S&F STEAD & FAST Annular Cutter Set, 2 inch Depth of Cut, 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2" Cutting Diameter, 3/4 Weldon Shank, Mag Drill Bits Kit for Magnetic Drill Press
Product DescriptionAnnular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
Six HSS angular cutter bits with outside diameter in inches: 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2", 2 inch cutting depth for each annular drill bit cutter
CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results.
IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Size: | 3/4" shank 2" cutting depth Large |
|---|
| Color: | Silver |
|---|
| Price: | $251.80 |
|---|
S&F STEAD & FAST Annular Cutter Set, 2 inch Depth of Cut, 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2" Cutting Diameter, 3/4 Weldon Shank, Mag Drill Bits Kit for Magnetic Drill Press
S&F STEAD & FAST Annular Cutter Set, 2-pc, 9/16" Diameter x 2" Depth of Cut for Magnetic Drill Press
Product DescriptionMag drill bits made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
HSS annular drill bit x 2 pieces with Outside Diameter 9/16 inch with 2 inch Cutting Depth
CNC-machined high precision cutter drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use with mag drills and hold a firm steady pressure throughout the cut for best results with these annular cutters
Compatible with various brands of mag drill press including Alfra, BDS, Dewalt, Evolution, Fein, Euroboor, Hougen, Milwaukee, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is NOT included in this pack.
Sturdy plastic case x 2, each holding one annular cutter, one pilot pin
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Price: | $56.98 ($9.50 / Count) (Save 11%) |
|---|
S&F STEAD & FAST Annular Cutter Set, 2-pc, 9/16" Diameter x 2" Depth of Cut for Magnetic Drill Press
S&F STEAD & FAST Carbide Annular Cutter 2-1/2" Cutting Diameter, 2" Depth of Cut, 3/4" Weldon Shank
Product DescriptionAnnular cutters made with tough and heat-treated alloy steel and imported high-performance ultra-high hardness carbide tips (HRA 91-93) to ensure high efficiency and superior service life.
Carbide annular drill bit with outside diameter 2-1/2 inch and 2 inch cutting depth.
CNC-machined high precision drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results.
Compatible with various brands of mag drill including Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, Ruko. CAUTION: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is not included in this pack but available in our Amazon store.
Design for these annular drill bits includes European tungsten carbide tips and product is engineered especially for cutting hard or corroded metals
Sturdy plastic case holding one annular cutter, one pilot pin
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Model #: | 05060917981552 |
|---|
| Size: | 2-1/2 x 2'' |
|---|
| Price: | $150.99 |
|---|
S&F STEAD & FAST Carbide Annular Cutter 2-1/2" Cutting Diameter, 2" Depth of Cut, 3/4" Weldon Shank
S&F STEAD & FAST HSS Annular Cutter 9/16" Cutting Diameter 2" Depth of Cut, 3/4" Weldon Shank, Mag Drill Bit with Pilot Pin for Magnetic Drill Press
Product DescriptionAnnular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
HSS annular drill bit with Outside Diameter 9/16 inch with 2 inch cutting depth
CNC-machined high precision drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Model #: | ZXT-HAZ-019 |
|---|
| Size: | 9/16" x 2" |
|---|
| Dimensions: | 4 X 3 X 3 inches (Length X Width X Height) |
|---|
| Price: | $29.99 (Save 9%) |
|---|
S&F STEAD & FAST HSS Annular Cutter 9/16" Cutting Diameter 2" Depth of Cut, 3/4" Weldon Shank, Mag Drill Bit with Pilot Pin for Magnetic Drill Press
Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins
Product DescriptionAnnular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
11 HSS core drill bit cutting tool assortment set with Outside Diameter in inches: 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16",1 inch cutting depth for each drill cutter
CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Size: | 3/4 inch shank |
|---|
| Dimensions: | 8.267716527 X 3.149606296 X 8.0708661335 inches (Length X Width X Height) |
|---|
| Price: | $194.80 ($12.99 / Count) |
|---|
Annular Cutter Set 13 Pcs by S&F STEAD & FAST, Cutting Depth 1" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins
S&F STEAD & FAST Annular Cutter Set 13 Pcs, Cutting Depth 2" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins
Product DescriptionAnnular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
11 HSS core drill bit cutting tool kit with cutting diameter in inches: 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16", 2 inch cutting depth for each annular drill cutter
CNC-machined high precision drill bit cutter set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
IMPORTANT Drill single layers of materials only. This series of annular cutter is NOT designed for drilling of multiple layers.
Avoid premature failure of cutter by using a low feed rate when engaging the bit with the work piece, especially for the smaller cutters. Increase to recommended rate once bit is about 2-3mm in.
Secure workpiece firmly before drilling. If workpiece is less than 1/2” thick, use a 3/8” steel sheet under it to ensure the magnetic drill will grip it firmly. There should be no movement between the workpiece and bit during drilling.
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Size: | 3/4 inch shank |
|---|
| Price: | $241.80 |
|---|
S&F STEAD & FAST Annular Cutter Set 13 Pcs, Cutting Depth 2" Cutting Diameter 7/16" to 1-1/16" Inch, Mag Drill Bits Kit for Magnetic Drill Press, with 2 Pilot Pins
S&F STEAD & FAST Annular Cutter Arbor, Morse Taper MT2 to 3/4 Inch Weldon Shank, Annular Cutter Adapter Used on Drill Press for Annular Cutters
Product DescriptionQuality Materials: Annular Cutter Arbor made with proprietary premium chrome-molybdenum alloy steel for enhanced toughness and hardness; long-service life and suitable for professional use
Precision Machining: CNC-machined high precision arbor for use on drill press, milling machine or shop equipment with a Morse Taper intake No. 2; designed to control spindle runout
Superior Accessories: Matching high-grade accessories to complete the tool holder set: imported set screws, allen key and spring
Compatibility: Suitable for all annular cutters with ¾ inch Weldon Shank (MT2 to 3/4” Weldon Shank)
Packaging: a Arbor tool securely packed in plastic case for protection during transportation and long-term storage
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Size: | MT2-Standard |
|---|
| Dimensions: | 6.4 X 1.95 X 1.95 inches (Length X Width X Height) |
|---|
| Price: | $54.99 |
|---|
S&F STEAD & FAST Annular Cutter Arbor, Morse Taper MT2 to 3/4 Inch Weldon Shank, Annular Cutter Adapter Used on Drill Press for Annular Cutters
S&F STEAD & FAST Annular Cutter Set, 9pcs, 2" Depth of Cut, 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2" Cutting Diameter, 1pc Annular Cutter Extension 3"/75mm for 3/4" Weldon Shank
Product DescriptionAnnular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
Six HSS angular cutter bits with outside diameter in inches: 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2", 2 inch cutting depth for each annular drill bit cutter
Made with proprietary premium Chrome-Molybdenum alloy steel for enhanced toughness and hardness; long-service life and suitable for professional use.
Drill difficult to reach areas: weldon shank adapter extend cutter reach up to 3" or extend cutter reach over the side or through an exsisting hole.
What you will receive:sturdy aluminum case holding six pieces of 2 inch annular cutter and 2 pilot pins annular cutter extension x 1; hex shank x 1, securely packed in plastic case for protection during transportation and long-term storage.
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Price: | $271.99 ($30.22 / Count) |
|---|
S&F STEAD & FAST Annular Cutter Set, 9pcs, 2" Depth of Cut, 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2" Cutting Diameter, 1pc Annular Cutter Extension 3"/75mm for 3/4" Weldon Shank
S&F STEAD & FAST Carbide Annular Cutter Set 5 Pcs, 3/4 Weldon Shank, Depth of Cut 2", Cutting Diameter 5/8, 11/16, 3/4, 13/16, 1-1/2", Mag Drill Bits Kit with Pilot Pin x 2
Product DescriptionCarbide Tip: Annular drill bits made with tough and heat-treated alloy steel and European high-performance ultra-high hardness carbide tips (HRA 91-93) to ensure high efficiency and superior superior service life; no need for frequent replacements.
High Cutting Speed: With higher hardness and excellent heat resistance, each TCT annular cutter can cut at higher speeds, reducing machining time and saving on costs.
Engineered for Tough Materials: Designed specifically for cutting corroded or hard metals like stainless steel and tough alloys, these drill bits excel in demanding, high-precision applications, making them a reliable choice for professionals; the tungsten carbide tips keep their sharpness for longer.
Sizes: Carbide annular drill bit assortment consists of annular bits with cutting diameter of 5/8", 11/16", 3/4", 13/16" and 1-1/2" and a cutting depth of 2 inches
Precision Engineering: Each CNC-machined carbide tipped annular cutter has a 3/4 inch Weldon shank (with 2 flats) for secure clamping. Designed for smooth, reamed, burr-free edges of drilled holes, they deliver professional-quality results. Use firm, steady pressure throughout the cut for optimal performance.
Wide Compatibility: These annular cutters are compatible with various brands of magnetic drills, including Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, and Ruko. Caution: If using this annular cutter on a drill press, an additional annular cutter arbor is required (not included but available in our Amazon store).
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Model #: | 05060917981514 |
|---|
| Price: | $209.99 ($42.00 / Count) |
|---|
S&F STEAD & FAST Carbide Annular Cutter Set 5 Pcs, 3/4 Weldon Shank, Depth of Cut 2", Cutting Diameter 5/8, 11/16, 3/4, 13/16, 1-1/2", Mag Drill Bits Kit with Pilot Pin x 2
S&F STEAD & FAST 9/16" Annular Cutter, 1" cutting depth, max depth 2", max bore 1-9/16". Includes 1100W portable mag drill, 700 rpm, with carrying case
Product DescriptionSuperior Performance: Built with wear- and corrosion-resistant gibs and slide, this magnetic drill press ensures precise drilling and extended tool life, delivering smooth, burr-free holes when paired with the included annular bits
Compact yet Powerful: With 1100W of power, 700 rpm no-load speed, and a two-stage magnet offering 2248 lbf of adhesion, this drill press is lightweight (24 lbs) and compact (12"L x 7-1/8"W x 12"H) for easy handling without sacrificing performance
Versatile Cutter Compatibility: Designed to work with 3/4" Weldon shank annular bits up to 2" in depth, this drill press supports cutting diameters of up to 1-3/8" for HSS bits and 1-9/16" for carbide bits, giving you the flexibility to tackle a wide range of tasks
Complete Kit for Convenience: Comes with everything you need, including the magnetic drill, coolant tank, multiple hex wrenches, a 1/2" twist drill chuck with adapter, HSS annular cutters with pilot pins, and a rugged carrying case, making it ready for use right out of the box
Pack Content：1 magnetic drill, 1 5/8" x 1" annular cutter, 1 13/16" x 1" annular cutter, 1 9/16" x 1" annular cutter, 1 1/2" chuck and adapter, 3 hex wrench, 1 carrying Case, 1 coolant tank/tube, 1 safety strap, 1 product manual and 1 pilot pin
Product Details| Brand: | S&F STEAD & FAST |
|---|
| Price: | $652.98 (Save 10%) |
|---|
S&F STEAD & FAST 9/16" Annular Cutter, 1" cutting depth, max depth 2", max bore 1-9/16". Includes 1100W portable mag drill, 700 rpm, with carrying case
