Posted by
Thomas – October 17, 2011
- Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
- Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
- Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
- Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
- Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.
Amazon.com Product Description
The DELTA 15-334 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor that has a 24-volt push-button, magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
DELTA 15-334 15-Inch Variable Speed Drill Press w/Tilting Table Three Phase 200V w/Magnetic Starter
Posted by
Thomas – March 29, 2011
- Speeds from 400 to 5000 RPM
- Handwheel adjustment sets the speeds
- Large 2-1/4″ quill allows greater accuracy
- 3″ column diameter for maximum spindle stiffness
- 6″ stroke for deep hole applications
Product Description
J-A5818 15″ Vs Floor Drill Press, 230/460V, 3Ph, 3Hp Speeds from 400 to 5000 RPMHandwheel adjustment sets the speedsLarge 2-1/4″ quill allows greater accuracy3″ column diameter for maximum spindle stiffness6″ stroke for deep hole applicationsAccurate depth stop for precise hole depths1/2″ drill chuck and arborSafety collar FREE SHIPPING ON THIS ITEM WITHIN CONTINENTAL US 70.00 L. 31.00 W. 31.00 H.
JET J-A5818 15-Inch 3-Horsepower 230/460-Volt Three Phase Variable Speed Floor Drill Press
Posted by
Thomas – February 9, 2011
- Extra-large spindle bearings 6 PLUS 6 and -inchVS6-inch spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
- Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
- Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
- Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling…PLUS, the extra stroke required for clearing jigs and fixtures
- Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.
Amazon.com Product Description
The DELTA 15-344 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
DELTA 15-344 15-Inch Variable Speed Drill Press w/Production Table Three Phase 200V w/Magnetic Starter
Posted by
Thomas – April 14, 2010
- 3/4 HP three-phase 200-volt motor with a push-button magnetic starter
- Variable-speed drive lets you instantly select a spindle speed while running
- Extra-long quill travel for gang drilling
- Large, production table tilts in both directions and measures 15.5 x 21.5 inches
- Backed by a 2-year warranty
Amazon.com Product Description
The DELTA 15-344 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
DELTA 15-344 15 inch Variable Speed Drill Press w/Production Table Three Phase 200V w/Magnetic Starter
Posted by
Thomas – January 24, 2010
Posted by
Thomas – January 6, 2010
- 3/4 HP three-phase motor with a push-button, magnetic starter
- Six speeds varying from 425 to 5500 RPM
- Extra-long quill travel for gang drilling
- Tilting table measures 11 x 14 inches
- Backed by a 2-year warranty
Amazon.com Product Description
The DELTA 15-234 15-inch features a 3/4 HP three-phase motor that has a 24-volt push-button, magnetic starter. It provides six speeds varying from 425 to 5500 RPM, and is capable of all drill jobs on different materials. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. The DELTA 15-234 15 is backed by a two-year warranty.
DELTA 15-234 15-Inch 6 Speed Drill Press with Tilting Table Three Phase and Magnetic Starter
Posted by
Thomas – January 2, 2010
- 3/4 HP three-phase motor with a push-button, magnetic starter
- Six speeds varying from 425 to 5500 RPM
- Extra-long quill travel for gang drilling
- Large tilting production table measures 15.5 x 21.5 inches
- Backed by a 2-year warranty
Amazon.com Product Description
The DELTA 15-263 6 Speed Drill Press features a 3/4 HP three-phase motor that has a 24-volt push-button, magnetic starter. It provides six speeds varying from 425 to 5500 RPM, and is capable of all drill jobs on different materials. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. The DELTA 15-263 15-inch 6 Speed Drill Press w/Tilting Table Single Phase w/Magnetic Starter is backed by a two-year warranty.
DELTA 15-263 15 inch 6 Speed Drill Press w/Production Table Three Phase w/Magnetic Starter
Posted by
Thomas – January 2, 2010
- 3/4 HP three-phase 200-volt motor with a push-button, magnetic starter
- Variable-speed drive lets you instantly select a spindle speed while running
- Extra-long quill travel for gang drilling
- Tilting table measures 11 x 14 inches
- Backed by a 2-year warranty
Amazon.com Product Description
The DELTA 15-334 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor that has a 24-volt push-button, magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. The DELTA 15-334 is backed by a two-year warranty.
DELTA 15-334 15 inch Variable Speed Drill Press w/Tilting Table Three Phase 200V w/Magnetic Starter
Posted by
Thomas – December 28, 2009
- 1/2 HP single-phase motor
- 16 speeds from 175 RPM to 8200 RPM
- Head tilts 45 degrees left or right
- Large cast iron table measures 26 x 18 inches
- Backed by a 2-year warranty
Amazon.com Product Description
The DELTA 15-127 15-inch RAM Radial Drill Press Three Phase provides the versatility of a power tool with the capacity and performance of a machine tool. The drill features a 1/2 HP three-phase motor and provides a range of 16 different speeds that vary from as low as 175 RPM up to 8200 RPM. The large 26 x 18-inch table is made of cast iron and provides four T-Slots and an oil trough that can handle a half-inch pipe. The head tilts 45-degrees in either direction, and has an easy-to-read scale. With a 42-inch column, the press has extra spindle nose to table capacity, and has a six-inch quill stroke with a ram travel of 17 inches. The press is smartly designed with convenient controls such as an adjustable quill return spring, quill lock knob, and more. The 15-127 includes six-inch spindle travel, No. 2 MT spindle, 42-inch column, 65-863 floor stand, head, jackshaft assembly, ram, cradle, column, table, raising mechanism, belt guards, motor pulley, 49-287 V-belt, 49-105 V-belt, motor and controls. It is backed by a two-year warranty.
DELTA 15-127 15 inch RAM Radial Drill Press Three Phase
