Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.
Amazon.com Product Description The DELTA 15-334 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor that has a 24-volt push-button, magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
Extra-large spindle bearings 6 PLUS 6 and -inchVS6-inch spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling…PLUS, the extra stroke required for clearing jigs and fixtures
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.
Amazon.com Product Description The DELTA 15-344 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
3/4 HP three-phase 200-volt motor with a push-button magnetic starter
Variable-speed drive lets you instantly select a spindle speed while running
Extra-long quill travel for gang drilling
Large, production table tilts in both directions and measures 15.5 x 21.5 inches
Backed by a 2-year warranty
Amazon.com Product Description The DELTA 15-344 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
3/4 HP three-phase motor with a push-button, magnetic starter
Six speeds varying from 425 to 5500 RPM
Extra-long quill travel for gang drilling
Tilting table measures 11 x 14 inches
Backed by a 2-year warranty
Amazon.com Product Description The DELTA 15-234 15-inch features a 3/4 HP three-phase motor that has a 24-volt push-button, magnetic starter. It provides six speeds varying from 425 to 5500 RPM, and is capable of all drill jobs on different materials. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. The DELTA 15-234 15 is backed by a two-year warranty.
3/4 HP three-phase motor with a push-button, magnetic starter
Six speeds varying from 425 to 5500 RPM
Extra-long quill travel for gang drilling
Large tilting production table measures 15.5 x 21.5 inches
Backed by a 2-year warranty
Amazon.com Product Description The DELTA 15-263 6 Speed Drill Press features a 3/4 HP three-phase motor that has a 24-volt push-button, magnetic starter. It provides six speeds varying from 425 to 5500 RPM, and is capable of all drill jobs on different materials. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. The DELTA 15-263 15-inch 6 Speed Drill Press w/Tilting Table Single Phase w/Magnetic Starter is backed by a two-year warranty.
3/4 HP single-phase motor with a push-button, magnetic starter
Six speeds varying from 425 to 5500 RPM
Extra-long quill travel for gang drilling
Large tilting production table measures 15.5 x 21.5 inches
Backed by a 2-year warranty
Amazon.com Product Description The DELTA 15-262 6 Speed Drill Press features a 3/4 HP single-phase motor that has a 24-volt push-button, magnetic starter. It provides six speeds varying from 425 to 5500 RPM, and is capable of all drill jobs on different materials. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. The DELTA 15-262 is backed by a two-year warranty.
3/4 HP three-phase motor with a push-button, magnetic starter
Variable-speed drive lets you instantly select a spindle speed while running
Extra-long quill travel for gang drilling
Tilting table measures 11 x 14 inches
Backed by a 2-year warranty
Amazon.com Product Description The DELTA 15-333 Variable Speed Drill Press features a 3/4 HP three-phase motor that has a 24-volt push-button, magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. The DELTA 15-333 is backed by a two-year warranty.
3/4 HP three-phase 200-volt motor with a push-button, magnetic starter
Variable-speed drive lets you instantly select a spindle speed while running
Extra-long quill travel for gang drilling
Tilting table measures 11 x 14 inches
Backed by a 2-year warranty
Amazon.com Product Description The DELTA 15-334 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor that has a 24-volt push-button, magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. The DELTA 15-334 is backed by a two-year warranty.
