S&F STEAD & FAST: 2″ Annular Cutter Review – Pros & Cons – S&F STEAD & FAST

August 6, 2025 - Leave a Comment

When drilling thick metal, ordinary drill bits often struggle. But S&F STEAD & FAST: 2″ Annular Cutter is a different story. It’s like a cookie cutter for steel. This 2-inch diameter bit, also boasting a 2-inch cutting depth, cuts clean holes. Moreover, it includes a pilot pin. This pin guides the cutter perfectly. Therefore, your holes are accurate every time. This precision prevents wandering. Furthermore, it reduces bit breakage. Many users find this helpful. Consequently, drilling becomes much safer. Additionally, it feels less strenuous.

Next, consider its design. This S&F STEAD & FAST: 2″ Annular Cutter is not solid. Instead, it’s hollow. This innovative design has a huge advantage. It removes only a ring of material. Think of it like coring an apple. Thus, it creates a slug. This approach is much more efficient. It requires less power. Also, it generates less heat. Therefore, your drill press works less hard. And your bit lasts longer. For example, it’s a marathon runner. It keeps going and going. In short, it’s built for endurance.

Finally, let’s talk about performance. This S&F STEAD & FAST: 2″ Annular Cutter shines on magnetic drill presses. It truly unlocks their potential. The cuts are smooth. Also, the edges are clean. There’s minimal burring. Hence, less cleanup is needed. Furthermore, the bit removes material quickly. It’s a real time-saver. Additionally, it offers great value. Overall, it’s a solid investment. You’ll appreciate its durability. It’s definitely a workhorse. It helps you get jobs done faster.

FEATURES:
– Brand: S&F STEAD & FAST
– Tool type: Mag Drill Bits
– Diameter: 2 inches
– Cutting depth: 2 inches
– Quantity: 1 piece
– Cutter type: Annular Cutter
– Accessory: Pilot Pin included
– Compatibility: Magnetic Drill Press
– Function: Hole cutting
– Material: Not specified (typical for steel

This is one S&F STEAD & FAST drill bit, specially made for a magnetic drill press. It’s designed to cut 2-inch wide holes and can go 2 inches deep into material. This drill bit is called an annular cutter, and it comes with a pilot pin to help you make accurate holes. It’s great for cutting holes in materials like steel.

PROS:
– Excellent product
– Very good durability
– Works great
– Awesome cutter
– Cut all holes with no issues
– 425 holes on one bit
– Last hole cut like the first
– Definitely recommend
– Drilled 64 holes through 1
– Last hole drilled as fast as the first
– Good accurate cutter
– Cut very well
– Make an accurate hole
– Just as sharp in the end
– Long lasting with cutting oil
– Nice and fast
– Safely and easy

The S&F STEAD & FAST 2″ diameter magnetic drill bit is an excellent and highly recommended product known for its durability and consistent performance. Users reported cutting a high number of holessome even 425 holes with a single bitwith the last hole being cut as cleanly and quickly as the first. This annular cutter provides accurate, fast, and easy drilling, especially when used with a pilot pin and cutting oil, making it a reliable choice for magnetic drill presses. Read more…

About DrillPressReview.Com

DrillPressReview.com is a place of popular drilling machines reviews based on users' rating and reviews in various machinery forums, shopping websites. All the drill press reviews are written based on extensive research by gathering data from various marketplaces, forums and top reviews websites. Most of the drill press machines reviews are from top brands like Grizzly, Jet, Rikon, Powertec, Black & Bull, Craftsman and various others. It includes almost all types of drilling machines such as floor model drilling machines, bench-top drill presses, hand drills, cordless drilling machines, magnetic drill presses, rotary hammer drill and many others.

View all posts by DrillPressReview.Com →

S&F STEAD & FAST Annular Cutter Set, 2 inch Depth of Cut, 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2" Cutting Diameter, 3/4 Weldon Shank, Mag Drill Bits Kit for Magnetic Drill Press

$251.80 @ Amazon.com

Product Description

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

Six HSS angular cutter bits with outside diameter in inches: 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2", 2 inch cutting depth for each annular drill bit cutter

CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results.

IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.

Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.

Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.

Product Details

Brand:	S&F STEAD & FAST
Size:	3/4" shank 2" cutting depth Large
Color:	Silver
Price:	$251.80

S&F STEAD & FAST Annular Cutter Set, 2 inch Depth of Cut, 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2" Cutting Diameter, 3/4 Weldon Shank, Mag Drill Bits Kit for Magnetic Drill Press

S&F STEAD & FAST Annular Cutter Set, 2-pc, 7/8" Diameter x 1" Depth of Cut for Magnetic Drill Press

$67.98 ($11.33 / Count) @ Amazon.com

Product Description

Mag drill bits made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

HSS annular drill bit x 2 pieces with Outside Diameter 7/8 inch with 1 inch Cutting Depth

CNC-machined high precision cutter drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use with mag drills and hold a firm steady pressure throughout the cut for best results with these annular cutters

Compatible with various brands of mag drill press including Alfra, BDS, Dewalt, Evolution, Fein, Euroboor, Hougen, Milwaukee, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is NOT included in this pack.

Sturdy plastic case x 2, each holding one annular cutter, one pilot pin

Product Details

Brand:	S&F STEAD & FAST
Price:	$67.98 ($11.33 / Count)

S&F STEAD & FAST Annular Cutter Set, 2-pc, 7/8" Diameter x 1" Depth of Cut for Magnetic Drill Press

S&F STEAD & FAST HSS Annular Cutter 13/16" Diameter 2" Cutting Depth, Mag Drill Bits with Pilot Pin for Magnetic Drill Press

$33.99 @ Amazon.com (Save 6%)

Product Description

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

HSS annular drill bit with Outside Diameter 13/16 inch with 2 inch cutting depth

CNC-machined high precision drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results

Compatible with various brands of mag drill including Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, Ruko. Caution: if you want to use this 2 inch annular cutter on a drill press, you need an extra annular cutter arbor for the 2 inch bit. Arbor is not included in this pack.

Sturdy plastic case holding one annular cutter, one pilot pin

Multiple piece sets of this size annular cutter are available in our store

Product Details

Brand:	S&F STEAD & FAST
Model #:	ZXT-HAZ-023
Size:	13/16" x 2"
Dimensions:	4 X 3 X 3 Inches (Length X Width X Height)
Price:	$33.99 (Save 6%)

S&F STEAD & FAST HSS Annular Cutter 13/16" Diameter 2" Cutting Depth, Mag Drill Bits with Pilot Pin for Magnetic Drill Press

S&F STEAD & FAST Carbide Annular Cutter 2-1/2" Cutting Diameter, 2" Depth of Cut, 3/4" Weldon Shank

$150.99 @ Amazon.com

Product Description

Annular cutters made with tough and heat-treated alloy steel and imported high-performance ultra-high hardness carbide tips (HRA 91-93) to ensure high efficiency and superior service life.

Carbide annular drill bit with outside diameter 2-1/2 inch and 2 inch cutting depth.

Compatible with various brands of mag drill including Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, Ruko. CAUTION: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is not included in this pack but available in our Amazon store.

Design for these annular drill bits includes European tungsten carbide tips and product is engineered especially for cutting hard or corroded metals

Sturdy plastic case holding one annular cutter, one pilot pin

Product Details

Brand:	S&F STEAD & FAST
Model #:	05060917981552
Size:	2-1/2 x 2''
Price:	$150.99

S&F STEAD & FAST Carbide Annular Cutter 2-1/2" Cutting Diameter, 2" Depth of Cut, 3/4" Weldon Shank

Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins

$194.80 ($12.99 / Count) @ Amazon.com

Product Description

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

11 HSS core drill bit cutting tool assortment set with Outside Diameter in inches: 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16",1 inch cutting depth for each drill cutter

IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.

Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.

Product Details

Brand:	S&F STEAD & FAST
Size:	3/4 inch shank
Dimensions:	8.267716527 X 3.149606296 X 8.0708661335 inches (Length X Width X Height)
Price:	$194.80 ($12.99 / Count)

Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins

S&F STEAD & FAST Annular Cutter Set 13 Pcs, Cutting Depth 2" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins

$241.80 @ Amazon.com

Product Description

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

11 HSS core drill bit cutting tool kit with cutting diameter in inches: 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16", 2 inch cutting depth for each annular drill cutter

CNC-machined high precision drill bit cutter set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results

IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.

Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.

Product Details

Brand:	S&F STEAD & FAST
Size:	3/4 inch shank
Price:	$241.80

S&F STEAD & FAST Annular Cutter Set 13 Pcs, Cutting Depth 2" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins

S&F STEAD & FAST Annular Cutter Arbor, Morse Taper MT2 to 3/4 Inch Weldon Shank, Annular Cutter Adapter Used on Drill Press for Annular Cutters

$54.99 @ Amazon.com

Product Description

Quality Materials: Annular Cutter Arbor made with proprietary premium chrome-molybdenum alloy steel for enhanced toughness and hardness; long-service life and suitable for professional use

Precision Machining: CNC-machined high precision arbor for use on drill press, milling machine or shop equipment with a Morse Taper intake No. 2; designed to control spindle runout

Superior Accessories: Matching high-grade accessories to complete the tool holder set: imported set screws, allen key and spring

Compatibility: Suitable for all annular cutters with ¾ inch Weldon Shank (MT2 to 3/4” Weldon Shank)

Packaging: a Arbor tool securely packed in plastic case for protection during transportation and long-term storage

Product Details

Brand:	S&F STEAD & FAST
Size:	MT2-Standard
Dimensions:	6.4 X 1.95 X 1.95 Inches (Length X Width X Height)
Price:	$54.99

S&F STEAD & FAST Annular Cutter Arbor, Morse Taper MT2 to 3/4 Inch Weldon Shank, Annular Cutter Adapter Used on Drill Press for Annular Cutters

S&F STEAD & FAST Carbide Annular Cutter Set 5 Pcs, 3/4 Weldon Shank, Depth of Cut 2", Cutting Diameter 5/8, 11/16, 3/4, 13/16, 1-1/2", Mag Drill Bits Kit with Pilot Pin x 2

$209.99 ($42.00 / Count) @ Amazon.com

Product Description

Carbide Tip: Annular drill bits made with tough and heat-treated alloy steel and European high-performance ultra-high hardness carbide tips (HRA 91-93) to ensure high efficiency and superior superior service life; no need for frequent replacements.

High Cutting Speed: With higher hardness and excellent heat resistance, each TCT annular cutter can cut at higher speeds, reducing machining time and saving on costs.

Engineered for Tough Materials: Designed specifically for cutting corroded or hard metals like stainless steel and tough alloys, these drill bits excel in demanding, high-precision applications, making them a reliable choice for professionals; the tungsten carbide tips keep their sharpness for longer.

Sizes: Carbide annular drill bit assortment consists of annular bits with cutting diameter of 5/8", 11/16", 3/4", 13/16" and 1-1/2" and a cutting depth of 2 inches

Precision Engineering: Each CNC-machined carbide tipped annular cutter has a 3/4 inch Weldon shank (with 2 flats) for secure clamping. Designed for smooth, reamed, burr-free edges of drilled holes, they deliver professional-quality results. Use firm, steady pressure throughout the cut for optimal performance.

Wide Compatibility: These annular cutters are compatible with various brands of magnetic drills, including Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, and Ruko. Caution: If using this annular cutter on a drill press, an additional annular cutter arbor is required (not included but available in our Amazon store).

Product Details

Brand:	S&F STEAD & FAST
Model #:	05060917981514
Price:	$209.99 ($42.00 / Count)

S&F STEAD & FAST Carbide Annular Cutter Set 5 Pcs, 3/4 Weldon Shank, Depth of Cut 2", Cutting Diameter 5/8, 11/16, 3/4, 13/16, 1-1/2", Mag Drill Bits Kit with Pilot Pin x 2

S&F STEAD & FAST Annular Cutter Set, 9pcs, 2" Depth of Cut, 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2" Cutting Diameter, 1pc Annular Cutter Extension 3"/75mm for 3/4" Weldon Shank

$271.99 ($30.22 / Count) @ Amazon.com (Save 5%)

Product Description

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

Six HSS angular cutter bits with outside diameter in inches: 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2", 2 inch cutting depth for each annular drill bit cutter

Made with proprietary premium Chrome-Molybdenum alloy steel for enhanced toughness and hardness; long-service life and suitable for professional use.

Drill difficult to reach areas: weldon shank adapter extend cutter reach up to 3" or extend cutter reach over the side or through an exsisting hole.

What you will receive:sturdy aluminum case holding six pieces of 2 inch annular cutter and 2 pilot pins annular cutter extension x 1; hex shank x 1, securely packed in plastic case for protection during transportation and long-term storage.

Product Details

Brand:	S&F STEAD & FAST
Price:	$271.99 ($30.22 / Count) (Save 5%)

S&F STEAD & FAST Annular Cutter Set, 9pcs, 2" Depth of Cut, 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2" Cutting Diameter, 1pc Annular Cutter Extension 3"/75mm for 3/4" Weldon Shank

Annular Cutter Set 6 Pcs, Depth of Cut 2”, Cutting Diameter 7/16 to 1-1/16 Inch & S&F STEAD & FAST Annular Cutter Extension 3"/75mm for 3/4 Inch Weldon Shank

$147.99 ($24.66 / Count) @ Amazon.com (Save 6%)

Product Description

Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life

6 HSS core drill bit cutting tool kit set with cutting diameter in inches: 7/16, 9/16, 11/16, 13/16, 15/16, 1-1/16, 2 inch cutting depth for each annular drill cutter

Made with proprietary premium Chrome-Molybdenum alloy steel for enhanced toughness and hardness; long-service life and suitable for professional use.

Drill difficult to reach areas: weldon shank adapter extend cutter reach up to 3" or extend cutter reach over the side or through an exsisting hole.

What you will receive: sturdy plastic case holding an assortment of 6 annular bits, 2 pilot pins, 1 hex wrench，annular cutter extension x 1; hex shank x 1, securely packed in plastic case for protection during transportation and long-term storage.

Product Details

Brand:	S&F STEAD & FAST
Price:	$147.99 ($24.66 / Count) (Save 6%)

Annular Cutter Set 6 Pcs, Depth of Cut 2”, Cutting Diameter 7/16 to 1-1/16 Inch & S&F STEAD & FAST Annular Cutter Extension 3"/75mm for 3/4 Inch Weldon Shank

Please share this: