This TEXALAN(R) drill press vise seems like a really useful tool for anyone who works with a drill press. It’s a heavy-duty clamp that helps you hold your work in place while you drill. Imagine you’re trying to drill a hole in a piece of wood. Without a vise, the wood might move around, and your hole might not end up where you want it. This vise solves that problem. It has two handles that let you move your work left and right, and also forward and backward. This is called an “X-Y compound” design. It makes it much easier to drill multiple holes in exactly the right spots without having to unclamp and reclamp your work over and over again. It feels very solid and well-built, which gives you confidence that it will hold your workpiece securely. “” This is important because if your work isn’t held tightly, the drill bit could cause it to vibrate or “chatter,” which can make your drilling less accurate and even a little dangerous.
The 6-inch size of this vise means it can hold pieces of work up to that width. That’s a pretty good size for most projects you might do at home or in a small workshop. Setting it up looks pretty straightforward; you simply mount it onto the table of your drill press. There are slots in the base of the vise that allow you to bolt it down securely. Having it bolted down is crucial for stability and safety. The handles turn smoothly, allowing for precise adjustments. You can really fine-tune the position of your workpiece. There are also stops that you can set. These stops help you repeat the same drilling position accurately, which is handy if you’re making multiple identical parts. “” It’s not like watching a movie on IMDb or playing in the yard, but for getting accurate drilling done, this tool seems like a big help. It definitely beats trying to hold things steady by hand!
Overall, this TEXALAN(R) drill press vise appears to be a reliable and well-designed piece of equipment. It’s not something you’d take to a resto or use to measure torque, but it serves its purpose well. It helps prevent movement and chatter, leading to cleaner and more accurate drilling. The ability to easily move your workpiece in two directions without unclamping is a significant advantage. The heavy-duty construction suggests it will last for a while. While I haven’t measured the exact perimeter of the vise or the units of force it can withstand, it feels strong and capable. “” If you’re serious about using your drill press for more than just simple tasks, investing in a vise like this seems like a smart move. It will likely make your work easier, safer, and more precise.
FEATURES:
– Heavy duty
– 6 inch size
– X-Y movement
– Compound vise
– 2 way slide
– Cross slide
– Vise clamp
– Machine vise
– Clamping workpiece
– For processing
This is a strong, 6-inch vise that can move in two directions (X and Y). It’s called a compound or cross slide vise. This tool is heavy-duty and made to clamp onto things you are working on. You can use it with a drill press or other machines to hold your work steady while you process it. It helps you move and precisely position the item you are working on.
– Cheaper alternative
– Exceeds drill press precision
– Gets the job done for the money
– Works fine with adjusting and lube
– Good result with a few hours work
– Can be made to work well
– Better than moving by hand
– Useful for drilling holes
– Crunchy, high resistance motion
– Jumpy, hard to position
– Rough, needed deburring
– Cross-threaded jamb nut
– Soft screw heads
– No mounting hardware included
– Clamping handle came out
– Not a precision tool
– Luck of the draw quality
– Needs cleaning and lube
This TEXALAN drill press vise is a cheaper option that can work for drilling holes, and it’s better than trying to move things by hand. However, it’s not a tool for very precise work. Some users found the movement to be rough and difficult to control, and the vise may need some cleaning, lubrication, and adjustments to work well. There’s also a chance of getting one with issues like loose parts or soft screws, and it doesn’t come with the hardware needed to attach it. Read more…
Heavy Duty X-Y Vise for Precise Work
This is a strong tool called an X-Y vise. It has two handles that let you move things forward and backward, and also side to side very accurately. This helps when you need to hold something still and work on it in a specific spot, like drilling a hole in exactly the right place. The TEXALAN 6″ Heavy Duty X-Y Vise is built to be tough for bigger and more careful jobs.
Heavy Duty Drill Press Vise for Precise Work
This is a Texalan heavy-duty cross slide vise. It’s a tool that helps hold things tightly when you’re using a drill press. The vise can move side to side and forward and backward. This makes it easy to drill holes exactly where you need them on a workpiece. It looks strong and well-built for tough jobs.
Drill Press Vise for Precise Work
This is a metal tool called a drill press vise. It has two handles that you can turn to move the top part left, right, forward, and backward. This helps you hold things very still and in the exact right spot when you are using a drill. It’s like a strong clamp that can also slide around.
TEXALAN Workpiece Clamp for Precise Adjustments
This image shows a TEXALAN 2-way workpiece clamp. It looks heavy-duty and is designed to hold objects firmly. The clamp has handles that can be turned to move the top part in two different directions. This allows for precise adjustments when working on a project, likely with a drill press or similar machine. It helps keep the workpiece steady while you work on it.
Adjustable Milling Vise for Precision Work
This is a milling vise. It’s a tool that holds workpieces securely. It has jaws that can be tightened or loosened using handles and screws. This vise is special because it can be adjusted in different directions. This helps in doing precise work with milling machines or drills. The black metal makes it strong and durable.
Close-up of a Texalan Drill Press Vise
This picture shows a Texalan X-Y drill press vise. It has jaws to hold objects firmly. The vise can move in two directions, left to right and forward and backward. This helps in precisely positioning the object for drilling. The handle is used to tighten the jaws and move the vise.
