S&F STEAD & FAST Annular Cutter, 9/16” Cutting Diameter x 1” Depth of Cut for Magnetic Drill Press, Mag Drill Bits with Pilot Pin
Product DescriptionAnnular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
HSS annular drill bit with Outside Diameter 9/16 inch with 1 inch cutting depth
CNC-machined high precision drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Model #: | ZXT-HAZ-006 |
|---|
| Size: | 9/16" x 1" |
|---|
| Dimensions: | 2.44 X 0.56 X 2.44 inches (Length X Width X Height) |
|---|
| Price: | $30.99 |
|---|
S&F STEAD & FAST Annular Cutter, 9/16” Cutting Diameter x 1” Depth of Cut for Magnetic Drill Press, Mag Drill Bits with Pilot Pin
Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins
Product DescriptionAnnular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
11 HSS core drill bit cutting tool assortment set with Outside Diameter in inches: 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16",1 inch cutting depth for each drill cutter
CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Size: | 3/4 inch shank |
|---|
| Dimensions: | 8.267716527 X 3.149606296 X 8.0708661335 inches (Length X Width X Height) |
|---|
| Price: | $194.80 ($12.99 / Count) |
|---|
Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins
SALI Annular Cutter Diameter 9/16 Inch with Weldon Shank 3/4" (with 2 Flats) Cutting Depth 2" Mag Drill Bit for Magnetic Drill Press HSS Fully Ground Drill with One 1/4"*4" Pilot Pin…
Product DescriptionSize：Diameter 9/16”，cutting depth 2”，weldon shank 3/4”，pilot pin：1/4”*4”
Annular cutters made with super tough m93al high speed steel (hss) for durability, wear resistance, high efficiency and superior service life
Cnc-machined high precision annular drill bit set with 3/4 inch weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for better results
Compatible with various brands of magnetic drills including alfra, bds, dewalt, euroboor, hougen, ruko. Caution: If you want to use this annular cutter on a drill press, you need an extra annular cutter arbor for the drill bit cutter. Arbor is not included in this pack
Sturdy plastic case holding one annular cutter, one pilot pin
Product Details| Brand: | SALI |
|---|
| Model #: | 228940328 |
|---|
| Size: | 9/16"*2" |
|---|
| Price: | $17.99 |
|---|
SALI Annular Cutter Diameter 9/16 Inch with Weldon Shank 3/4" (with 2 Flats) Cutting Depth 2" Mag Drill Bit for Magnetic Drill Press HSS Fully Ground Drill with One 1/4"*4" Pilot Pin…
OSCARBIDE 9/16"x2" Annular Cutter,9/16 inch Cutting Diameter,2 inch Depth of Cut,3/4 inch Weldon Shank with 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece
Product DescriptionAnnular Cutter Size :9/16” Cutting Diameter,2"Cutting Depth, 3/4” Weldon Shank with 2 Flat,Pilot Piin Size: 6.34x102mm.
OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.
These HSS Slugger Bit ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.
OSCARBIDE annular Bit fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders
These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel
Product Details| Brand: | OSCARBIDE |
|---|
| Price: | $19.99 |
|---|
OSCARBIDE 9/16"x2" Annular Cutter,9/16 inch Cutting Diameter,2 inch Depth of Cut,3/4 inch Weldon Shank with 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece
S&F STEAD & FAST Annular Cutter Set 13 Pcs, Cutting Depth 2" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins
Product DescriptionAnnular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
11 HSS core drill bit cutting tool kit with cutting diameter in inches: 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16", 2 inch cutting depth for each annular drill cutter
CNC-machined high precision drill bit cutter set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Size: | 3/4 inch shank |
|---|
| Price: | $241.80 |
|---|
S&F STEAD & FAST Annular Cutter Set 13 Pcs, Cutting Depth 2" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins
S&F STEAD & FAST Carbide Annular Cutter 9/16" Cutting Diameter, 2" Depth of Cut, 3/4" Weldon Shank
Product DescriptionAnnular cutters made with tough and heat-treated alloy steel and imported high-performance ultra-high hardness carbide tips (HRA 91-93) to ensure high efficiency and superior service life.
Carbide annular drill bit with outside diameter 9/16 inch and 2 inch cutting depth.
CNC-machined high precision drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results.
Compatible with various brands of mag drill including Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, Ruko. CAUTION: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is not included in this pack but available in our Amazon store.
Design for these annular drill bits includes European tungsten carbide tips and product is engineered especially for cutting hard or corroded metals
Sturdy plastic case holding one annular cutter, one pilot pin
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Size: | 9/16 x 2'' |
|---|
| Price: | $44.99 |
|---|
S&F STEAD & FAST Carbide Annular Cutter 9/16" Cutting Diameter, 2" Depth of Cut, 3/4" Weldon Shank
OSCARBIDE 9/16"x1"Annular Cutter 9/16 inch Cutting Diameter,1 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece
Product DescriptionAnnular Cutter Size :9/16”Cutting Diameter,1"Cutting Depth, 3/4” Weldon Shank with 2 Flat,Pilot Piin Size: 6.34x77mm
OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.
These HSS Slugger Bit ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.
OSCARBIDE annular Bit fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders
These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel
Product Details| Brand: | OSCARBIDE |
|---|
| Price: | $17.99 |
|---|
OSCARBIDE 9/16"x1"Annular Cutter 9/16 inch Cutting Diameter,1 inch Depth of Cut,3/4 inch Weldon Shank 2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece
OSCARBIDE 1-9/16"x1 Annular Cutter,3/4 inch Weldon Shank,1-9/16 inch Cutting Diameter,1 inch Depth of Cut,2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece
Product DescriptionAnnular Cutter Size :1-9/16”Cutting Diameter,1"Cutting Depth, 3/4” Weldon Shank with 2 Flat,Pilot Piin Size: 6.34x77mm
OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time
These HSS Slugger Bit ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips
OSCARBIDE annular Bit fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders
These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel
Product Details| Brand: | OSCARBIDE |
|---|
| Model #: | 1-9/16x1 |
|---|
| Price: | $27.99 |
|---|
OSCARBIDE 1-9/16"x1 Annular Cutter,3/4 inch Weldon Shank,1-9/16 inch Cutting Diameter,1 inch Depth of Cut,2 Flat Mag Drill Bit with Pilot Pin for Magnetic Drill Press,1 Piece
Drill America - KFDRSD9/16 9/16" Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 1/2" Shank, KFD Series
Product DescriptionHigh-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
Gold and black surface treated for use in stainless steel and other hard metal drilling
Round shanks allow use with a wide variety of toolholding systems
When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
Heavy duty 135 degree split point
Product Details| Brand: | Drill America |
|---|
| Model #: | KFDRSD9/16 |
|---|
| Size: | 9/16" |
|---|
| Color: | 3-Flat |
|---|
| Dimensions: | 6 X 4 X 2 inches (Length X Width X Height) |
|---|
| Price: | $9.21 |
|---|
Drill America - KFDRSD9/16 9/16" Reduced Shank High Speed Steel Black & Gold KFD Drill Bit with 1/2" Shank, KFD Series
Pro Edge 11pcs Annular Cutter Set, 1" Cutting Depth, 7/16" to 1-1/16" Cutting Diameter, M2 Mag Drill Bits for Magnetic Drill Press with 2 Pilot Pin & 1 Hex Wrench, for Steel, Aluminum, Copper
Product Description【Cost-effective combination】: A combination of 11 commonly used sizes of annular cutters with a 1-inch cutting depth(7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16"). It also includes 1 piece of 1/4” hex wrench and 2 pieces of 6.35mm x 77mm pilot pins.
【M2 HSS】: M2 high-speed steel has excellent hardness (usually 62 - 65 HRC), toughness and wear resistance after heat treatment.(2-3x Longer Life than normal HSS Drill Bits)
【Weldon Shank】: The design of the Weldon Shank effectively reduces vibration and deviation of the sheet metal drill during high-speed rotational cutting, ensuring machining precision. It is easy to install and compatible with most brands of magnetic drill machines on the market, such as Alfra, BDS, Dewalt, Hougen, VEVOR, S&F.
【Multiple Application Scenarios】: The annular cutter set is suitable for various metals, such as Steel, Aluminum, Copper, etc. It is widely used in industrial fields, including machining, repair, mold manufacturing, etc.
【Safety Precaution】: Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and protective clothing. Do not attempt to touch or adjust the cutter while it is in operation. Keep hands and other body parts away from the working tool.
Product Details| Brand: | Pro Edge Technology |
|---|
| Size: | 11pcs 7/16"-1-1/16" |
|---|
| Dimensions: | 10.236220462 X 9.83858266713 X 2.03937007666 Inches (Length X Width X Height) |
|---|
| Price: | $129.99 ($9.28 / Count) |
|---|
Pro Edge 11pcs Annular Cutter Set, 1" Cutting Depth, 7/16" to 1-1/16" Cutting Diameter, M2 Mag Drill Bits for Magnetic Drill Press with 2 Pilot Pin & 1 Hex Wrench, for Steel, Aluminum, Copper
