Woodpeckers Paolini Pocket Rule, Aluminum, 6 Inch, Woodworking Ruler with Sliding Stop, Vertical End Scale, Scribing Notch, Engraved Scales
$44.99
@ Amazon.comProduct Description6 INCH WOODWORKING RULE - You will receive a 6 inch, Paolini Pocket Rule from Woodpeckers and a single sliding stop. Material is red anodized aluminum. The rule is 1" wide and 1/8" thick.
LASER ENGRAVED & MARKING GAUGE - Scales are laser engraved on both sides of the rule in 1/16" & 1/32" graduations, and along with the vertical end scale on both sides. A fine notch in the end of the scale turns this tool into an instant marking gauge.
SLIDING STOP - The included stop slides along the rule with ease. Lock it in to make repetitive measurements on multiple boards. Take off the stop and insert into cut-out to keep rule upright. Use this feature to dial height of router bits, saw blade or dado stack.
PICK YOUR OPTION - Woodpeckers Paolini Pocket Rules come in 2 material choices (Aluminum or Stainless Steel) and 3 sizing options (Inch, Metric or Combo). All available individually or as a kit.
MADE IN USA - Like all Woodpeckers products, the Paolini Pocket Rules are proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland.
Product DetailsBrand: | Woodpeckers |
---|
Price: | $44.99 |
---|
Woodpeckers Paolini Pocket Rule, Aluminum, 6 Inch, Woodworking Ruler with Sliding Stop, Vertical End Scale, Scribing Notch, Engraved Scales
Woodpeckers Square, 6 & 12 Inch Set, Made in USA, Stainless Steel Woodworking Square Tool, Versatile Carpenter Square with Scribing Notches
$279.99
@ Amazon.comProduct DescriptionSPECS - You will receive a 6-inch & 12-inch precision stainless steel woodworking squares. Made in the USA.
BUILT WITH PRECISION - Precision-engineered one-piece core crafted with state-of-the-art CNC milling technology.
STRENGTH & ACCURACY - 1/16" thick blade heat treated and tempered for exceptional strength and stability
ACCURATE - Laser-engraved scales with ±.004" tolerance and precisely-spaced scribing notches for accurate marking. Promised accuracy within ±.0085° for the life of the tool, backed by Woodpeckers' commitment to quality
BETTER VISIBILTY - Non-glare bead blasted finish and laser-engraved markings for enhanced visibility and contrast.
Product DetailsBrand: | Woodpeckers |
---|
Color: | Chrome |
---|
Price: | $279.99 |
---|
Woodpeckers Square, 6 & 12 Inch Set, Made in USA, Stainless Steel Woodworking Square Tool, Versatile Carpenter Square with Scribing Notches
Woodpeckers Woodworking Squares, 12 Inch, Aluminum Carpenter Square with Case, USA Made Precision Woodworking Tools
$154.99
@ Amazon.comProduct DescriptionSPECS - You will receive a 12-inch precision woodworking square. Accurate to within 0.001 inch along the full length of the tool. Made in the USA.
BUILT WITH PRECISION - Our precision woodworking squares start the manufacturing process as a solid piece of very expensive, extremely stable, cast aluminum tool plate. The plate is then carefully machined in multiple, high RPM passes on our state-of-art CNC equipment. The result is a single-piece ruler and handle square. This manufacturing process insures accuracy to within .001 inch or less along the full length of the tool.
STRENGTH & ACCURACY - Once we have a perfect square, we add two pieces of precision-machined aluminum to form the cheeks of the handle. These cheeks are fitted to the handle with two stainless steel dowel pins that ensure bulletproof rigidity and perfect alignment when pressed into their precision-machined holes. This kind of strength and accuracy simply cannot be matched by squares made using separate ruler and handle parts or punched-out on a stamping press.
FEATURES GALORE - The inside edge of the of the square’s handle features a shoulder to allow it to lay flat on the work so you can accurately mark either edge of the rule. The thick base even makes it easy to stand the rule upright to check square on your table saw blade, jointer fence, band saw blade and other machinery setup operations.
MORE FEATURES - With the square standing upright, checking casework parts for square is an effortless, hands-free operation. We even mill a notch at the inside corner of the square so you can “zero-out” your layout line all the way to the edge of your work. Easy to read measurement scales are laser etched in 1/16th increments on both sides of the ruler. Comes in a wall-mountable case as well.
Product DetailsBrand: | Woodpeckers |
---|
Model #: | 1281R-W |
---|
Color: | With Case |
---|
Dimensions: | 14.5 X 10 X 1.75 Inches (Length X Width X Height) |
---|
Price: | $154.99 |
---|
Woodpeckers Woodworking Squares, 12 Inch, Aluminum Carpenter Square with Case, USA Made Precision Woodworking Tools
Woodpeckers T Square, 24 Inch, Precision Woodworking T-Square Ruler, Built-in Edge Support, Scribing & Shelf Pin Guides, Rack-It Mount, Made in USA
$179.99
@ Amazon.comProduct Description24 INCH T-SQUARE - The Woodpeckers 24 inch t square ruler is made out of machined aluminum that is perfectly fitted to a solid, billet handle. Includes Rack-It wall mount storage.
BUILT-IN SCRIBING GUIDE - The blade itself has precisely spaced 1mm holes drilled every 1/16”. Stick a pencil in the hole, slide it along your work piece and presto, a perfectly spaced line, accurately following the edge of your stock.
SUPERIOR STABILITY - The innovative beam design with support lips prevents tipping and rolling, providing a solid base for accurate marking.
MORE FEATURES - The t-square has laser engraved scales (accurate within 0.004"). Built in 1/4" holes on 1" centers ideal for laying out shelf pins. Beveled edges that put scale markings right down next to your stock.
MADE IN USA - Crafted with precision and pride in Strongsville, Ohio, each T-Square undergoes meticulous inspection to ensure superior quality and reliability. Backed by our commitment to excellence, these tools are built to last a lifetime.
Product DetailsBrand: | Woodpeckers |
---|
Model #: | TS-24-2 |
---|
Color: | Red |
---|
Dimensions: | 30 X 12 X 1.5 inches (Length X Width X Height) |
---|
Price: | $179.99 |
---|
Woodpeckers T Square, 24 Inch, Precision Woodworking T-Square Ruler, Built-in Edge Support, Scribing & Shelf Pin Guides, Rack-It Mount, Made in USA
Woodpeckers Precision Woodworking Tools SG-WP Saw Gauge and Alignment Tool
$117.99
@ Amazon.comProduct DescriptionPerfect for both rip fence and saw blade alignments
Automatically adjusts to the width of the miter slot
Includes new lockable, plastic case
Dial indicator has 1-ich of travel as well as a rotation counter, one thousandth of an inch graduations, and adjustable scale and bezel
Made in USA
Product DetailsBrand: | Woodpeckers |
---|
Model #: | SG-WP |
---|
Dimensions: | 10 X 8.5 X 3.5 inches (Length X Width X Height) |
---|
Price: | $117.99 |
---|
Woodpeckers Precision Woodworking Tools SG-WP Saw Gauge and Alignment Tool
Woodpeckers Hexscale Rule, 24 Inch / 600MM, 6-in-1 Woodworking Ruler with Stop, Inch, Metric & Centering Scales, R2L & L2R Measuring, Architect Style
$49.99
@ Amazon.comProduct DescriptionINCLUDES - 1 Rule [24 Inch / 600MM] and 1 Stop.
ALL THE SCALE OPTIONS IN ONE TOOL - The Woodpeckers Hexscale delivers Left-to-Right and Right-to-Left measuring, Centering, Inch and Metric Graduations, and Stops. All delivered in an architectural style scale.
RIGHT-TO-LEFT RULER - Occasionally, a measurement needs to start from the right side, instead of the left. A familiar example of this is your table saw, where most often you need to measure from the rip fence on the right to the edge of the blade.
CENTER FINDING RULER - Whether for hardware mounting or joinery, woodworkers often need the center of a board. A centering scale takes all the math out of the equation. Just adjust the rule so the same measurement lines up on both edges and the zero will be at the exact center of the material. You can then either mark center or lay out points the same distance either side of center.
INCH AND METRIC - All options mentioned above are on the HexScale in both inch and metric graduations. The scales are organized to help those of us trying to become fluent in metric. If you’re looking at a scale in inches, roll the HexScale one time and the equivalent metric scale will replace it.
Product DetailsBrand: | Woodpeckers |
---|
Price: | $49.99 |
---|
Woodpeckers Hexscale Rule, 24 Inch / 600MM, 6-in-1 Woodworking Ruler with Stop, Inch, Metric & Centering Scales, R2L & L2R Measuring, Architect Style
Woodpeckers Spline Jig
$174.99
@ Amazon.comProduct DescriptionWoodpeckers Spline Jig starts with two sections of our Super Track. The powder-coated steel legs hold the tracks square to each other at two different height settings. The wider setting allows your project to ride just barely above the machine table. It's perfect for projects as narrow as 1/2" and up to 16" wide. When your project exceeds 16", just move the tracks inward to the alternate position and now you can add splines to your long projects. The jig includes 4 molded flip stops to make it simple to keep your splines aligned.
UHMW glide strips line the bottoms and edges of the legs, reducing friction and protecting your machine's table and fence from scratches. Just position your fence to put the kerf where you want it, keep a little pressure against the fence and guide your project through the saw blade. There's no simpler way to add strength and stability to your joinery.
To jazz up your spline joints with either wider splines or dovetail splines, move to your router table. Now you can use straight bits to cut spline slots 1/4", 3/8", 1/2" or larger. Install a dovetail bit to give your projects the classic look of dovetails. Cut the matching spline stock in two passes using the same bit. For a bold look, make your splines from stock that contrasts with the box material. Or, be subtle and use the same species…then see how long it takes people to figure out they're not regular dovetails! Slots in the Super Track accept the head of a 1/4"-20 hex head bolt. You can use almost any brand or style of hold-down.
Like all Woodpeckers products, the Spline Jig is precisely machined and carefully inspected in our Strongsville, Ohio, facility just south of Cleveland.
Product DetailsBrand: | Woodpeckers |
---|
Model #: | SPLINE-23 |
---|
Price: | $174.99 |
---|
Woodpeckers Spline Jig
Woodpeckers Woodworking Rule, 24 Inch, L2R & Center Laser Engraved Scales, USA Made Precision Aluminum Woodworking Ruler with Beveled Edges
$49.99
@ Amazon.comProduct Description24 INCH WOODWORKING RULER - Woodpeckers 24 Inch Woodworking Rule is straighter, heavier, sits flatter, and is easier to handle than any other woodworking rule. Add to that an engraving tolerance of ±.004" total accumulated error and we’re talking about the finest rules you can put in your workshop.
LEFT-TO-RIGHT & CENTERING SCALE - This woodworking rule features two sets of laser engraved scales. One side has a standard L2R scale and the other side features a centering scale.
BEVELED EDGES - The woodworking ruler features a 30° beveled edge specifically designed to bring your scale down to your work, preventing parallax error.
ADD-ONS - The Woodworking Rules have 3 different optional add ons you can use. A Hook Stop to give you a physical reference at the end of the tool. A Rule Stop to make repetitive marks. A Protractor Head to turn your rule into a tsquare and protractor rule.
MADE IN USA - Like all Woodpeckers tools, the Precision Woodworking Rules are precisely machined and carefully inspected in our Strongsville, Ohio facility.
Product DetailsBrand: | Woodpeckers |
---|
Model #: | WWR24 |
---|
Color: | Red |
---|
Dimensions: | 24 X 1.5 X 0.5 inches (Length X Width X Height) |
---|
Price: | $49.99 |
---|
Woodpeckers Woodworking Rule, 24 Inch, L2R & Center Laser Engraved Scales, USA Made Precision Aluminum Woodworking Ruler with Beveled Edges
Woodpeckers Mini Square, Made in USA, Small Pocket Woodworking Square for Checking Edge of Carpenter Cutting Tools for Square
$35.99
@ Amazon.comProduct DescriptionPRECISION - Measuring at 1-1/8 inch by 2 inch inside dimension, the Woodpeckers Mini Square is designed for checking the edge of your cutting tools for square.
QUALITY - Machined from aluminum, this minisquare is lightweight and features a dark red anodized finish which makes it easy to detect any gaps.
CARPENTER TOOLS - Light weight, easy to grip and machined from aluminum so it won't chip your tools. Fits in your pocket or its own custom fitted tray.
MADE IN USA - This premium, precision woodworking tool is built in the USA.
LIFETIME WARRANTY - We cover our Precision Aluminum Squares by a Lifetime Guarantee to stay square to within a minimum of .001” or we'll replace it. If for any reason, your square isn't, simply return it to us for immediate repair or replacement.
Product DetailsBrand: | Woodpeckers |
---|
Model #: | MINISQUARE |
---|
Color: | Red |
---|
Dimensions: | 3.25 X 2.5 X 1 Inches (Length X Width X Height) |
---|
Price: | $35.99 |
---|
Woodpeckers Mini Square, Made in USA, Small Pocket Woodworking Square for Checking Edge of Carpenter Cutting Tools for Square
Woodpeckers Precision Carpenter Square, 6 Inch, American Made Aluminum Square for Both Construction & Fine Woodworking
$109.99
@ Amazon.comProduct DescriptionTHE DIFFERENCE - The Woodpeckers Precision Carpenter Square is CNC-machined from aircraft grade aluminum - not stamped or molded like others. This allows the square to stay accurate.
6 INCH CARPENTER SQUARE - Not only will you get quick 45 and 90-degree angle marking, this carpenter square features inch graduations adding another layer of usefulness for carpentry and woodworking tasks.
BEEFIER SHOULDER - The square features a precision-machined beefy shoulder, providing a solid footing for assembly checks and accurate marking of construction lumber
RED ANODIZED FINISH - The carpenter square is anodized in a bright "Woodpckers Red" to stand out and protect against wear and tear.
MADE IN USA - Like all Woodpeckers products, the Precision Carpenter Square is proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland.
Product DetailsBrand: | Woodpeckers |
---|
Model #: | CRPSQ6-INRD |
---|
Color: | Red |
---|
Dimensions: | 8.75 X 7.25 X 2.125 inches (Length X Width X Height) |
---|
Price: | $109.99 |
---|
Woodpeckers Precision Carpenter Square, 6 Inch, American Made Aluminum Square for Both Construction & Fine Woodworking