Bolton 4 Axis CNC Milling Machine 118×394 Table Size

CNC Milling Machine Rotational Axis CNC Router Rotary Table Rotary a axis 4th Axis 65mm 3 Jaw Chuck Dividing Head w/ Nema17 stepper motor w/ 54mm Tailstock Reducing ratio 4:1 for CNC Engraving Machine

$165.00 @ Amazon.com

♞【Rotation 4th Axis】Model:K11-65mm; Chuck Type:K01-63mm 3 Jaw Chuck;54 mm tailstock

♞【Feature】K11-65mm with three-jaw centering chuck: middle height: 54mm, total height: 85mm, angle: 0.3°/step, diameter of gear output shaft: 20 mm, reduction ratio: 4:1 (belt delay mode).

♞【Stepper motor】Nema17 2-phase stepper motor 45N.cm (64oz-in) 1.7A

♞【Advantages】Rust-proof dust cover, polishing and anode oxidation cover, rust protection coating. ,stable 3 jaw chuck structure,fine workmanship,solid and practical jaw, excellent process to maximize service life.

♞【Application】 The fourth axis can be used for three-dimensional processing of cylinders, bends and circles. The fourth axis engraving machine can be used for engraving spirals, scars, bamboo joints, etc.

CNC Milling Machine Rotational Axis CNC Router Rotary Table Rotary a axis 4th Axis 65mm 3 Jaw Chuck Dividing Head w/ Nema17 stepper motor w/ 54mm Tailstock Reducing ratio 4:1 for CNC Engraving Machine

CNCTOPBAOS K12-100mm CNC Router Milling Machine Rotational Axis 4th Axis A axis Rotary Table A axis 100mm 4 jaw chuck dividing head,MT2 65mm Tailstock Reducing ratio 6:1 for CNC Engraving Machine

$313.00 @ Amazon.com

♞【Rotation 4th Axis】Model:K12-100mm; Chuck Type:K12-100mm 4 Jaw Chuck;Inner through hole diameter/shaft hollow diameter is 22mm; with accessories:1 Set of Anti-claw and wrenches

♞【Stepper motor】Nema23 2-phase 3A stepper motor 57x57x76mm 4-lead wires: Red wire=A+;Green wire=A-;Yellow wire=B+;Blue wire=B- port.

♞【MT2 Tailstock】Center height: 65mm;Total height: 115mm 【Reducing ratio】6:1 (belt deceleration mode) ; Angle: 0.3 ° / step

♞【Advantages】Rust proof coating process,stable 4 jaw chuck structure,fine workmanship,solid and practical jaw, excellent process to maximize service life.

♞【Application】 The fourth axis can be used for three-dimensional processing of cylinders, bends and circles. The fourth axis engraving machine can be used for engraving spirals, scars, bamboo joints, etc.

CNCTOPBAOS K12-100mm CNC Router Milling Machine Rotational Axis 4th Axis A axis Rotary Table A axis 100mm 4 jaw chuck dividing head,MT2 65mm Tailstock Reducing ratio 6:1 for CNC Engraving Machine

Mophorn Milling Working Table 17.7 X 6.7 Inch, Compound Milling Machine Work Table 2 Axis 4 Ways Move, Multifunction Milling Working Table Heavy-duty Structure,for Milling and Drilling Machine

$117.29 @ Amazon.com (Save 13%)

Premium Quality Structure: Built by heavy-duty cast iron material, which is anti-corrosion and rust resistance, angle milling table can withstand the tough environment and designed for long service time.

Highly Polishing & Stiffness: The compound slide table, with great hardness and stiffness, is high ground and not easy deformation. Three precise T-slots can meet different force requirements.

2 Axis 4 Ways Move: Handles with trapezoidal thread spindles is easy to adjust the directions. X-axis travel: 210 mm, Y-axis travel: 110 mm. With a precise scale on it, you can adjust the optimal working position as you need.

Tightness Adjustment: Equipped with several quality bolts and nuts, you can easily adjust the tightness of this cross slide table. Convenient for your use.

Wide Application Area: This milling working cross table machine is great for mounting on drilling machines for precise positioning. It can be used for most types of milling and drilling, ideal for all drill stands, drilling, and milling machines.

Mophorn Milling Working Table 17.7 X 6.7 Inch, Compound Milling Machine Work Table 2 Axis 4 Ways Move, Multifunction Milling Working Table Heavy-duty Structure,for Milling and Drilling Machine

CNCTOPBAOS CNC Router 4th Axis Rotation A axis,Engraving Milling Machine Rotary Table 3 Jaw 100mm Chuck Dividing Head,Gapless Harmonic Reducer Gearbox Ratio 100:1 w/ 65mm Tailstock

$399.00 @ Amazon.com

【Chuck Type】 K11-100mm 3 Jaw Chuck Zero Backlash with Gapless harmonic gearbox reducer

【Stepper motor】 Nema23 2-phase 57x57x56mm stepper motor 3A 1.2Nm 4 Lead

【Center height】 65mm;Total height: 115mm

【Reducing ratio】100:1

【Accessories】Set of Anti-claw and wrenches

CNCTOPBAOS CNC Router 4th Axis Rotation A axis,Engraving Milling Machine Rotary Table 3 Jaw 100mm Chuck Dividing Head,Gapless Harmonic Reducer Gearbox Ratio 100:1 w/ 65mm Tailstock

MUKLEI 12.2 Inches Milling Machine Worktable, Multifunction Mill Working Table, X-Y Axis Milling Machine for Mini Drill and Drill Bracket

$35.59 @ Amazon.com

HIGH QUALITY WORKTABLE - Made of premium aluminum alloy, the milling machine worktable is sturdy, heavy-duty, anti-rust, and corrosion-resistant. The table works very smoothly and precisely. It can move left and right, forward and backward without getting stuck.

ADJUSTABLE SCREW - There are 6 adjustable screws on the base of the multifunction worktable. 3 pieces on the X-axis and 3 on the Y-axis. There is a lock-nut on each screw, and you need to loosen the lock nut to adjust the screw. Slightly tighten the lock nut to remove any looseness in the cross-slide.

WHAT YOU GET - A package contains a piece of mill machine with a size of 12.2 x 3.5 x 3 inches. It is composed of several parts, including the adjustable scale, the travel screw, the fixed jaw, the cross-slide, and the base.

MULTI-PURPOSE MACHINE - The multifunction worktable is designed to work with bench drills. the worktable is widely used in garages, workshops, hardware stores, construction sites, and more. Whether you are a beginner or a professional, it will never let you down.

NICE AFTER-SALES - We guarantee to provide you with a trustworthy refund service within 30 days. Please feel free to contact us if you have any dissatisfaction or improvement problems about scissor jacks , and we will reply you as soon as possible within 24 hours.

MUKLEI 12.2 Inches Milling Machine Worktable, Multifunction Mill Working Table, X-Y Axis Milling Machine for Mini Drill and Drill Bracket

500W CNC Router Machine, MYSWEETY 4540 CNC Wood Router 3 Axis Metal Milling Machine for Engraving Carving Wood Acrylic MDF PCB Plastic, Working Area: 430 * 390 * 90mm(16.9 * 15.4 * 3.5inch)

$549.99 @ Amazon.com

👍【500W Spindle & High Speed】 The upgraded 3-axis 4540 engraving machine is equipped with an 500W spindle for more power and higher efficiency, making it possible to cut stainless steel, aluminum and other metals. The maximum movement speed can reach 5000mm/min, the spindle speed range is 0-11000rpm/min

👍【Larger Working Area】 The cnc router machine has a larger engraving area, increased to 430*390*90 mm(16.9*15.4*3.5inch). The working table has precise scale lines, which is convenient for you to locate and measure the engraving material size

👍【Wide Application & Compatibility】 The CNC wood machine is compatible with GRBL software and supports systems such as Windows XP/7/8/10 and Mac OS. Suitable for engraving and carving stainless steel, wood, aluminum, brass, plexiglass, leather, PCB, MDF, acrylic, resin, nylon, carbon fiber, PCB, PVC, etc

👍【Easy to Assemble】 This CNC wood carving machine could be assembled in 15-30 minutes. The main components are already pre-assembled. Wires are clearly labeled for quick connection. The control board, power supply, emergency stop, and wires are integrated into a newly designed box for easy and safe operation. You just need several installation steps and wiring to start carving your projects

👍【Package Included】 Comes with everything you need. This engraving machine set included all parts to assemble 4540 cnc machine, integrated controller box, touchscreen cnc offline controller, Z-probe, CNC router bits, English manual, and more. We also provide a 1-year warranty and fantastic after-sales service, If any questions, please contact us as soon as possible

500W CNC Router Machine, MYSWEETY 4540 CNC Wood Router 3 Axis Metal Milling Machine for Engraving Carving Wood Acrylic MDF PCB Plastic, Working Area: 430 * 390 * 90mm(16.9 * 15.4 * 3.5inch)

CNC Milling Machine Rotational Axis 100 * 125mm Table size CNC Rotary Table 5 Axis Table Dividing Head 5th 4th Rotational Axis Power Milling Machines Accessesaries

$456.00 @ Amazon.com

[Specification] Color: Silver, Rack Material: Aluminum Alloy, Center height: 98mm, Table size: 100 x 125mm, Size: 440 x 150 x 160mm, Weight: 11kg.

[Application] This is a new CNC Rotary Table Axis which can hold various types of materials, and can be carved with wood, olive core, plastic and other soft materials.

[Features] High concentricity and high conversion rate. Precise positioning and stable control. Not easy to rust, long service life.

[Reduction Ratio] Fourth axis reduction ratio 8:1 (57 two phase 4 wire 3A stepper motor), Fifth axis reduction ratio 6:1 (57 two phase 4-wire 3A stepper motor).

[Service] If you have any questions, please feel free to contact us, we will provide you with satisfactory solutions in 24 hours.

CNC Milling Machine Rotational Axis 100 * 125mm Table size CNC Rotary Table 5 Axis Table Dividing Head 5th 4th Rotational Axis Power Milling Machines Accessesaries

US STOCK Ovsuqu CNC 6040 5 axis CNC Router Engraving Machine 2200W Spindle water cooling Ball Screw CNC Pillar Type CNC Wood Aluminum Copper Metal Milling Machine

$3,159.00 @ Amazon.com

Easy operating because: It can work with 3 axis / 4 axis / 5 axis, just as you like ! Independent high-speed micro computer intelligent controller. Independent drivers for each axis. Mach 3 software USB connection Upgraded with more stable structure than old type Built in frequencey converter and without controller box.

Ovsuqu Higher precision because: Cross slippery platform design rather than gantry design. Aluminum base sheet is heavy which can make sure less vibration when work. With auto-checking function. 1500/2200w water-cooled spindle. Ball screw Stainless Steel sink for bits cooling

CE approved. Video support. English manual available. Mach 3 software send with the machine as a U disk. Can engrave material which hardness below 45. From reliable & trustable profesional CNC Router manufacturer

Woodbox package, weight about 120KG, size will be 114*97*58CM, quite big and heavy.

ETA: US STOCK, 3-10 days to your door, NO custom fees.

US STOCK Ovsuqu CNC 6040 5 axis CNC Router Engraving Machine 2200W Spindle water cooling Ball Screw CNC Pillar Type CNC Wood Aluminum Copper Metal Milling Machine

Mophorn Milling Working Table 17.7 X 6.7 Inch, Compound Milling Machine Work Table 2 Axis 4 Ways Move & Happybuy Milling Vise 4 Inch,Bench Clamp Vise High Precision Clamping

$204.31 @ Amazon.com (Save 12%)

Product 1: Premium Quality Structure: Built by heavy-duty cast iron material, which is anti-corrosion and rust resistance, angle milling table can withstand the tough environment and designed for long service time.

Product 1: Highly Polishing & Stiffness: The compound slide table, with great hardness and stiffness, is high ground and not easy deformation. Three precise T-slots can meet different force requirements.

Product 1: 2 Axis 4 Ways Move: Handles with trapezoidal thread spindles is easy to adjust the directions. X-axis travel: 210 mm, Y-axis travel: 110 mm. With a precise scale on it, you can adjust the optimal working position as you need.

Product 1: Tightness Adjustment: Equipped with several quality bolts and nuts, you can easily adjust the tightness of this cross slide table. Convenient for your use.

Product 2: 【PREMIUM QUALITY STRUCTURE】- The whole bench clamp is made of high-quality iron material with high hardness and stiffness. Designed for long-term service time.

Product 2: 【POWERFUL CLAMPING FORCE】- After fine grinding treatment, the surface of the clamp is smooth and flat. Swiveling vise features with the perfectly aligned precision jaw. Maximum clamping force of 29 KN.

Mophorn Milling Working Table 17.7 X 6.7 Inch, Compound Milling Machine Work Table 2 Axis 4 Ways Move & Happybuy Milling Vise 4 Inch,Bench Clamp Vise High Precision Clamping

Z Axis Sliding Working Table DIY Milling Linear Motion for CNC Engraving Machine

$55.01 @ Amazon.com

This Z Axis Slider is made of high quality Stainless Steel material , very durable in use and not easy to rust.

up and down position adjustment.

M3 screws fixation, can also be fixed 755 motor seat.

This Z Axis Sliding Working Table can be mounted with pen, graver or other equipments.

Material: Stainless Steel

Z Axis Sliding Working Table DIY Milling Linear Motion for CNC Engraving Machine