WEN Cross Vise Review

Yost Vises LV-4 Homeowner's Vise | 4.5 Inch Jaw Width with a 3 Inch Jaw Opening Home Vise | Secure Grip with Swivel Base | Blue

$29.99 @ Amazon.com (Save 23%)

HOME VISE: Is the perfect tool for your home workshop. Made from heavy duty 30,000 PSI Gray Iron castings, 3x stronger than cast iron vises.

TECHNICAL SPECS: Jaw Width: 4.5" x Jaw Opening: 3" x Throat Depth: 2.6" x Pipe Capacity: Min 0.6” D x Max 1.85". Mounting hardware is not included.

SWIVEL BASE: Vise head rotates 240° and equipped with a large 3.5" x 2.7" (8.9CM X 6.9CM) anvil work surface.

HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item.

YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee.

Yost Vises LV-4 Homeowner's Vise | 4.5 Inch Jaw Width with a 3 Inch Jaw Opening Home Vise | Secure Grip with Swivel Base | Blue

MYTEC Home Vise Clamp-On Vise，2.5"

$22.97 @ Amazon.com

HOME VISE: Net weight 3.31 lbs, Maximum width of jaw opening 2.5 inch, Jaw width 2.0 inch;

EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove;

PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end);

WIDE RANGE OF USES: This vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work;

TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution.

MYTEC Home Vise Clamp-On Vise，2.5"

Nuovoware Table Vise 3 Inch, 360° Swivel Base Universal Home Vise Portable Bench Clamp, Clamp-on Vise Bench Clamps Fixed Tool for Woodworking, Metalworking, Cutting Conduit, Drilling, Sawing, Blue

$25.99 @ Amazon.com

Universal Table Vise: With jaw width of 2.75 inch / 70 mm, the maximum opening of this jaw is up to 3 inch / 77.5 mm, which makes this bench clamp can fit most workbench and tables.

360-Degree Swivel Base: Designed with 360 degree rotate swivel base, this bench clamp is suitable for a wide range of clamping angles. Smooth guide rail makes the screw and handle function smoothly and effortlessly.

High-quality Material: The table vise is made of high-grade cast iron, chrome-plated spindle and nut material, and the jaw adopts quenching and re-fire technology to increase its hardness and strength, which is durable for long-term use and reliable to grip.

Easy Installation: Lengthened throat design ( throat capacity: up to 2.5 inch ) is easy to install that it can easily clamp on the edge of all kinds of desktops, effortless and time-saving, convenient to use.

Wide Application: Ideal for home, workshop, educational institution, and professional use, providing clamping for light applications, such as cutting conduit, drilling, gluing, woodworking, metalworking, sanding or planing, sawing and so on.

Nuovoware Table Vise 3 Inch, 360° Swivel Base Universal Home Vise Portable Bench Clamp, Clamp-on Vise Bench Clamps Fixed Tool for Woodworking, Metalworking, Cutting Conduit, Drilling, Sawing, Blue

Nakkaa 5" Bench Vise Ductile Cast Iron Bench Vise with 360° Flexible Swivel Locking Base Heavy Duty Home Work 5 Inch Bench Vice

$39.89 @ Amazon.com

Heavy Duty Casting: Made of high strength ductile iron and chrome-plated spindle and nuts, durable for long-term use and reliable to grip. The jaw adopts quenching and re-fire technology to increase its hardness and strength. Non-slip textured surface increases the grip force of jaw, which firmly holds the material, save time and effort when you work.

Universal 5" Bench Vise: Jaw width 5.0inch/12.7cm; Maximum opening of jaw is up to 3.94inch/10cm; Throat depth 3inch/7.6cm Clamping force 15KN; This bench vise fits most workbench, and kinds of thickness of tables.

Design: Replaceable microgroove tooth steel jaws grip workpieces without slipping, great for clamping and fixing.

Swivel Base: Built in 360 degree swivel base, 3 mounting holes anchor vise securely to a workbench, perfect for a wide range of clamping angles. It allows an ever greater degree of accuracy while you are working with a hand tool as there is no need to keep inserting and removing the piece you are working on.

Multipurpose: Mounting vise on the workbench, then you could do the work of woodworking, cutting conduit, drilling, gluing, metalworking, sanding or planing, sawing, etc. It can be used indoors or outdoors. Convenient and quick to install on or remove from kinds of workbench.

Nakkaa 5" Bench Vise Ductile Cast Iron Bench Vise with 360° Flexible Swivel Locking Base Heavy Duty Home Work 5 Inch Bench Vice

Wilton Multi-Purpose Bench Vise, 5-1/2" Jaw Width, 5" Max Jaw Opening, 2-3/4" Throat (Model 550P)

$174.79 @ Amazon.com

360-degree rotating head for clamping material at any angle

Indexed at 30-degree increments for quick set up

Replaceable steel pipe jaws

Large built-in anvil for forming and shaping materials

Replaceable hardened steel jaws with a serrated pattern ensure grip and a long life

V-jaws easily hold round stock vertically

Wilton Multi-Purpose Bench Vise, 5-1/2" Jaw Width, 5" Max Jaw Opening, 2-3/4" Throat (Model 550P)

Forward CR40A 4.5 Inch Bench Vise Heavy Duty Vice with Anvil and 210 Degrees Swivel Base (4 1/2")

$65.99 @ Amazon.com

Jaw Width: 114.3mm (4.5"), Jaw Opening: 127mm (5"), Throat Depth: 66mm (2.6"), Clamping Force: 6600 lbs (30kN)

Ductile Iron Bench Vise: Material upgraded, Forward CR40A vise is all made from sturdy heavy duty PSI 60,000 ductile iron, built for rugged use and extended life

More Clamping Options: CR40A bench vice is equipped with 2 sets of jaws: replaceable serrated flat jaws with slot jaws, built in pipe jaws(φ 1/2"- 3 1/2"), secure grip and smooth slide

More Versatile and Flexible: The 210-degree lockdown swivel base enable easy clamping of objects for your needs, making bench vice more efficient to work on complex workpiece

Multifunctional: The 4inch vise is popular for professional choose. Large anvil work surface. Easily mounted and solid lockdown

Forward CR40A 4.5 Inch Bench Vise Heavy Duty Vice with Anvil and 210 Degrees Swivel Base (4 1/2")

VEVOR Bench Vise, 4.5-inch Jaw Width 3.3-inch Jaw Opening, 240-Degree Swivel Locking Base Multipurpose Vise w/Anvil, Heavy Duty Cast Iron Workbench Vise w/Bolts & Nuts, for Drilling, Pipe Cutting

$29.99 @ Amazon.com (Save 12%)

Built to Last: The swivel vise is forged from sturdy cast iron, with a powder coating on the surface for a rust-proof finish. High-quality nuts and screws increase durability. Replaceable serrated jaw plates are made of premium carbon steel for superior grip. Go above and beyond and knock out all those tough projects!

Large Anvil Area: The strong design comes in handier when you take the 1.9" x 1.7"/ 4.8 x 4.3 cm anvil into consideration. Jaw Width: 4.5"/ 11.5 cm. Jaw Opening: 3.3"/ 8.5 cm. Throat Depth: 2.3"/ 5.9 cm. Creates large clamping force during your work.

Considerate Vise Kit: The updated accessories of this vise are now more thoughtful than ever! Comes with a set of nuts, screws and a manual for hassle-free installation. No need to purchase extra fittings. They can be easily installed on your bench upon arrival. Set up and get to work!

Adapt to Any Situation: The base can rotate an entire 240°. You can choose to tighten it in any direction you need to work at your fingertips. Allows an ever greater degree of accuracy as there is no need to keep inserting and removing the piece you are working on.

Multifunctional Sturdy Jaw: The multi-jaw fits both flat material and pipe or tube workpiece. Pipe Clamping Diameter: 0.6"-1.8" / 1.5-4.5 cm. It is perfect for small projects and is highly adept at securing tools for sharpening, grinding, cutting, tapping, etc.

VEVOR Bench Vise, 4.5-inch Jaw Width 3.3-inch Jaw Opening, 240-Degree Swivel Locking Base Multipurpose Vise w/Anvil, Heavy Duty Cast Iron Workbench Vise w/Bolts & Nuts, for Drilling, Pipe Cutting

Heavy Duty Bench Vise 4.5 Inch: Table Clamp Woodworking Vice Press Drill Tools Workbench Wood Metal Pipe Work Shop Block Swivel Slide Cross Welding Machine Kit Milling Grip Precision Magnetic Jaw Pad

$35.99 @ Amazon.com

MULTI-JAW DESIGN - Versatile 4.5" bench vise offers multi-jaw function, perfectly clamping both flat and round materials without causing surface damage. Ideal for woodworking, welding, and more.

DURABLE CONSTRUCTION - Industrial-strength, crafted from premium gray iron, this workbench tool ensures longevity even with heavy-duty use. A robust choice for any shop or home setup.

USER-FRIENDLY INSTALL - Whether a pro or novice, easily set up this bench clamp on your table or workbench. It offers a stable base for any drill, press, or milling tasks.

PRECISE SWIVEL - Featuring a 240-degree swivel locking base, this precision vise guarantees accurate work. With Throat Depth of 2-11/32 inches, Jaw Opening of 3-3/4 inches, and width of 4.5 inches; it's designed for optimal functionality.

MAGNETIC JAW PAD - This kit includes 4-inch thermoplastic polyurethane jaw covers with a special diamond pattern, ensuring grip and product safety. Magnetic design fits a variety of vises, providing ultimate protection during clamping.

Heavy Duty Bench Vise 4.5 Inch: Table Clamp Woodworking Vice Press Drill Tools Workbench Wood Metal Pipe Work Shop Block Swivel Slide Cross Welding Machine Kit Milling Grip Precision Magnetic Jaw Pad

Yost Vises 750-E Multi-Jaw Rotating Vise System | 2 in 1 Multipurpose Bench and Pipe Vise | Secure Grip with Swivel Base | Made with a Combination of Ductile Iron & Hardened Steel | Medium, Blue

$119.99 @ Amazon.com

MULTI-JAW VISE: The Yost Vises 750-E 5 Inch medium duty 60,000 PSI ductile iron cast vise has a dual jaw system equipped with a bench jaw to perfectly secure your wood or metal works as well as other manufacturing applications and a pipe jaw for your piping and tubing projects such as cutting or threading. Also has a large anvil work surface.

TECHNICAL SPECS: Jaw Width 5" (12.7 cm), Jaw Opening 5" (12.7 cm), Throat Depth 3" (7.62 cm), Min Pipe Capacity .375" (0.9525 cm), Max Pipe Capacity 2.5" (6.35 cm).

SWIVEL BASE AND VISE HEAD: 360 Degree rotatable swivel base with dual lockdowns. Head of vise rotates a full 360 degrees.

HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item.

YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee.

SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual.

Yost Vises 750-E Multi-Jaw Rotating Vise System | 2 in 1 Multipurpose Bench and Pipe Vise | Secure Grip with Swivel Base | Made with a Combination of Ductile Iron & Hardened Steel | Medium, Blue

Yost Vises COV-3 Clamp-On Vise | 3 Inch Jaw Width Portable Vise | Made from Gray Iron Casting | Blue

$23.84 @ Amazon.com (Save 40%)

PORTABLE VISE: The Yost Vises COV-3 3-inch Clamp-On Vise is made from 30,000 PSI Gray Iron Castings. It has a plated steel screw and handle and steel double guide rods. Capable of clamping up to 3/8 inch depth pipes.

TECHNICAL SPECS: Jaw Width 3" (7.62 cm), Jaw Opening 2.5" (6.35 cm), Throat Depth 1.625" (4.1275 cm).

HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item.

YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee.

SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual.

WARRANTY: Comes with a 1-year limited warranty and 90-day return.

Yost Vises COV-3 Clamp-On Vise | 3 Inch Jaw Width Portable Vise | Made from Gray Iron Casting | Blue