Tag: Speed
where can i find a manual or replacement parts for a Pratco 16 speed heavy duty drill press?
Posted by – December 10, 2011
Is there such thing as a 16 speed drill press? ASAP!?
Posted by – December 6, 2011
I found a drill press on craig’s list that I’m interested in. It says it’s a 16 speed. Is that a misprint, or do those exist? I need to know ASAP!!
Thanks so much!
Thanks guys!
16 Speed Drill Press
Posted by – October 27, 2011
Product Description
DP16UL Features: -5/8” Chuck capacity. -Cast iron table, base and drill body. -Max Speed: 260-4, 220 RPM. -Motor: 0.5 HP, 4.8 Amp, 120V / 60Hz, 550W. -12” diameter dry round table which tilts 90 degrees left to right. -Construction Material: Metal. -Dimensions: 9.5” H x 19” W x 55” D.
DELTA 15-334 15-Inch Variable Speed Drill Press w/Tilting Table Three Phase 200V w/Magnetic Starter
Posted by – October 17, 2011
- Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
- Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
- Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
- Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
- Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.
Amazon.com Product Description
The DELTA 15-334 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor that has a 24-volt push-button, magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
DELTA 15-334 15-Inch Variable Speed Drill Press w/Tilting Table Three Phase 200V w/Magnetic Starter
DELTA 15-261 15-Inch 6 Speed Drill Press w/Production Table Single Phase
Posted by – October 15, 2011
- Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubrcated-for-life ball bearings.
- Wide, test-proven speed range gives you a true 10-to-1 speed ratio.
- Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring loaded, rubber-tipped plunger that quickly restores correct belt tension.
- Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
- Six speeds offer unbelievably wide range of speeds with a low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500 rpm- 11.8 to 1 speed ratio.
Amazon.com Product Description
The DELTA 15-261 features a 3/4 HP single-phase motor that provides six speeds varying from 425 to 5500 RPM, and is capable of all drill jobs on different materials. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
DELTA 15-261 15-Inch 6 Speed Drill Press w/Production Table Single Phase
5 Speed Mini Drill Press UL
Posted by – October 1, 2011
Product Description
UPC: 794685123580
Motor power of 1/2HP with 120V/60Hz. Max. drill capacity of 1/2″. Spindle travel of 2″ and spindle taper of MT2. Table size is 6.3″ x 6.3″ and base size is 8″ x 12″.
Delta 15-343 15-inch Variable Speed Production Floor Drill Press
Posted by – September 11, 2011
Product Description
The Delta 15-343 15-inch Variable Speed Production Floor Drill Press features a 3/4 HP single-phase motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. Features: Extra-large spindle bearings and spindle pulleys that are supported by lubricated-for-life ball bearings Quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs Snubber feature holds speed settings constant no matter the load conditions. Table tilts 90 degrees in both directions What’s in The Box: Delta 15-343 15-inch Variable Speed Production Floor Drill Press Self-Ejecting Chuck Key Self-Locking Depth Stop Depth Gauge
Delta 15-343 15-inch Variable Speed Production Floor Drill Press
Neiko USA 5 Speed Mini Drill Press w/Laser Guide
Posted by – August 22, 2011
Product Description
5 Speed bench top drill press by Neiko Tools USA. Features: 120 volt, 1/3 HP, 300 Watt, all ball bearing motor, 5 speeds from 620-3100 RPM, belt drive, work table turns, tilts, and is fully adjustable up or down. Built-in laser guide. CSA/CUS Approval. Dimensions: Table: 6.5″ x 6.5″. Column: 1 7/8″, Base: 11″ x 7″. Height: 24″. Weight: 45 pounds. Spindle: Morse taper JT-33 supported by ball bearings. Chuck: 1/2″. Spindle Stroke: 2″. Includes: depth gauge, assembly tools. Perfect for drilling steel, cast iron, aluminum, brass, wood, or plastic.
SKU: 9220S
Neiko USA 5 Speed Mini Drill Press w/Laser Guide
Speedway 8641 5 Speed Mini Drill Press
Posted by – June 1, 2011
- Rated input power: 120V~60Hz, 250W; No load speed: 1,750 RPM
- Maximum Drilling Depth: 1 15/16th inch; Chuck: 1/16 inch – 1/2 inch
- Table and base size: 12 5/16 inch; Overall height: 22 13/16
- Spindle speed: 5 speed; Spindle/Column: 4 3/32 inches; Spindle Tae: MT2
- Distance Spindle/Table: 7 7/8 inch; Distance Spindle/Base: 11 7/16 inch
Speedway 8641 5 Speed Mini Drill Press
JET Variable Speed Drill Press – 20in., Model# J-2223vs
Posted by – May 10, 2011
- External #3 Morse taper
- Front-mounted positive control depth stop
- 6in. quill travel
- Massive 3in. quill diameter
- Front or side rack and worm gear table raiser
Product Description
The JET J-2223vs Drill Press features spindle speeds from 300 to 2000 RPM, a heavy-duty cast iron design and large precision-ground T-slot production table for easy set ups. HP: 2, Volts: 220/440V, pre-wired 440V, Speed (RPM): 300 – 2,000, Speeds (qty.): Variable, Vertical Stroke: 6, 360deg Head Swivel: Yes, Draw Bar: No, Swing: 20in., Drilling Capacity (in.): 1 1/4, Worktable L x W (in.): 18 x 15, Stand Included: No, Dimensions L x W x H (in.): 34 x 27 x 78
JET Variable Speed Drill Press – 20in., Model# J-2223vs