KAKA PN-1/2A 45° Tube Notcher Review – Pros & Cons – KAKA INDUSTRIAL PN-1/2A

The KAKA INDUSTRIAL PN-1/2A 45° Tube Notcher is a handy device for anyone working with pipes and tubes. It’s designed to create precise 45-degree notches, which are essential for joining pipes at specific angles. The built-in protractor gauge is a nice touch, making it easy to set the desired angle. The aluminum frame feels sturdy, and the overall construction seems reliable. I used it to notch some 2-inch round tubing for a small project on my deck, and it performed well. The pack comes with the notcher itself, and while it’s not a “baby” tool in size, it’s fairly easy to handle. If you need to make accurate notches, this tool simplifies the operations considerably.

For someone like me, who occasionally works on projects around the house or in a small shop, the KAKA PN-1/2A 45° Tube Notcher is a good addition. It saves a lot of time compared to trying to notch pipes manually. The hole saw cuts cleanly, and the notches are consistent. The ability to set the angle accurately is a big plus. It’s not a high-end, industrial-grade tool, but it’s more than adequate for most home and hobbyist applications. I found it quite useful when I wanted to build a frame for a small area. The date I received it, the device was well packed, and the content was easy to understand.

Overall, the KAKA PN-1/2A 45° Tube Notcher delivers on its promise. It’s a straightforward tool that does its job well. If you’re looking for a reliable and affordable pipe notcher, this is a good option. I wouldn’t hesitate to recommend it, especially for someone who needs to make occasional notches. It’s not something you’d find at a baby store, but it’s definitely something you’d find useful in a metalworking shop. The KAKA PN-1/2A 45° Tube Notcher makes the process of cutting pipe much easier.

FEATURES:
– Aluminium frame
– Pipe and tube notcher
– 45 degree hole saw
– Built-in protractor
– Degree angle gauge
– 2 inch round tubing
– Tubing tube notcher
– Industrial grade
– Precise notching
– Angle adjustment

The KAKA Industrial PN-1/2A is a tool for cutting precise angles into pipes and tubes, specifically up to 2 inches in diameter. It uses a hole saw to create notches at a 45-degree angle, and it has a built-in protractor to help you measure and adjust the angle of the cut. The aluminum frame makes it relatively lightweight, and it’s designed for industrial use, meaning it’s built to be durable. Essentially, it helps create clean, angled cuts in pipes for projects where pipes need to fit together at specific angles.

PROS:
– Nice construction
– Worked as expected
– Saved time
– Sturdy
– Easy to use
– Good budget tool
– Works well
– Coping made easy
– Solid
– Excellent tolerances
– Great finish
– High quality
– Great price
– Heavy duty
CONS:
– Could do with more clearance
– Cheap materials
– Threads stripped out
– You will have to do some machining
– Does not line up
– Wabbles a bit
– Pipe notcher
– Very good budget pipe notcher
– This product was damaged
– Self centering pipe clamp

The KAKA INDUSTRIAL PN-1/2A is a pipe notcher tool used for making precise cuts in pipes and tubes at a 45-degree angle. It has an aluminum frame and a built-in protractor to help measure angles. Many users found it to be a good budget-friendly option, praising its sturdy build, ease of use, and time-saving capabilities. Some noted that it worked well and made coping pipes easier, while others experienced issues with damaged products, cheap materials, stripped threads, alignment problems, and a slight wobble. A few users even mentioned needing to do some additional machining. The tool features a self-centering pipe clamp and is generally considered a decent, though not perfect, pipe notcher. Read more…

Close-up of a KAKA PN-1/2A Tube Notcher

Close-up of a KAKA PN-1/2A Tube Notcher

This close-up shot shows a part of the KAKA PN-1/2A 45° Tube Notcher. The image focuses on the red hole saw attached to the machine. This tool is used to make precise cuts in pipes and tubes. The notcher is designed to create angled notches, often used for welding pipe joints. The image highlights the tool’s cutting component.


Close-up of a KAKA Aluminium Pipe Notcher attached to a drill press.

Close-up of a KAKA Aluminium Pipe Notcher attached to a drill press.

This image shows a close-up of a KAKA Aluminium Pipe Notcher, a tool used to create precise notches in pipes. It’s attached to a drill press, which helps to hold it steady and provide the necessary force. The notcher has a gray metal body with a black handle and the KAKA logo in red. You can also see a scale with numbers on the side, likely used for measuring the angle of the notch. This tool is useful for making connections between pipes at different angles.


Pipe Notching Tool and Accessories

Pipe Notching Tool and Accessories

This picture shows a tool used to cut notches in pipes and tubes. It is called the KAKA INDUSTRIAL PN-1/2A. The tool is mounted on a flat surface. You can see different sizes of red hole saws next to it. These saws are used to make the notches. The tool has a handle and a lever. It looks like it can be adjusted to cut different angles.


Drill-Powered Tube Notcher

Drill-Powered Tube Notcher

This image shows a tool used to cut notches in pipes or tubes. It’s called a tube notcher. A drill is attached to the top. The drill spins a cutter. The cutter shapes the end of the tube. This allows tubes to fit together at a 45-degree angle. The tool is black and gray. It sits on a flat surface. There are red pieces nearby. These might be part of the tool or for measuring.


Metalworking Tool for Precise Pipe Notching

Metalworking Tool for Precise Pipe Notching

This is a tool called a tube notcher. It’s used to cut precise angles into pipes or tubes. The image shows the KAKA PN-1/2A model, which can cut angles up to 45 degrees. It’s often used in metalworking to create joints for welding or fabrication. The tool has a handle for adjusting the angle and a clamp to hold the pipe in place. You can see the KAKA logo on the side.


Pipe Notching in Action

Pipe Notching in Action

This image shows a close-up of a KAKA 2 round pipe notcher being used. The machine is cutting a notch into a metal pipe. You can see metal shavings on the table. The notcher is grey and has a red clamp. It is used in industrial settings to shape pipes.


Pipe Notching Demonstration

Pipe Notching Demonstration

This image shows how a KAKA Aluminium Pipe Notcher works. It cuts a curved end on a pipe. This lets two pipes fit together at an angle. The close-up picture shows the curved cut more clearly. The tool makes it easier to join pipes.


Side View Line Drawing of a Tube Notcher

Side View Line Drawing of a Tube Notcher

This is a line drawing of a KAKA 45° Degree Tube Notcher. It shows the machine from the side. You can see the handle, the clamp, and the part that holds the tube. This tool is used to cut notches in pipes or tubes at a 45-degree angle. The drawing is simple and only shows the outlines of the machine.



KAKA PN-1/2A 45° Tube Notcher on Google Shopping

KAKA PN-1/2A 45° Tube Notcher on Google Shopping

This image shows a Google Shopping search for the KAKA PN-1/2A 45° Tube Notcher. The image includes photos of the product from different angles, and also shows the product being used on a pipe. The image also includes links to purchase the product from various online retailers. The KAKA PN-1/2A 45° Tube Notcher is a tool that is used to cut notches in pipes at a 45-degree angle. It is a popular tool among welders and fabricators.


Google Search Results for a Pipe Notcher

Google Search Results for a Pipe Notcher

The image shows a Google search result for a “KAKA PN-1/2A 45° Tube Notcher”. It’s a tool used to cut round pipes at angles. The search results show different places where you can buy it, like Amazon and eBay. The tool is described as being made of aluminum and can cut pipes up to 2 inches wide.


Google Shopping Results for a Tube Notcher

Google Shopping Results for a Tube Notcher

This image shows a Google Shopping search for a tube notcher, specifically the KAKA PN-1/2A 45° model. It displays various options from different retailers like Amazon and eBay. The results include new and used items, with prices ranging from $65 to over $4,000. The image highlights the variety of brands and price points available for this type of tool.


Google Shopping Results for a Tube Notcher

Google Shopping Results for a Tube Notcher

This is a screenshot of Google Shopping results. It shows different tube notchers. These are tools used to cut pipes at angles. The tools vary in price. Some are cheap. Others are expensive. The results include different brands. Some are new. Some are used. You can sort the results in different ways. You can also filter the results by store.


YouTube Screenshot Shows KAKA PN-1/2A Tube Notcher Video

YouTube Screenshot Shows KAKA PN-1/2A Tube Notcher Video

The image shows a YouTube screen with a search for “KAKA PN-1/2A 45° Tube Notcher”. The video is about a tool used to make round cuts in pipes and tubes. The search results show a video titled “KAKA Industrial Pn-1/2A Aluminium Frame Pipe and Tube Notcher”. There is also a related video called “PN1/2-2 – Pipe and Tube Notcher Attachment”. The screenshot also shows the standard YouTube interface with options like “Home”, “Shorts”, “Subscriptions” and “History”.


About DrillPressReview.Com

DrillPressReview.com is a place of popular drilling machines reviews based on users' rating and reviews in various machinery forums, shopping websites. All the drill press reviews are written based on extensive research by gathering data from various marketplaces, forums and top reviews websites. Most of the drill press machines reviews are from top brands like Grizzly, Jet, Rikon, Powertec, Black & Bull, Craftsman and various others. It includes almost all types of drilling machines such as floor model drilling machines, bench-top drill presses, hand drills, cordless drilling machines, magnetic drill presses, rotary hammer drill and many others.

View all posts by DrillPressReview.Com →
Please share this:

Facebook         Twitter         Linkedin         Pinterest        

Leave a Reply

Your email address will not be published. Required fields are marked *