Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.
Amazon.com Product Description The DELTA 15-334 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor that has a 24-volt push-button, magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubrcated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring loaded, rubber-tipped plunger that quickly restores correct belt tension.
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
Six speeds offer unbelievably wide range of speeds with a low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500 rpm- 11.8 to 1 speed ratio.
Amazon.com Product Description The DELTA 15-261 features a 3/4 HP single-phase motor that provides six speeds varying from 425 to 5500 RPM, and is capable of all drill jobs on different materials. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
Extra-large spindle bearings 6 PLUS 6 and VS6- spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings. Massive quill is a full 2-inch diameter.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.
Amazon.com Product Description The DELTA 15-331 Variable Speed Drill Press features a 3/4 HP single-phase motor that has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
Product Description J-A5818 15″ Vs Floor Drill Press, 230/460V, 3Ph, 3Hp Speeds from 400 to 5000 RPMHandwheel adjustment sets the speedsLarge 2-1/4″ quill allows greater accuracy3″ column diameter for maximum spindle stiffness6″ stroke for deep hole applicationsAccurate depth stop for precise hole depths1/2″ drill chuck and arborSafety collar FREE SHIPPING ON THIS ITEM WITHIN CONTINENTAL US 70.00 L. 31.00 W. 31.00 H.
Machine tool capacity and performance combined with power tool adaptability and versatility
Extra drilling capacity allows you to take the drill right to the work
Built in jackshaft assembly provides 16 different speeds from 175 rpm to 8,200 rpm
Head tilts a full 45 degree right or left with easy-to-read head tilt angle scale that permits setting of head at exact angle
Big cast-iron machined table has four T-Slots and oil trough tapped to accommodate 1/2-inch pipe; 42-inch column for extra spindle nose to table capacity and a big 6-inch quill stroke with a ram travel of 17-inch
Amazon.com Product Description The DELTA 15-126 15-inch RAM Radial Drill Press Single Phase provides the versatility of a power tool with the capacity and performance of a machine tool. The drill features a 1/2 HP single-phase motor and provides a range of 16 different speeds that vary from as low as 175 RPM up to 8200 RPM. The large 26 x 18-inch table is made of cast iron and provides four T-Slots and an oil trough that can handle a half-inch pipe. The head tilts 45-degrees in either direction, and has an easy-to-read scale. With a 42-inch column, the press has extra spindle nose to table capacity, and has a six-inch quill stroke with a ram travel of 17 inches. The press is smartly designed with convenient controls such as an adjustable quill return spring, quill lock knob, and more. The 15-126 includes six-inch spindle travel, No. 2 MT spindle, 42-inch column, 65-863 floor stand, head, jackshaft assembly, ram, cradle, column, table, raising mechanism, belt guards, motor pulley, 49-287 V-belt, 49-105 V-belt, motor and controls.
Extra-large spindle bearings 6 PLUS 6 and -inchVS6-inch spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling…PLUS, the extra stroke required for clearing jigs and fixtures
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.
Amazon.com Product Description The DELTA 15-344 Variable Speed Drill Press features a 3/4 HP three-phase 200-volt motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you’ll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings “6 PLUS 6″ and “VS6″ spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The production table tilts 90 degrees in both directions and measures 15.5 x 21.5 inches (12 x 18 inches inside of coolant trough). Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings in an enclosed quill for longer life.
Massive T-slotted production work table (Model J-2550 only)
Table tilts 45
Product Description Includes J-2550, 20-in Floor Model Drill Press 1HP – 354402
