Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins
Product DescriptionAnnular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
11 HSS core drill bit cutting tool assortment set with Outside Diameter in inches: 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16",1 inch cutting depth for each drill cutter
CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Size: | 3/4 inch shank |
|---|
| Dimensions: | 8.267716527 X 3.149606296 X 8.0708661335 inches (Length X Width X Height) |
|---|
| Price: | $194.80 ($12.99 / Count) |
|---|
Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins
S&F STEAD & FAST Annular Cutter Set 6 Pcs, Depth of Cut 2”, Cutting Diameter 7/16 to 1-1/16 Inch, Weldon Shank 3/4”, HSS Mag Drill Bits Kit for Magnetic Drill Press with Pilot Pin x 2
Product DescriptionAnnular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
6 HSS core drill bit cutting tool kit set with cutting diameter in inches: 7/16, 9/16, 11/16, 13/16, 15/16, 1-1/16, 2 inch cutting depth for each annular drill cutter
CNC-machined high precision drill bit cutter set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Model #: | ZXT-HAZ-016 |
|---|
| Size: | 3/4" shank 2" cutting depth |
|---|
| Color: | Silver |
|---|
| Price: | $123.80 |
|---|
S&F STEAD & FAST Annular Cutter Set 6 Pcs, Depth of Cut 2”, Cutting Diameter 7/16 to 1-1/16 Inch, Weldon Shank 3/4”, HSS Mag Drill Bits Kit for Magnetic Drill Press with Pilot Pin x 2
S&F STEAD & FAST Annular Cutter Set 13 Pcs, Cutting Depth 2" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins
Product DescriptionAnnular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
11 HSS core drill bit cutting tool kit with cutting diameter in inches: 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16", 2 inch cutting depth for each annular drill cutter
CNC-machined high precision drill bit cutter set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Size: | 3/4 inch shank |
|---|
| Price: | $241.80 |
|---|
S&F STEAD & FAST Annular Cutter Set 13 Pcs, Cutting Depth 2" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins
S&F STEAD & FAST Annular Cutter, 13/16" Cutting Diameter x 1" Depth of Cut for Magnetic Drill Press, Mag Drill Bits with Pilot Pin
Product DescriptionAnnular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
HSS annular drill bit with Outside Diameter 13/16 inch with 1 inch cutting depth
CNC-machined high precision drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Model #: | ZXT-HAZ-010 |
|---|
| Size: | 13/16" x 1" |
|---|
| Dimensions: | 2.44 X 0.81 X 2.44 inches (Length X Width X Height) |
|---|
| Price: | $33.99 |
|---|
S&F STEAD & FAST Annular Cutter, 13/16" Cutting Diameter x 1" Depth of Cut for Magnetic Drill Press, Mag Drill Bits with Pilot Pin
S&F STEAD & FAST Annular Cutter Set, 2-pc, 5/8" Diameter x 1" Depth of Cut for Magnetic Drill Press
Product DescriptionMag drill bits made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
HSS annular drill bit x 2 pieces with Outside Diameter 5/8 inch with 1 inch Cutting Depth
CNC-machined high precision cutter drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use with mag drills and hold a firm steady pressure throughout the cut for best results with these annular cutters
Compatible with various brands of mag drill press including Alfra, BDS, Dewalt, Evolution, Fein, Euroboor, Hougen, Milwaukee, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is NOT included in this pack.
Sturdy plastic case x 2, each holding one annular cutter, one pilot pin
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Model #: | 05060917981316 |
|---|
| Price: | $54.07 ($9.01 / Count) |
|---|
S&F STEAD & FAST Annular Cutter Set, 2-pc, 5/8" Diameter x 1" Depth of Cut for Magnetic Drill Press
S&F STEAD & FAST Carbide Annular Cutter 1" Cutting Diameter, 2" Depth of Cut, 3/4" Weldon Shank
Product DescriptionAnnular cutters made with tough and heat-treated alloy steel and imported high-performance ultra-high hardness (HRA 91-93) carbide tips to ensure high efficiency and superior service life
Carbide annular drill bit with outside diameter 1 inch and 2 inch cutting depth
CNC-machined high precision drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results.
Compatible with various brands of mag drill including Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, Ruko. CAUTION: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is not included in this pack but available in our Amazon store.
Design includes European tungsten carbide tips and product is engineered especially for cutting hard or corroded metals
Sturdy plastic case holding one annular cutter, one pilot pin
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Size: | 1 x 2" |
|---|
| Dimensions: | 3.6 X 1 X 1 inches (Length X Width X Height) |
|---|
| Price: | $53.99 |
|---|
S&F STEAD & FAST Carbide Annular Cutter 1" Cutting Diameter, 2" Depth of Cut, 3/4" Weldon Shank
S&F STEAD & FAST Annular Cutter Extension 4"/100mm for 3/4 Inch Weldon Shank, Annular Cutter Holder for Magnetic Drill Press, Weldon Shank Adapter
Product DescriptionMade with proprietary premium Chrome-Molybdenum alloy steel for enhanced toughness and hardness; long-service life and suitable for professional use.
Drill difficult to reach areas: weldon shank adapter extend cutter reach up to 4" or extend cutter reach over the side or through an exsisting hole.
CNC-machined high precision Weldon Shank Extension for use on mag drill press.
Suitable for all annular cutters with ¾ inch Weldon Shank.
What you will receive: annular cutter extension x 1; hex shank x 1, securely packed in plastic case for protection during transportation and long-term storage.
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Model #: | CT-AC-100-1 |
|---|
| Dimensions: | 51.18110231 X 15.74803148 X 15.74803148 inches (Length X Width X Height) |
|---|
| Price: | $38.99 |
|---|
S&F STEAD & FAST Annular Cutter Extension 4"/100mm for 3/4 Inch Weldon Shank, Annular Cutter Holder for Magnetic Drill Press, Weldon Shank Adapter
S&F STEAD & FAST Annular Cutter Arbor, Morse Taper MT3 to 3/4 Inch Weldon Shank, Annular Cutter Adapter Used on Drill Press for Annular Cutters
Product DescriptionQuality Materials: Annular Cutter Arbor made with proprietary premium chrome-molybdenum alloy steel for enhanced toughness and hardness; long-service life and suitable for professional use
Precision Machining: CNC-machined high precision arbor for use on drill press, milling machine or shop equipment with a Morse Taper intake No. 3; designed to control spindle runout
Superior Accessories: Matching high-grade accessories to complete the tool holder set: imported set screws, allen key and spring
Compatibility: Suitable for all annular cutters with ¾ inch Weldon Shank (MT3 to 3/4” Weldon Shank)
Packaging: Arbor tool securely packed in plastic case for protection during transportation and long-term storage
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Size: | MT3-Standard |
|---|
| Dimensions: | 6.8 X 1.95 X 1.95 Inches (Length X Width X Height) |
|---|
| Price: | $59.99 |
|---|
S&F STEAD & FAST Annular Cutter Arbor, Morse Taper MT3 to 3/4 Inch Weldon Shank, Annular Cutter Adapter Used on Drill Press for Annular Cutters
S&F STEAD & FAST Annular Cutter Arbor, Morse Taper MT2 to 3/4 Inch Weldon Shank, Annular Cutter Adapter Used on Drill Press for Annular Cutters
Product DescriptionQuality Materials: Annular Cutter Arbor made with proprietary premium chrome-molybdenum alloy steel for enhanced toughness and hardness; long-service life and suitable for professional use
Precision Machining: CNC-machined high precision arbor for use on drill press, milling machine or shop equipment with a Morse Taper intake No. 2; designed to control spindle runout
Superior Accessories: Matching high-grade accessories to complete the tool holder set: imported set screws, allen key and spring
Compatibility: Suitable for all annular cutters with ¾ inch Weldon Shank (MT2 to 3/4” Weldon Shank)
Packaging: a Arbor tool securely packed in plastic case for protection during transportation and long-term storage
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Size: | MT2-Standard |
|---|
| Dimensions: | 6.4 X 1.95 X 1.95 Inches (Length X Width X Height) |
|---|
| Price: | $54.99 |
|---|
S&F STEAD & FAST Annular Cutter Arbor, Morse Taper MT2 to 3/4 Inch Weldon Shank, Annular Cutter Adapter Used on Drill Press for Annular Cutters
S&F STEAD & FAST Annular Cutter Arbor, Morse Taper MT3 to 3/4 Inch Weldon Shank & Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" Cutting Diameter 7/16" to 1-1/16" Inch
Product DescriptionFunction: Annular cutter arbor with Morse Taper MT3 is suitable for 3/4 inch weldon shank for annular cutters on drill press.
Inner Hole Grinding: The inner hole of the annular cutter arbor can be well matched cutter after fine grinding.
Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
11 HSS core drill bit cutting tool assortment set with Outside Diameter in inches: 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16",1 inch cutting depth for each drill cutter
What's in the package:1 Annular cutter arbor, 1 Allen key, 1 protective pouch and 1 plastic packaging box & Sturdy good-looking case holding an assortment of 11 annular bits, 2 pilot pins and a bonus hex wrench
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Model #: | cb29592e-38ce-4f4c-8a08-9b0f88367832 |
|---|
| Price: | $232.79 |
|---|
S&F STEAD & FAST Annular Cutter Arbor, Morse Taper MT3 to 3/4 Inch Weldon Shank & Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" Cutting Diameter 7/16" to 1-1/16" Inch
