Posted by
Thomas – August 12, 2011
- Recommended for materials with a brinell harness number up to 280
- Cut clean, bur free holes
- Precision pilot pins eject the center as a plug of steel
- Cuts cast iron, steel and ultra hard or exotic alloys
- Application use must be with Magnetic or stationary drill presses.
Product Description
The Champion XL100-3/4 rotobrute ” HSS annular cutter with 1″ depth is made from M2 Steel. Featuring Champion’s exclusive PLUS20 surface treatment it provides cleaner cuts, positive slug ejection and longer tool life. This cutter is for use with a magnetic or stationary drill press to create clean cuts and bur free holes.
Champion XL100-3/4 Rotobrute 3/4-Inch HSS Annular Cutters, 1-Inch Depth
Posted by
Thomas – May 10, 2010
- RotoBrute Cobalt Stack Cut Annular Cutters are made to cut cleanly through several layers of steel and positive slug ejection.
- Recommended for materials with a brinell harness number up to 275.
- Cut clean, bur free holes
- Cuts cast iron, steel and ultra hard or exotic alloys
Champion XL200STK-3/4-Inch RotoBrute 3/4-Inch Cobalt Stack Cut Annular Cutter, 2-Inch Depth
Related Blogs
Posted by
Thomas – January 20, 2010
Posted by
Thomas – January 15, 2010
- Ability to cut 1/2-Inch up to 1-1/4
- Can cut up to 108,000 lbf/in in tensile strength
- Fairly priced for high performance
- New to Fein a Weldon shank so you can use Fein’s high quality annular cutters on any competitive mag drill
- Also suitable for aluminum and other non-ferrous metals
Product Description
Metal Core Bits
Fein 63127361010 3/4-Inch and 1-Inch HSS Nova 1-Inch Annular Cutter
Posted by
Thomas – January 15, 2010
- Quick in shank for tooless change
- Ultra long life thanks to innovative cutting geometry outlasting traditional carbide tipped mag drill bits
- Fein ultra mag drill bits can be used for stainless steel and non-ferrous metals
- Safer due to a new cutting geometry with a short chip break. This gives you a better view of your work piece
- 40-Percent more efficient than twist drilling
Product Description
Includes 3/4″ HM Ultra Metal Core Bit – 63127387010
Fein 6-31-27-387-01-0 3/4-Inch HM-Ultra 2-Inch Annular Cutter
Posted by
Thomas – January 13, 2010
- Ability to cut 7/16 of an Inch up to 1-1/4-Inch with 1-Inch depth
- Can cut up to 130,000 lbf/in tensile strength
- 5-Percent cobalt hardened for longer lasting life and quicker cuts
- Quick in shank for ease of use and faster rate of work
- Also suitable for aluminum and other non-ferrous metals
Product Description
Metal Core Bits
Fein 63127414010 3/4-Inch and 1-Inch HSS Prima 1-Inch Annular Cutter
Posted by
Thomas – January 6, 2010
Product Description
The Radial Drill Press is constructed with a rack & pinion design for positioning the horizontal arm, allowing the machine to operate as a regular drill press, plus much more. Features five spindle speeds, 620-3100 rpm. Adjust table height with the turn of a handle. Head tilts 45 right, 90 left. Wt. 135 lbs.
Rikon 34-inch Radial Drill Press Floor Model – 80830
Posted by
Thomas – December 28, 2009
- 3/4 inch capacity, 11.5 amp motor, 350 RPM
- Dual mount gear case/reverse mount for tight quarter drilling
- Taps up to 1-inch/14 threaded hole
- Develops up to 1670 pounds of drill point pressure with a 1-inch steel plate
- Limited warranty, 30-day no-risk trial
Product Description
This heavy-duty unit is built for production drilling and will take the toughest drilling jobs. This unit has 350 RPM, geared low for maximum torque. Use the larger Model 4203 adjustable base (Item# M0094) for this powerhouse, and no job is too large. U.S.A. Speed (RPM): 350, Drilling Capacity (in.): 3/4, Chuck Size (in.): 3/4, Stand Included: No
Milwaukee 4262-1 11.5 Amp 3/4-Inch Motor for Electromagnetic Drill Press with Chuck
Posted by
Thomas – December 28, 2009
- 12.5 amp motor
- 3/4″ drill capacity
- 350 RPM no load speed
- Solid state electronic switching
- Feedback speed control
Product Description
This combination unit features the 4202 fixed position, variable speed base and the 4262-1 3/4in. drill motor. The electromagnetic variable speed base features solid state electronic switching and an 9in. drill travel. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker. U.S.A. Volts: 120, Speed (RPM): 350, Drilling Capacity (in.): 9in. drill travel, Chuck Size (in.): 3/4
Milwaukee 4210-1 12.5 Amp Electromagnetic Drill Press with 3/4-Inch Motor and Chuck
Posted by
Thomas – December 26, 2009
- 12.5 amp motor
- 3/4″ drill capacity
- 350 RPM no load speed
- Solid state electronic switching
- Feedback speed control
Product Description
This combination unit features the 4203 adjustable position, variable speed base and the 4262-1 3/4in. drill motor. The electromagnetic variable speed adjustable base features solid state electronic switching and an 9in. drill travel. Adjustable position on this base makes lining up the bit easier and faster. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker. U.S.A. Volts: 120, Speed (RPM): 350, Drilling Capacity (in.): 11in. drill travel, Chuck Size (in.): 3/4
Milwaukee 4206-1 12.5 Amp Electromagnetic Drill Press with 3/4-Inch Motor and Chuck
