S&F STEAD & FAST: 4+1 Annular Cutters, 2″ Depth Review – Pros & Cons – S&F STEAD & FAST

S&F STEAD & FAST - Annular Cutter, 7/16-inch Diameter x 1-inch Depth of Cut for Magnetic Drill Press, Mag Drill Bits with Pilot Pin

$24.99 @ Amazon.com

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

HSS annular drill bit with Outside Diameter 7/16 inch with 1 inch cutting depth

CNC-machined high precision drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results

IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.

Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.

Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.

S&F STEAD & FAST - Annular Cutter, 7/16-inch Diameter x 1-inch Depth of Cut for Magnetic Drill Press, Mag Drill Bits with Pilot Pin

S&F STEAD & FAST Annular Cutter Set, 2 inch Depth of Cut, 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2" Cutting Diameter, 3/4 Weldon Shank, Mag Drill Bits Kit for Magnetic Drill Press

$251.80 @ Amazon.com

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

Six HSS angular cutter bits with outside diameter in inches: 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2", 2 inch cutting depth for each annular drill bit cutter

CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results.

IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.

Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.

Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.

S&F STEAD & FAST Annular Cutter Set, 2 inch Depth of Cut, 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2" Cutting Diameter, 3/4 Weldon Shank, Mag Drill Bits Kit for Magnetic Drill Press

S&F STEAD & FAST Annular Cutter Set, 4-pc, 7/16" Diameter x 1" Depth of Cut for Magnetic Drill Press

$91.52 @ Amazon.com (Save 9%)

Mag drill bits made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

HSS annular drill bit x 4 pieces with Outside Diameter 7/16 inch with 1 inch Cutting Depth

CNC-machined high precision cutter drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use with mag drills and hold a firm steady pressure throughout the cut for best results with these annular cutters

Compatible with various brands of mag drill press including Alfra, BDS, Dewalt, Evolution, Fein, Euroboor, Hougen, Milwaukee, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is NOT included in this pack.

Sturdy plastic case x 4, each holding one annular cutter, one pilot pin

S&F STEAD & FAST Annular Cutter Set, 4-pc, 7/16" Diameter x 1" Depth of Cut for Magnetic Drill Press

S&F STEAD & FAST Carbide Annular Cutter 11/16" Cutting Diameter, 2" Depth of Cut, 3/4" Weldon Shank

$50.99 @ Amazon.com

Annular cutters made with tough and heat-treated alloy steel and imported high-performance ultra-high hardness (HRA 91-93) carbide tips to ensure high efficiency and superior service life

Carbide annular drill bit with outside diameter 11/16 inch and 2 inch cutting depth

CNC-machined high precision drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results.

Compatible with various brands of mag drill including Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, Ruko. CAUTION: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is not included in this pack but available in our Amazon store.

Design includes European tungsten carbide tips and product is engineered especially for cutting hard or corroded metals

Sturdy plastic case holding one annular cutter, one pilot pin

S&F STEAD & FAST Carbide Annular Cutter 11/16" Cutting Diameter, 2" Depth of Cut, 3/4" Weldon Shank

S&F STEAD & FAST Annular Cutter Set 13 Pcs, Cutting Depth 2" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins

$241.80 @ Amazon.com

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

11 HSS core drill bit cutting tool kit with cutting diameter in inches: 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16", 2 inch cutting depth for each annular drill cutter

CNC-machined high precision drill bit cutter set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results

IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.

Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.

Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.

S&F STEAD & FAST Annular Cutter Set 13 Pcs, Cutting Depth 2" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins

S&F STEAD & FAST Carbide Annular Cutter Set 5 Pcs, 3/4 Weldon Shank, Depth of Cut 2", Cutting Diameter 5/8, 11/16, 3/4, 13/16, 1-1/2", Mag Drill Bits Kit with Pilot Pin x 2

$209.99 ($42.00 / Count) @ Amazon.com

Carbide Tip: Annular drill bits made with tough and heat-treated alloy steel and European high-performance ultra-high hardness carbide tips (HRA 91-93) to ensure high efficiency and superior superior service life; no need for frequent replacements.

High Cutting Speed: With higher hardness and excellent heat resistance, each TCT annular cutter can cut at higher speeds, reducing machining time and saving on costs.

Engineered for Tough Materials: Designed specifically for cutting corroded or hard metals like stainless steel and tough alloys, these drill bits excel in demanding, high-precision applications, making them a reliable choice for professionals; the tungsten carbide tips keep their sharpness for longer.

Sizes: Carbide annular drill bit assortment consists of annular bits with cutting diameter of 5/8", 11/16", 3/4", 13/16" and 1-1/2" and a cutting depth of 2 inches

Precision Engineering: Each CNC-machined carbide tipped annular cutter has a 3/4 inch Weldon shank (with 2 flats) for secure clamping. Designed for smooth, reamed, burr-free edges of drilled holes, they deliver professional-quality results. Use firm, steady pressure throughout the cut for optimal performance.

Wide Compatibility: These annular cutters are compatible with various brands of magnetic drills, including Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, and Ruko. Caution: If using this annular cutter on a drill press, an additional annular cutter arbor is required (not included but available in our Amazon store).

S&F STEAD & FAST Carbide Annular Cutter Set 5 Pcs, 3/4 Weldon Shank, Depth of Cut 2", Cutting Diameter 5/8, 11/16, 3/4, 13/16, 1-1/2", Mag Drill Bits Kit with Pilot Pin x 2

S&F STEAD & FAST Annular Cutter Set, 3/4" Diameter x 1" Depth of Cut for Magnetic Drill Press, 2-pc + 1-pc

$92.06 ($30.69 / Count) @ Amazon.com

Mag drill bits made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

HSS annular drill bit x 3 pieces with Outside Diameter 3/4 inch with 1 inch Cutting Depth

CNC-machined high precision cutter drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use with mag drills and hold a firm steady pressure throughout the cut for best results with these annular cutters

Compatible with various brands of mag drill press including Alfra, BDS, Dewalt, Evolution, Fein, Euroboor, Hougen, Milwaukee, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is NOT included in this pack.

Sturdy plastic case x 3, each holding one annular cutter, one pilot pin

S&F STEAD & FAST Annular Cutter Set, 3/4" Diameter x 1" Depth of Cut for Magnetic Drill Press, 2-pc + 1-pc

S&F STEAD & FAST Annular Cutter Arbor, Morse Taper MT3 to 3/4 Inch Weldon Shank & Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" Cutting Diameter 7/16" to 1-1/16" Inch

$232.79 @ Amazon.com

Function: Annular cutter arbor with Morse Taper MT3 is suitable for 3/4 inch weldon shank for annular cutters on drill press.

Inner Hole Grinding: The inner hole of the annular cutter arbor can be well matched cutter after fine grinding.

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

11 HSS core drill bit cutting tool assortment set with Outside Diameter in inches: 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16",1 inch cutting depth for each drill cutter

What's in the package:1 Annular cutter arbor, 1 Allen key, 1 protective pouch and 1 plastic packaging box & Sturdy good-looking case holding an assortment of 11 annular bits, 2 pilot pins and a bonus hex wrench

S&F STEAD & FAST Annular Cutter Arbor, Morse Taper MT3 to 3/4 Inch Weldon Shank & Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" Cutting Diameter 7/16" to 1-1/16" Inch

S&F STEAD & FAST Annular Cutter Set, 9pcs, 2" Depth of Cut, 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2" Cutting Diameter, 1pc Annular Cutter Extension 3"/75mm for 3/4" Weldon Shank

$271.99 ($30.22 / Count) @ Amazon.com

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

Six HSS angular cutter bits with outside diameter in inches: 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2", 2 inch cutting depth for each annular drill bit cutter

Made with proprietary premium Chrome-Molybdenum alloy steel for enhanced toughness and hardness; long-service life and suitable for professional use.

Drill difficult to reach areas: weldon shank adapter extend cutter reach up to 3" or extend cutter reach over the side or through an exsisting hole.

What you will receive:sturdy aluminum case holding six pieces of 2 inch annular cutter and 2 pilot pins annular cutter extension x 1; hex shank x 1, securely packed in plastic case for protection during transportation and long-term storage.

S&F STEAD & FAST Annular Cutter Set, 9pcs, 2" Depth of Cut, 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2" Cutting Diameter, 1pc Annular Cutter Extension 3"/75mm for 3/4" Weldon Shank

Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" & S&F STEAD & FAST Annular Cutter Extension 3"/75mm for 3/4 Inch Weldon Shank

$216.99 @ Amazon.com

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

11 HSS core drill bit cutting tool assortment set with Outside Diameter in inches: 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16",1 inch cutting depth for each drill cutter

Made with proprietary premium Chrome-Molybdenum alloy steel for enhanced toughness and hardness; long-service life and suitable for professional use.

Drill difficult to reach areas: weldon shank adapter extend cutter reach up to 3" or extend cutter reach over the side or through an exsisting hole.

Sturdy good-looking case holding an assortment of 11 annular bits, 2 pilot pins and a bonus hex wrench and annular cutter extension x 1; hex shank x 1, securely packed in plastic case for protection during transportation and long-term storage.

Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" & S&F STEAD & FAST Annular Cutter Extension 3"/75mm for 3/4 Inch Weldon Shank