3/4-horsepower pneumatic motor; automatic air clamping
90-120 PSI recommended; minimum compressor capacity of 5.3 cfm at 90 PSI
Manufacturer’s limited 30-day warranty
Product Description The semi-automatic FOREMAN features an electric drill motor and an adjustable clamping cylinder. To operate, simply position your material to be drilled and pull the lever forward. This motion activates the 3/4 hp drill motor and throws the clamping cylinder. Finish the drill stroke by continuing to pull on the lever and then return the lever to the home position.Amazon.com Product Description The Kreg Foreman 3/4-Horsepower Semi-Automatic Pneumatic Pocket Hole Machine features a pneumatic drill motor and an automatically adjusting air clamping cylinder. To operate, simply position your material to be drilled and pull the lever forward. This motion supplies air to the clamping cylinder that automatically adjusts to your material thickness as well as activates the 3/4-horsepower drill motor. Finish the drill stroke by continuing to pull on the lever and then return the lever to the home position to cut the air supply. The machine operates at 90-120 PSI , needs a minimum compressor capacity of 5.3 CFM at 90 PSI , and can accommodate a 1/2-inch-to-1-1/2-inch material capacity. This model features new improvements over the DB50 model that include the addition of an oiler, top catch release, and the fence can now be adjusted from the top instead of under the machine. The machine comes backed with a 30-day manufacturer’s limited warranty.
Heat treated gears are helical-cut for quiet performance
Limited warranty, 30-day no-risk trial
Product Description 1610-1 Model Code: AC (part# 1610-1) This item features: -Rear mounted assist spade handle. -Long switch and pipe handle for added control. -For drilling and reaming large holes. -Hi-tech electronic switching and speed control components. -Current fluctuation reduces speed fluctuation when tool is under load. -Dial speed control, adjust with thumb wheel. -Soft-start reduces initial start-up torque. -Line voltage compensation. -Rapidly reaches full speed. -Molly chrome alloy gears. -Quik-Lok cord, for quick detachment from tool. -Chuck Size: 1/2 in. -Chuck Type: Keyed. -Voltage: 120.00 V. -Amps: 7.00 A. -Cutting Cap.: 1/2 in (steel) [Max]. -Spindle Thread: 5/8 in – 16. -Length: 12 1/4 in. -Handle Type: Back D-Handle/Centered Pistol Grip/Top Rod. -Type: Straight Drill. -Wt.: 9 1/2 lb. -Price is for 1 Each. Testing and approvals: -Complies with OSHA and UL requirements. Model CodeModel Description AAVoltage Type:AC/DC, Speed:450 rpm, Gear Reduction:Triple, Control Type:On/Off ABVoltage Type:AC, Speed:115 rpm [Min], 450 rpm [Max], Gear Reduction:Triple, Cord Length:8 ft, Control Type:Electronic Variable Adjustable ACVoltage Type:AC, Speed:650 rpm, Gear Reduction:Double, Control Type:On/Off ADVoltage Type:AC, Speed:900 rpm, Gear Reduction:Double, Control Type:On/Off
Click here to see price: www.micromark.com Accurate Tapping Made Easy Our Tapping Fixture holds taps perfectly square to the base so threads are cut straight every time. The smooth turning spindle and large knob provide the ‘feel’ of hand tapping needed to minimize breakage, and the cast iron base assures stability for extra control. Precision chuck holds taps with shanks 1/32 inch to 1/4 inch diameter. Clearance under chuck: adjustable up to 5-1/2 inches. Distance from center of chuck to front of column: 4-3/4 inches. Base includes 5/16 inch T-slots for mounting vises (see #82546 Quick-Jaw Vise, sold separately) and clamps. Tapping fixture can also be used for hand-powered drilling and reaming, and is the perfect drill press for plastic.
A two inch drilled hole process through 3/4″ steel. The AutoDrill 5100 series unit strokes down quickly, takes a nice controlled cut through the plate, then retracts back and ejects the “plug” created by the annular cutter. The annular cutter is simply a fancy hole saw for this type of process. We tried the “non-fancy” way of manually pecking to break the chip. As you can see, it didn’t work to well. AutoDrill *does* offer automatic peck cycles as well as PLC controllable drills with proximity sensors for a much better way of performing this process. However, chip issues may still exist depending on the product being drilled, the size of the hole cutter, etc. Please contact AutoDrill with any questions or for a quotation. 01.908.542.0244 800-871-5022 www.Drill-N-Tap.com http www.AutoDrill.com http www.Drilling-Heads.com http www.Drill-Unit.com http MultiDrill-Heads.com www.MultiSpindle-Drill-Heads.com http Production-Tapping-Equipment.com drill head multi drill press attachment multi drill dual drill automatic drill
A two inch drilled hole process through 3/4″ steel. The AutoDrill 5100 series unit strokes down quickly, takes a nice controlled cut through the plate, then retracts back and ejects the “plug” created by the annular cutter. The annular cutter is simply a fancy hole saw for this type of process. Please contact AutoDrill with any questions or for a quotation. 01.908.542.0244 800-871-5022 www.Drill-N-Tap.com http www.AutoDrill.com http www.Drilling-Heads.com http www.Drill-Unit.com http MultiDrill-Heads.com www.MultiSpindle-Drill-Heads.com http Production-Tapping-Equipment.com drill head multi drill press attachment multi drill dual drill automatic drill
