This video is from the full review on www.newwoodworker.com. See the full review with more photos and details at the link below!. www.newwoodworker.com
Tag: Bench
JET JDP-15M Bench Mount Drill Press Review
Posted by – November 28, 2011
Drill Press – 26″ Bench Top Radial Drill Press
Posted by – August 28, 2011
- Increased drilling versatility with variable spindle-to-column swing
- Swing easily adjusts from 4″ to 13″ allowing center-drilling on 26″-diameter object
- Spindle tilts to 90-degrees L/R, table tilts 45-degrees L/R, 4″ spindle travel
- Heavy-duty 1/2 HP commercial-grade motor, 5 speeds from 480 – 3550 RPM
- 1/2″ chuck with MT2 taper spindle
Product Description
An outstanding value in a well-built radial drill press. Overall dimensions: height 28-1/2″, top width 6-1/2, base 13″L x 5″W, 5″ support fence for stability. Table size 9″W x 8″L, base size 13″L x 8-3/4″W. Maximum distance to table 9″ (spindle), 7″ (chuck); maximum distance from spindle end to table surface 10-1/2″. 64 lbs.
Drill Press – 26″ Bench Top Radial Drill Press
Bench Drill Press Stand Drilling Machinist Tool New
Posted by – May 26, 2011
Product Description
Bench Drill Press Stand Drilling Machinist Tool New. This a new adjustable drill stand. Perfect for shop or home use. Not for use with a Dremel tool. Has 2 holes for mounting. It measures approximately 6 1/4″ x 9″ x 17 1/4″ (158.75 x 228.6 x 438.15 mm). We work hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.
Bench Drill Press Stand Drilling Machinist Tool New
Wilton 15-Inch Drill Press Bench Model, 115/230V 1PH, 1HP
Posted by – April 8, 2011
- Large production work table gives the operator the room to work and support for the job
- Offers a greater range in spindle speeds than others in this class
- Larger quill which provides greater accuracy
Product Description
The Wilton A3836 15 inch 6-speed Drill Press is what your shop is missing. With six speeds, you are sure to find the speed that meets your needs. Standing at 70-inches tall, the Wilton A3836 gives you the stability most other drill presses lack.
Wilton 15-Inch Drill Press Bench Model, 115/230V 1PH, 1HP
Westward 1KEN4 Bench Drill Press, 12 In, 1/3 HP, 115V, 6A
Posted by – April 6, 2011
Product Description
Bench Drill Press, Swing 12 In, Motor HP 1/3, Voltage 115, 6 Amps AC, Capacity Cast Iron 1/2 In, Capacity Steel 1/2 In, Spindle Speeds 12, 250-3100 RPM, Chuck Size 1/2 In, Spindle Taper JT33, Spindle Travel 2 3/8 In, Spindle to Table 17 3/4 In, Quill Dia 1 9/16 In, Table Work Surface 8 5/8 x 10 5/16 In, Belt Table Tilt Angle Left/Right 45 Deg, Table Slots 1/2 In, Overall Height 37 5/16 In, Overall Width 11 1/4 In, Overall Depth 21 1/2 In, Includes Laser, Hex Wrenches, AAA Batteries
Westward 1KEN4 Bench Drill Press, 12 In, 1/3 HP, 115V, 6A
Powermatic 1791310 PM701 3/4 Horsepower Bench Mortiser
Posted by – March 19, 2011
- 3/4-horsepower bench mortiser with 1/2-inch chuck, in-line depth stop, and 5/8- and 3/4-inch bushing sizes
- Operates up to 1,725 rpm, 5-1/2-inch head stroke capacity, reversible handle for left/right-hand operation
- Some assembly required
- Includes mortiser, 3/4-inch chisel bushing, chuck extension adaptor, chuck key, and handle
- 16-5/16-by-13/3-4-inch base; 93-pounds; 1-year warranty
Product Description
Includes PM701 3/4 HP Bench Top Deluxe Mortiser – 1791310, Chisel & Tool Holder w/ Sharpening Stone, 1/2-in Drill Chuck, 4-in Chuck Key, Removable Safety Switch Key
Powermatic 1791310 PM701 3/4 Horsepower Bench Mortiser
ProLine 5 Speed Bench Top Drill Press
Posted by – February 27, 2011
Product Description
ProLine Mini Drill Press. Benchtop model featres five speeds from 760 to 3070 RPM. Adjustable work table tilts, turns, and swings. Full size 1/2″ chuck. Features a heavy duty 1/2 HP all ball bearing motor.
li5 Speed Drill Press by ProLine
li1/2 HP Ball Bearing Motor
li120 Volts, 60Hz
li5 Speeds 760 to 3070 RPM
liIncludes Adjustable Work Table
liChuck Size: 1/2″
liUL Listed and Approved
liOperators Manual
liMSRP $179.95
SKU: 9102L
ProLine 5 Speed Bench Top Drill Press
JET J-2530 15-Inch 3/4-Horspower 115-Volt Bench Model Drill Press
Posted by – February 13, 2011
- Cast iron head
- Large quill allows greater accuracy
- Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings in an enclosed quill for longer life.
- Table tilts 45
- Large ground steel column diameter for maximum head and table support
Product Description
This JET 16-speed drill press has a 115V, single-phase motor. 16 spindle speeds ensure proper application for a variety of different jobs. Large quill allows for greater accuracy. Head casting features a permanently lubricated ball bearing spindle assembly, with four heavy-duty ball bearings in an enclosed quill for longer life. HP: 3/4, Volts: 115, Speed (RPM): 200 – 3,630, Speeds (qty.): 16, Vertical Stroke: 3 1/8, 360deg Head Swivel: Yes, Draw Bar: No, Swing: 15in., Drilling Capacity (in.): 5/8 cast iron, Chuck Size (in.): 5/8, Worktable L x W (in.): 10 x 10, Light Included: No, Stand Included: No, Dimensions L x W x H (in.): 26 x 14 x 39
JET J-2530 15-Inch 3/4-Horspower 115-Volt Bench Model Drill Press
craftsman bench top drill press.?
Posted by – June 9, 2010
My wife just bought me a craftsman drill press. While assembling it I came to the part of putting in the abor. It says to open the jaws of the chuck wide so not to damage the chuck and then put a piece of wood under the chuck and hit it with a mallet. I did this but I notice that with a little pull on it downwards it comes out. Is this Normal? The arbor has two narrow edges where it fits into the press. Also it has a lazer crosshair centering. Does this need changing often?
Related Blogs
- Starting a Home Workshop? « Power Tools
- ABOR settles lawsuit with Havasupai tribe over blood samples | ASU News | The State Press | Arizona State University
- e-agents; Now Supporting ACTRIS/ABoR MLS! «
what bench top drill press has recieved the most customer satisfaction?
Posted by – June 4, 2010
looking to purchase one and want feedback