Unibor EQ100 Diameter Annular Cutter Magnetic Drill, 7/16-Inch by 4-Inch

S&F STEAD & FAST Annular Cutter, 7/8" Cutting Diameter x 1" Depth of Cut for Magnetic Drill Press, Mag Drill Bit with Pilot Pin

$34.99 @ Amazon.com

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

HSS annular drill bit with Outside Diameter 7/8 inch with 1 inch cutting depth

CNC-machined high precision drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results

IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.

Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.

Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.

S&F STEAD & FAST Annular Cutter, 7/8" Cutting Diameter x 1" Depth of Cut for Magnetic Drill Press, Mag Drill Bit with Pilot Pin

SALI Annular Cutter Diameter 7/8 Inch with Weldon Shank 3/4" (with 2 Flats) Cutting Depth 1" Mag Drill Bit for Magnetic Drill Press HSS Fully Ground Drill with One 1/4"*3" Pilot Pin

$20.99 @ Amazon.com

Size：Diameter 7/8”，cutting depth 1”，weldon shank 3/4”，pilot pin：1/4”*3”

Annular cutters made with super tough m129al high speed steel (hss) for durability, wear resistance, high efficiency and superior service life

Cnc-machined high precision annular drill bit set with 3/4 inch weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for better results

Compatible with various brands of magnetic drills including alfra, bds, dewalt, euroboor, hougen, ruko. Caution: If you want to use this annular cutter on a drill press, you need an extra annular cutter arbor for the drill bit cutter. Arbor is not included in this pack

Sturdy plastic case holding one annular cutter, one pilot pin

SALI Annular Cutter Diameter 7/8 Inch with Weldon Shank 3/4" (with 2 Flats) Cutting Depth 1" Mag Drill Bit for Magnetic Drill Press HSS Fully Ground Drill with One 1/4"*3" Pilot Pin

OSCARBIDE 7/8"x2"Annular Cutter 7/8 inch Cutting Diameter,2 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

$27.99 @ Amazon.com (Save 22%)

Annular Cutter Size :7/8” Cutting Diameter,2"Cutting Depth, 3/4” Weldon Shank with 2 Flat,Pilot Piin Size: 6.34x102mm.

OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.

These HSS Slugger Bit ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.

OSCARBIDE annular Bit fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders

These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel

OSCARBIDE 7/8"x2"Annular Cutter 7/8 inch Cutting Diameter,2 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

OSCARBIDE Annular Cutter Set 7 Pieces 3/4" Weldon Shank 1"Cutting Depth,1/2 to 1-1/16 inch Diameter,2 Flats Annular Cutters HSS Mag Drill Bits Kit for Magnetic Drill Press with 1 Pieces Pilot Pin

$85.99 @ Amazon.com

OSCARBIDE Annular Cutters will drill large holes up to ten times faster than regular annular bits,and the drill bit annular are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits

Ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.

OSCARBIDE HSS Annular Cutter Set 3/4" Weldon shank with 2 flats,fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders

These Annular cutters sets are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form

Annular Drill Bits Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel

OSCARBIDE Annular Cutter Set 7 Pieces 3/4" Weldon Shank 1"Cutting Depth,1/2 to 1-1/16 inch Diameter,2 Flats Annular Cutters HSS Mag Drill Bits Kit for Magnetic Drill Press with 1 Pieces Pilot Pin

OSCARBIDE 7/16"X2"HSS Annular Cutter 7/16 inch Cutting Diameter 2 Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

$22.99 @ Amazon.com

Annular Cutter Size :7/16”Cutting Diameter,2"Cutting Depth, 3/4"Weldon Shank with 2 Flat,Pilot Piin Size: 4.74x102mm.

OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.

These HSS Slugger Bit ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.

OSCARBIDE annular Bit fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders

These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel

OSCARBIDE 7/16"X2"HSS Annular Cutter 7/16 inch Cutting Diameter 2 Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

OSCARBIDE 7/16"x2"Annular Cutters 2 Piece,7/16 inch Cutting Diameter 2 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press

$37.99 @ Amazon.com

Annular Cutter Size :7/16”Cutting Diameter,2"Cutting Depth, 3/4"Weldon Shank with 2 Flat,Pilot Piin Size: 4.74x102mm.

OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.

These HSS Slugger Bit ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.

OSCARBIDE annular Bit fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders

These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel

OSCARBIDE 7/16"x2"Annular Cutters 2 Piece,7/16 inch Cutting Diameter 2 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press

OSCARBIDE 7/16"x1" Annular Cutter,7/16 inch Cutting Diameter,1 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

$19.99 @ Amazon.com (Save 23%)

Annular Cutter Size :7/16”Cutting Diameter,1"Cutting Depth, 3/4” Weldon Shank with 2 Flat,Pilot Piin Size: 6.34x77mm.

OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.

These HSS Slugger Bit ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.

OSCARBIDE annular Bit fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders.

These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel.

OSCARBIDE 7/16"x1" Annular Cutter,7/16 inch Cutting Diameter,1 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

S&F STEAD & FAST Annular Cutter Set, 2-pc, 7/8" Diameter x 1" Depth of Cut for Magnetic Drill Press

$67.98 @ Amazon.com

Mag drill bits made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

HSS annular drill bit x 2 pieces with Outside Diameter 7/8 inch with 1 inch Cutting Depth

CNC-machined high precision cutter drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use with mag drills and hold a firm steady pressure throughout the cut for best results with these annular cutters

Compatible with various brands of mag drill press including Alfra, BDS, Dewalt, Evolution, Fein, Euroboor, Hougen, Milwaukee, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is NOT included in this pack.

Sturdy plastic case x 2, each holding one annular cutter, one pilot pin

S&F STEAD & FAST Annular Cutter Set, 2-pc, 7/8" Diameter x 1" Depth of Cut for Magnetic Drill Press

OSCARBIDE 7/8"x1"Annular Cutter,7/8 inch Cutting Diameter,1 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

$19.99 @ Amazon.com

Annular Cutter Size :7/8” Cutting Diameter,1"Cutting Depth, 3/4” Weldon Shank with 2 Flat,Pilot Piin Size: 6.34x77mm.

OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.

These HSS Slugger Bit ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.

OSCARBIDE annular Bit fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders

These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel

OSCARBIDE 7/8"x1"Annular Cutter,7/8 inch Cutting Diameter,1 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece

Annular Cutter JESTUOUS 7/8 Inch Cutting Diameter 3/4 Weldon Shank 1 Cutting Depth with Pilot Pin Slugger Bits HSS Kit for Magnetic Drill Press,1 Piece

$18.99 @ Amazon.com

Includes 1 annular cutter and 1 pilot pin(6.34*77mm) with plastic case.

The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.

Annular cutter are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders.

Made of tough high speed steel material, with longer service life and high heat resistance.

Applicable materials include wood, various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc.

Annular Cutter JESTUOUS 7/8 Inch Cutting Diameter 3/4 Weldon Shank 1 Cutting Depth with Pilot Pin Slugger Bits HSS Kit for Magnetic Drill Press,1 Piece