Magswitch Drill Press Fence Pro, Powerful, Switchable Magnets, Woodworking Table Saw Tools Accessories for Drills
Product DescriptionPowerful magnets allow quick positioning and fine adjustment of the fence and make it easy to remove and store when a fence is not needed.
Mounting Magnets (Two are included) can be positioned at different points on the fence for optimal placement on drill press tables
The sturdy large vertical plate that will not interfere with the drill chuck, even when drilling holes close to the fence, and can be used as a bandsaw resaw fence.
The Magnetic Stop block (1 is included) can be quickly be positioned flush with the drill press table or sacrificial material under the workpiece, and can be stored out of the way when it is not needed.
The fence plate is 21 inches long by 4 5/16 inches high.
Product DetailsBrand: | Magswitch |
---|
Model #: | 81101371 |
---|
Color: | Silver |
---|
Dimensions: | 20.9842519471 X 20.9842519471 X 4.312 inches (Length X Width X Height) |
---|
Price: | $310.99 |
---|
Magswitch Drill Press Fence Pro, Powerful, Switchable Magnets, Woodworking Table Saw Tools Accessories for Drills
Woodpeckers DP-Pro Master System, 36/36 Model, Precision Woodworking Drill Press Table
Product DescriptionINCLUDES - 36" Table, 36" Fence, Drawer Base, (2) Flip Stops, and (2) Knuckle Clamps.
ALL NEW DP-PRO FENCE - The heart of the system is now made tall enough to support vertical work as well as horizontally. We also created the new DP-PRO Flip Stops with built-in thumbwheel micro-adjustment to match the fence perfectly.
INTEGRATED DUST COLLECTION - The new taller fence was turned into an integrated dust collection duct with its opening right at the center of the fence where the chips are created. Just attach a vacuum or dust collector at the port at the end of the fence (either side).
SLIDE OUT EXTENSION WINGS - The table is designed with extension wings that slide out for extra support when you need it and tuck back in tight to the central table and out of the way when you don't. The 36" table is 24" closed and 36" extended.
NEWLY DESIGNED DP-PRO DRAWER BASE - The foundation of the system solves both problems of attaching to an exisiting table and maintaining clearance fo the elevation crank. It includes hardware to fit virtually any drill press table wheter it has T-Slots or through-slots, diagonal or parallel.
Product DetailsBrand: | Woodpeckers |
---|
Size: | 36/36 |
---|
Color: | Red |
---|
Price: | $649.99 |
---|
Woodpeckers DP-Pro Master System, 36/36 Model, Precision Woodworking Drill Press Table
Milescraft 1349 Drill Fence – Portable Drill Press Edge Guide Attachment for Milescraft 1348 DrillMatePRO. 1-7/16” to 12-5/8” Range with Metal Construction for Drilling Straight Holes
Product DescriptionNOT DESIGNED TO WORK WITH OTHER PRODUCTS. Exclusively for the 1349 DrillMatePRO
All metal construction reduces flexing and keeps holes consistently spaced from edge of work piece
Wide metal edge guide keeps DrillMatePRO in place when drilling
Drill holes aligned from 1-7/16” to 12-5/8” (37mm to 320mm) from the edge of a board
Increase the reach of the DrillFence with optional extension rods
Product DetailsBrand: | Milescraft |
---|
Model #: | 1349 |
---|
Price: | $34.99 |
---|
Milescraft 1349 Drill Fence – Portable Drill Press Edge Guide Attachment for Milescraft 1348 DrillMatePRO. 1-7/16” to 12-5/8” Range with Metal Construction for Drilling Straight Holes
POWERTEC Drill Press Fence Set w/T Slot 24", Hardware Kit for T-Slot Drill Press Table Tops, Laser Etched Scale, Reversible, T Track Hold Down Adjustable Clamps, Flip Stops, Mounting Brackets - 71633
Product DescriptionCOMPREHENSIVE DRILL PRESS FENCE KIT: Our hardware kit includes (1) 24" T Slot Fence, (2) T Track Hold Down Clamps, (1) Fence Flip Stop, and (1) Hardware Kit w/ Multi Track Brackets and Clamping Knob Hardware, enhancing your drill press table setup.
DURABLE HIGH QUALITY BUILD: Crafted from durable aluminum and plastic materials, this fence set ensures long-lasting performance and reliability for your drill press projects as a valuable addition in your workshop for use on wood, metal and plastics
LASER ETCHED T-TRACK FENCE: Reversible laser etched scale on metal fence works for left or right use, spaced 3/4” apart (on center), 3/4” thick and 3" high. Drill press fence set works seamlessly with most T Slot Drill Press Tables and Powertec 71539
EASY SETUP POSITIONING & ADJUSTMENTS: Included accessories and 5 star knobs allow for precise mounting, positioning, easy adjustments and secure clamping of workpieces to improve accuracy, safety and adaptability for all types of woodworking projects
40 YEARS WOODWORKING EXPERTS: POWERTEC manufactures high quality best selling woodworking products from machines, accessories, measuring equipment, and tools. Each product is meticulously designed to exceed your needs and get projects done!
Product DetailsBrand: | POWERTEC |
---|
Model #: | 71633 |
---|
Size: | 24" |
---|
Color: | Multi Color |
---|
Dimensions: | 24 X 2.98 X 0.55 inches (Length X Width X Height) |
---|
Price: | $74.99 |
---|
POWERTEC Drill Press Fence Set w/T Slot 24", Hardware Kit for T-Slot Drill Press Table Tops, Laser Etched Scale, Reversible, T Track Hold Down Adjustable Clamps, Flip Stops, Mounting Brackets - 71633
Taytools 388220 Magnetic Bandsaw and Drill Press Fence with Switchable Magnets 18-Inch-Long x 3-Inch-Tall Fence with Blade Drift Adjustment
Product DescriptionThis magnetic fence can be used on any bandsaw or drill press with a magnetic ferrous table. One will not work on saws with cast or plastic tables. It can be quickly and easily installed and removed from a bandsaw or drill press table by simply turning on/off the two magnet levers.
One can be installed and used without installing an aftermarket bandsaw fence with guide rails and can be used on bandsaws where the blade slot exits to the front of saws that will not accept aftermarket fences. Using the T fence, the fence can be set to accommodate for blade drift
Specifications: 18” long by 3” tall, so it will work with most 10” to 18” bandsaws. Multiple T slots on fence will accept numerous stops, auxiliary fences, and jigs. Slots will accept 1/4-20 hex head bolts or Taytools 1/4” or 5/16” T bolts.
Adjustable T fence allows the fence angle to be set to compensate for blade drift
Comes standard with two 150-pound breakaway strength 90-degree switchable magnets Fence to table angle is calibrated to 90 degrees out of the box and will never need to be adjusted and fence is milled straight. Magnets can be installed in one of four locations to accommodate for various bandsaw table sizes and additional magnets can be added (up to four) to increase holding power
Product DetailsBrand: | Taytools |
---|
Model #: | 388220 |
---|
Size: | 18" long x 3" tall |
---|
Color: | Blue |
---|
Dimensions: | 18 X 3 X 0.01 inches (Length X Width X Height) |
---|
Price: | $149.99 |
---|
Taytools 388220 Magnetic Bandsaw and Drill Press Fence with Switchable Magnets 18-Inch-Long x 3-Inch-Tall Fence with Blade Drift Adjustment
Telpro Inc. 350 Drillrite Overhead Drill Press, Yellow
Product DescriptionReduces musculoskeletal strain associated with operating rotary hammer drills overhead
Reduces risk of job-site falls by eliminating the need for ladders for overhead drilling
Patent Pending integrated dust extraction system captures dangerous airborne silica dust
Reaches 12’ ceilings
Holds a wide variety of rotary hammer drills
Drill and Vacuum sold separately
Product DetailsBrand: | Telpro Inc. |
---|
Model #: | 350 |
---|
Color: | Yellow |
---|
Dimensions: | 24 X 24 X 84 inches (Length X Width X Height) |
---|
Price: | $1,999.99 |
---|
Telpro Inc. 350 Drillrite Overhead Drill Press, Yellow
Milescraft 1318 DrillMate Portable Drillling Guide – Precision Drilling Jig Attachment for Drilling Angled or Straight Holes, Adjustable Drill Guide Attachment, Portable Drill Press with 3/8” Chuck

$39.82
@ Amazon.com (Save 20%)
Product DescriptionPremium Home Improvement Tools: Perfect for straight or angled drilling; drilling on the edge of a board or on round stock
Sturdy Woodworking Tools: Attaches to all 3/8" & 1/2" cordless drills; it also includes a 3/8" capacity chuck with key
Multiple Angle Settings: Angle readout for setting drilling angles to 45°, 60°, 75°, and 90°
Versatile Carpentry Tools: Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
Premium Milescraft Tools: We offer products that help woodworkers and do-it-yourselfers to complete projects quickly, accurately, and easily.
Product DetailsBrand: | Milescraft |
---|
Model #: | 1318 |
---|
Warranty: | Warranty |
---|
Size: | 1 PACK |
---|
Color: | Black Red Grey |
---|
Dimensions: | 16 X 5.5 X 18 inches (Length X Width X Height) |
---|
Price: | $39.82 (Save 20%) |
---|
Milescraft 1318 DrillMate Portable Drillling Guide – Precision Drilling Jig Attachment for Drilling Angled or Straight Holes, Adjustable Drill Guide Attachment, Portable Drill Press with 3/8” Chuck
DuBois 51031 24" Drill Press Fence Set w/Mounting Brackets, Stops, Clamps, Handles, Knobs, and Hardware for T-Slot Drill Press Table Tops
Product DescriptionINCLUDES: 24 Inch Fence with adhesive zero center scale, Adjustable Multi-T-Track Flip Stop, Hold Down Clamps, Handles, Assorted T-Track Knobs, Mounting Brackets and Hardware
24 INCH FENCE - The multi t-track fence is with adhesive zero center scale, equipped with brackets that slide (right to left) in the embedded track. The fence brackets which include t-bolts with ¼”-20 threads and accept the most common accessory fasteners, slide smoothly and lock securely
VERSATILITY: T-Bolts fit universal t-track and allow installation on most drill presses on the market. Create versatile jigs, fixtures, or hold-downs to meet your workshop needs, such as a drill table, bench vise, corner clamp, fence clamp, and more new clamp solutions
ADDED FLEXIBILITY: The flip stop can be adjusted from 1 inch to 3-1/2 inches for repeatable positioning. You can move it from right to left to match your feed direction requirements
PREMIUM: Features components made with corrosion resistant aluminum, providing a heavy duty construction for long-term durability, intended to withstand the scratches and abrasive nature of woodworking applications
Product DetailsBrand: | DuBois |
---|
Model #: | 51031 |
---|
Size: | Drill Press Fence Set |
---|
Price: | $69.99 |
---|
DuBois 51031 24" Drill Press Fence Set w/Mounting Brackets, Stops, Clamps, Handles, Knobs, and Hardware for T-Slot Drill Press Table Tops
Rockler Drill Press Fence
Product DescriptionProduct DetailsBrand: | ROCKLER |
---|
Price: | $79.99 |
---|
Rockler Drill Press Fence
Woodriver Deluxe Drill Press Fence
Product DescriptionDesigned for WoodRiver Drill Press Table (SOLD SEPARATELY) – Can be adapted to other tables
2-1/4" x 2" x 24" L-Shaped Fence Extrusion constructed of 1/4"-Thick aluminum
3/4" Fence Faces minimize tear-out for off-edge drilling
2-5/8"- wide opening provides chuck clearance and for large diameter bits - Includes 2-1/4" ID dust port for sanding and other operations
WoodRiver is proudly made by Woodcraft, America’s leading supplier of high-quality woodworking hand tools, power tools, domestic and exotic wood, shop supplies, project plans and kits, plus so much more! Offering first-rate products for all your woodworking needs and designed to help you make wood work. Our family of brands include Woodcraft tools and supplies, Highpoint professional-grade fasteners and hardware, Pinnacle precision-engineered tools and Woodcraft Magazine.
Product DetailsBrand: | WOODRIVER |
---|
Model #: | 165954 |
---|
Dimensions: | 24.9 X 5.9 X 2.7 inches (Length X Width X Height) |
---|
Price: | $131.98 |
---|
Woodriver Deluxe Drill Press Fence