM/Min.

3018 Pro Max All Metal Structure: All-metal Construction, Have Durability, Stability, and Reliability. By Using Reinforced Aluminum Profiles, The Machine Frame can Withstand Heavy Loads and Resist Wear And Tear Over Time. Furthermore, No Plastic Parts (Except For Electrical Components) Ensures That The Frame Maintains Its Structural Integrity Even in Harsh Operating Conditions.

Extra Long Z-Axis Travel: The New Design Makes This Machine Have The Longest Z-axis Stroke Among (80mm) The Standard Models on The Market.additionally, Our Machine Frame Incorporates a 12mm Optical Axis, Which Provides Precise Linear Motion and Accurate Positioning. This Feature is Crucial For Maintaining The Performance and Efficiency of Various Machinery and Automated Systems.We Provide Dedicated Upgrade Kit for 12mm, Please Contact us if Necessary(Upgrade Kit is Sold Separately).

3018 CNC Unparalleled Security: The 3018 CNC Machine Boasts a Robust Safety System with 6 Limit Switches and an Emergency Stop Button, Ensuring Optimal User Safety While Effectively Preventing Any Potential Abnormal Machine Conditions. Moreover, The Xyz Axis is Thoughtfully Outfitted with Manual Handwheels, Enabling Seamless and Accurate Positioning of The Machine Origin, Thereby Enhancing Overall Operational Efficiency and Facilitating a Highly Convenient Working Process.

Two-in-One CNC Machine: The Ability to Switch Between Spindle and Laser Modes Allows Users to Perform a Wide Range of Tasks with a Single Machine, From Cutting and Engraving to Marking and Etching. Having Versatile Equipment That can Adapt to Different Tasks and Materials is Essential for Maximizing Productivity and Efficiency.

Auxiliary instructions: We provide Machine Installation and Wiring Videos. Please Watch Them on the Product Link Page. The Package Contains a 4G USB Flash Drive and the Relevant Software has been Pre-installed.

LUNYEE 3018 PRO MAX CNC Machine 500W All-Metal CNC Router Machine 3 Axis Limit Switches & Emergency-Stop with GRBL Offline Control for Cutting Wood Acrylic MDF Plastic, Working Area: 300 x 180 x 80mm